Been shooting field and 3D with one of the Digital React 1-pin for around 4 months. Sighted in using 20m then 30m walk-back. Set the distances in the sight. Continued to 40, 50, 60 and 70m. The elevations calculated by the sight were as accurate as I can shoot at those distances. Super easy. Can set distance units for Yards or Metres and multiple profiles stored in the sight permit different elevation calculations for different arrows. Good, solid sight!!!
Fastest sight I've ever setup. Spent 10 minutes dialing in my 20, then shot it through a chrono. Popped the fps into the sight and went to my local range and tested it out to 100 yards. Spot on.
Let's get REAL on Sights (Sight/Scope combinations) for TAC/3D. Mounted a Shrewd Optum 40mm Single .015 Pin with a 5x X-Focus Achromat Doublet to the Trophy Ridge Digital React Sight, **Listen UP !!!** -- it is THE END for: HHA, Axcel, Bowfinger, Spot Hogg, et al (ALL others) - Instantly OBSOLETE !! 1. 1st/2nd/3rd axis are a breeze. 2. You can actually "SEE" the Yardages... from 8 YARDS AWAY !! (hey older guys, Do I Have Your Attention ? Lols); btw ==> in .5 yard (or meter) increments. FYI - it's DEAD NUTS at every single .5 yard increment !! **3. Sight Tape days are O V E R !! Hallelujah** Not only fumbling around with and sticking them on precisely, everyone knows that it takes months to get an 'ACTUAL' accurate sight tape (took me 3 months to get my 4th Sight Tape Dead On - shooting "ALOT"); Now, mere minutes !!!! 4. Separate (from the main wheel) Micro Adjust Elevation so you can MAXIMIZE full yardage range. 5. Dialing in the DIGITAL Sight Scale out to 125 yards literally took me 5 Minutes !! Sighted in the 20 yard (Traditional) then put in my Chrony Speed --- DONE !!!! So you say, "where can I find an accurate Chrony?" Well you really don't need to, just get within Hand Grenade Range (Arrow Speed Calculator will do the job). If you're hitting low, decrease bow speed (in the sight program). Hitting high, increase bow speed (in the sight program). And as an ancillary benefit - once you're on, you now have your "ACTUAL" Bow Speed. 6. You can program 5 different profiles (arrow wt and/or draw wt changes) and/or Different Bows. 7. With the Universal Scope Mount (Sold Separately - $30), you can add the scope of your choice to the sight. 8. Charged it overnight as directed when it arrived. Shot Three 3D Tourneys, forgot to turn it off on the last one and realized it later that evening (it was on for 7 hours), checked the Battery - Still Full. Hope it helps, John
I 100% agree with your comment. I have the digital with a UV3xl and I absolutely love the combination over my HHA. Only downfall is it’s a little heavy but I don’t mind.
Been shooting field and 3D with one of the Digital React 1-pin for around 4 months. Sighted in using 20m then 30m walk-back. Set the distances in the sight. Continued to 40, 50, 60 and 70m. The elevations calculated by the sight were as accurate as I can shoot at those distances. Super easy. Can set distance units for Yards or Metres and multiple profiles stored in the sight permit different elevation calculations for different arrows.
Good, solid sight!!!
Fastest sight I've ever setup. Spent 10 minutes dialing in my 20, then shot it through a chrono. Popped the fps into the sight and went to my local range and tested it out to 100 yards. Spot on.
Let's get REAL on Sights (Sight/Scope combinations) for TAC/3D.
Mounted a Shrewd Optum 40mm Single .015 Pin with a 5x X-Focus Achromat Doublet to the Trophy Ridge Digital React Sight, **Listen UP !!!** -- it is THE END for: HHA, Axcel, Bowfinger, Spot Hogg, et al (ALL others) - Instantly OBSOLETE !!
1. 1st/2nd/3rd axis are a breeze.
2. You can actually "SEE" the Yardages... from 8 YARDS AWAY !! (hey older guys, Do I Have Your Attention ? Lols); btw ==> in .5 yard (or meter) increments. FYI - it's DEAD NUTS at every single .5 yard increment !!
**3. Sight Tape days are O V E R !! Hallelujah** Not only fumbling around with and sticking them on precisely, everyone knows that it takes months to get an 'ACTUAL' accurate sight tape (took me 3 months to get my 4th Sight Tape Dead On - shooting "ALOT"); Now, mere minutes !!!!
4. Separate (from the main wheel) Micro Adjust Elevation so you can MAXIMIZE full yardage range.
5. Dialing in the DIGITAL Sight Scale out to 125 yards literally took me 5 Minutes !! Sighted in the 20 yard (Traditional) then put in my Chrony Speed --- DONE !!!! So you say, "where can I find an accurate Chrony?" Well you really don't need to, just get within Hand Grenade Range (Arrow Speed Calculator will do the job). If you're hitting low, decrease bow speed (in the sight program). Hitting high, increase bow speed (in the sight program). And as an ancillary benefit - once you're on, you now have your "ACTUAL" Bow Speed.
6. You can program 5 different profiles (arrow wt and/or draw wt changes) and/or Different Bows.
7. With the Universal Scope Mount (Sold Separately - $30), you can add the scope of your choice to the sight.
8. Charged it overnight as directed when it arrived. Shot Three 3D Tourneys, forgot to turn it off on the last one and realized it later that evening (it was on for 7 hours), checked the Battery - Still Full.
Hope it helps,
John
Best comment ever! Haha the info is there🤘🏼 appreciate your input!!
I 100% agree with your comment. I have the digital with a UV3xl and I absolutely love the combination over my HHA. Only downfall is it’s a little heavy but I don’t mind.