I tried enamaling many years ago and although it was fun, I never fund it satisfying, probably because my results were never satisfying, they were o.k. After watching Jan’s videos over and over again I finally grasp the concepts that I never fond anywhere else and for the very first time am dry sifting my enamels with the most satisfying results. Heaps of appreciation for the videos and the sharing of knowledge.
AGREE WITH ALL! Jan's videos are so crammed full of great instruction and helpful tips and I have learned so much from her! Keep 'em coming, Jan and CT!
Don't waste your time annealing it when you sand the piece down...its not work hardened that way...only thru rolling, hammering, stretching and forming like bending, twisting...but sanding and grinding does not aneal the piece...it removes material❤🎉
Thank you for these wonderful videos. I really appreciate your expertise and your easy step by step instructions.. I am a silversmith and I have never done enameling. I am looking forward to trying transparent enameling on textured pieces. I would like to know if it’s possible to enamel a piece that has a bezel for a stone within the enameled piece? What process and how to keep the enamel off of the bezel. Would the wet enamel process work best?
Hello, thank you for watching. Yes, wet packing would be the best process for a bezel. You can watch how this is done 20 minutes into our video here: ua-cam.com/video/O0oz5rJ5Zdc/v-deo.htmlsi=QmsvEGZue_tsFjT6
Hi Suzanne, this is the Spra-tool. You can find it here: www.cooltools.us/ProductDetails.asp?ProductCode=ACC-217 If you are interested in all the products used in this video, you can find a list of all the products below the video here: www.cooltools.us/Video-Enameling-Techniques-Tube-Riveting-s/2596.htm Hope this helps, thank you for watching!
The wall thickness is .51mm. You can find the tubing she uses here: cooltools.us/collections/enameling-techniques-tube-riveting-by-jan-harrell-1/products/999-fine-silver-seamless-tubing-soft For all the products used, you can find them under the video here: cooltools.us/collections/enameling-techniques-tube-riveting-by-jan-harrell-1 Thanks for watching!
Hello, this is the fat shields template. You can find it here: www.cooltools.us/Jewelry-Shape-Template-Fat-Shields-p/tmp-453.htm Please feel free to reach out if you need anything else, we're always happy to help!
Hi Kathy, the tube cutting holder Jan uses can be found here: www.cooltools.us/Tube-Cutting-Holder-p/hol-117.htm If you are interested in any other products that Jan uses in this video you can find the complete list and links below the video here: www.cooltools.us/Video-Enameling-Techniques-Tube-Riveting-s/2596.htm Have a good day!
Hi, you can find the Surfactant Jan uses in this vide here: www.cooltools.us/Surfactant-Metal-Prep-for-Enameling-2-oz-p/enl-016.htm Thanks for watching!
@@marciaeveritt7958 Thank you for clarifying. You can also use design stencils or Sunshine Enamels to paint a design on for the back. This would be our recommendation, unfortunately Jan does not have a video specifically showing what she does to the back.
I am not familiar with this and I am not a jewellery maker. If you put a list of materials will be helpful. And please don’t avoid steps because is confused. Your classes are very good but not for beginners like me. Thanks to share 😊
Hello, you can find all of the materials used in this video, below the video here: cooltools.us/collections/enameling-techniques-tube-riveting-by-jan-harrell-1 Thanks for watching!
Jan Harrell - just what the doctor ordered! Your presentation is perfect... Thank you! Linda
I tried enamaling many years ago and although it was fun, I never fund it satisfying, probably because my results were never satisfying, they were o.k. After watching Jan’s videos over and over again I finally grasp the concepts that I never fond anywhere else and for the very first time am dry sifting my enamels with the most satisfying results. Heaps of appreciation for the videos and the sharing of knowledge.
AGREE WITH ALL! Jan's videos are so crammed full of great instruction and helpful tips and I have learned so much from her! Keep 'em coming, Jan and CT!
This is an amazing video. Jan is such a good teacher and so knowledgeable.
I just watched the rivet video. So informative for both enameling and metalwork! I’m so inspired, thank you!
You are the most wonderful teacher thank you! Lovely work indeed
Such an excellent video with so much great information. Very thorough explanations of what and why! Thank you!!
Thank you for a great video Jan. This suits my style perfectly! Thanks for sharing your skills.
All beautiful!❤Thank you!
Fantastic Jan, this was exactly what I needed to learn! Thank you so much!!!!
What a great video! Thank you for sharing your knowledge with us - I really enjoyed this 😊
This was a wonderful tutorial! Thank you so much, Jan.
Some nice tricks. Thanks!
Thank you so much for sharing!
I love your work! Thanks for sharing🤓
So beautiful thank you for shering yur Video.
Just 😍 beautiful
Ok, thanks for your recommendation
👏🏻👏🏻👏🏻¡Fantastic, ty very much!👏🏻👏🏻👏🏻
This is an amazing video . Can you show a video on how to make enamel pins like a clover or anything ?
A great video.....thank you
Great video! very fun to watch :-)
정말멋지네요
Don't waste your time annealing it when you sand the piece down...its not work hardened that way...only thru rolling, hammering, stretching and forming like bending, twisting...but sanding and grinding does not aneal the piece...it removes material❤🎉
Thank you for these wonderful videos. I really appreciate your expertise and your easy step by step instructions.. I am a silversmith and I have never done enameling. I am looking forward to trying transparent enameling on textured pieces. I would like to know if it’s possible to enamel a piece that has a bezel for a stone within the enameled piece? What process and how to keep the enamel off of the bezel. Would the wet enamel process work best?
Hello, thank you for watching. Yes, wet packing would be the best process for a bezel. You can watch how this is done 20 minutes into our video here: ua-cam.com/video/O0oz5rJ5Zdc/v-deo.htmlsi=QmsvEGZue_tsFjT6
Thank you for the quick and great response
Always happy to help! @@gmmcmillan
Great video, thank you. Question-is the fiberglass brush used for burnishing a personal choice or does it work better than a brass brush in some way?
Hi Jenn, the fiberglass brush is more of a personal choice over the brass brush. Have a good day!
What guage silver is Jan using please x
How do you fire it? Eudice Germaine
I'm behind here however glad I found you. I do have a question on what is being used to spray between the dry enamel layers?
Hi Suzanne, this is the Spra-tool. You can find it here: www.cooltools.us/ProductDetails.asp?ProductCode=ACC-217
If you are interested in all the products used in this video, you can find a list of all the products below the video here: www.cooltools.us/Video-Enameling-Techniques-Tube-Riveting-s/2596.htm
Hope this helps, thank you for watching!
What gauge fine silver tubing do you use?
The wall thickness is .51mm. You can find the tubing she uses here: cooltools.us/collections/enameling-techniques-tube-riveting-by-jan-harrell-1/products/999-fine-silver-seamless-tubing-soft
For all the products used, you can find them under the video here: cooltools.us/collections/enameling-techniques-tube-riveting-by-jan-harrell-1
Thanks for watching!
Can you tell me what template to buy for this shape please. Live your videos
Hello, this is the fat shields template. You can find it here: www.cooltools.us/Jewelry-Shape-Template-Fat-Shields-p/tmp-453.htm
Please feel free to reach out if you need anything else, we're always happy to help!
Just need 10,000 in tools and supplys and you too can make jewelry
What enamels brands are you using?
These are Thompson Enamels. You can find them here: cooltools.us/collections/thompson-enamels
Hope this helps!
Can you please tell me the name of the gadget you used to cut the tubing. I love your videos big thank you. Kathy
Hi Kathy, the tube cutting holder Jan uses can be found here: www.cooltools.us/Tube-Cutting-Holder-p/hol-117.htm
If you are interested in any other products that Jan uses in this video you can find the complete list and links below the video here: www.cooltools.us/Video-Enameling-Techniques-Tube-Riveting-s/2596.htm
Have a good day!
Can you tell me what the thickness of the silver sheet is that you are using?
Hello, this is 20 gauge. You can find it here: www.cooltools.us/Textured-Metal-Richter-Scale-Fine-Silver-p/txm-817-p.htm
Thanks for watching!
what do you use as a surfractant here?
Hi, you can find the Surfactant Jan uses in this vide here: www.cooltools.us/Surfactant-Metal-Prep-for-Enameling-2-oz-p/enl-016.htm
Thanks for watching!
How do you make the dual enameled pendant with a design on the back?
Hi Marcia, can you tell us which pendant you are wondering about?
Jan Harrell’s enameling and riveting
@@marciaeveritt7958 Her enameling and riveting technique is shown in this video.
CoolToolsVideos she talks about putting a design in the counter enamel, so it looks good on both sides. Doesn’t explain how to do it.
@@marciaeveritt7958 Thank you for clarifying. You can also use design stencils or Sunshine Enamels to paint a design on for the back. This would be our recommendation, unfortunately Jan does not have a video specifically showing what she does to the back.
Can this be done on metal clays
Yes, once the metal clay is fired. Have a good day!
I Wanth to take a class we you wher is you estudió in Houston
Hi Mami, you can find more about available classes on Jan's website: www.janharrell.com/
Have a good day!
I am not familiar with this and I am not a jewellery maker. If you put a list of materials will be helpful. And please don’t avoid steps because is confused. Your classes are very good but not for beginners like me. Thanks to share 😊
Hello, you can find all of the materials used in this video, below the video here: cooltools.us/collections/enameling-techniques-tube-riveting-by-jan-harrell-1
Thanks for watching!
A wooden ring holder would be better then those pliers and wouldn’t mark your work!