Nick, awesome video as usual. I don't ever comment on videos but I gotta say keep up the great work, such a joy to get home after a long day of work and see one of your videos in my feed. Your music, the B-Roll, all of it is such high quality. You can definitely tell you put some serious time into your videos. I am excited to see where your channel goes in the future!
Such a clean build during an age of RGB madness. I just had a little tear of joy well up in my left eye. I'm not crying inside, it must be raining outside. Your work is poetic.
they did a superb job, i realy like the design, and most importantly, it has great airflow, wich for me was a no go for the likes of h500. I really like te understated design along with that mesh. Droping the coolermaster in the logo was a great choice too, even though i didnt mind it in the first place, but it goes well with the clean looks of this case. Congrats to coolermaster, this is going to be my next case for sure.
love it, love it , love it. another awesome build I really like that case and im a huge fan of the mesh in the front of the case. great video as always.
The front-facing fans, is it best to place those inside the chassis or just inside that front filter? I've got the same case, but I just put brand new Noctua fans in and I feel like it's much better looking to have them inside the chassis, however I'm concerned that the push or pull of the air is possibly better with the outside the chassis but just inside that front filter?
Are you still using this set up? Do you think the corsair spec-05 is a good alternate? I would have one 2.5"ssd/two 3.5"hdd/two 2.5" hdd total, thats why im looking at this case, seems to have lots of bays. I would only be using a 160mm psu. if im not using a water cooled radiator, do i need fans at the top or just front and rear? good video.
Great build video, the look of this case is spot. Thanks for the warning for the power supply length, I also got 180cm long power supply but i have to get it
If you get some time check out todays vid. It's the teardown of this system. Some final thoughts about the case when it comes to cleaning etc as well :) Thanks for watching.
Can the hard drive cage be removed by drilling out the rivets attaching it to the case? With all the other ways to mount SSD's and HDD's in this case - the cage is a mute point to have it in there.
I think they made a slight update to the case. I got mine back in December and the right side of the cage (side closest to the psu) is held in by 4 screws and is now removable. There was one hiccup I had though, one of the screws on mine in particular would not come out even though it could twist. I think I could probably get it out eventually with some tools but for now that side acts like more of a mini door in the PSU shroud lol
Hey man i have a question, does the case have preinstalled standoffs ? I have installed my motherboard on it without putting any and im not sure if there already were standoffs preinstalled, an answer to this would really help me, thanks.
Very clean build. Well done! I'm thinking of buying this case, do I need to buy any extra stuff to correctly install my HDDs. Does the case come with anything to mount the HDDs? Thx in advance!
Love the design of the case right down to the NR200 but I really wish that a) there was less empty space towards the front of the ATX version and b) the ODD less NR200 came to North America.
Hi, was wondering how was the experience installing the PSU? I was also opted to switch cases to a smaller one for a more minimalistic design. My PSU is an older Corsair RM850x, which has a 180mm length, an it seems your HX850i has the same length as mine. It seems you also used the sleeved cables, from what I can understand that reduces some bulk for clearance, how would you say it would work on the stock cables?
@@GearSeekers Thanks for the reply. How much clearance was there when you installed the PSU to the HDD cage? Was wondering, maybe I can still fit it, since my case right now is pretty small as it is, and it's distance to the HDD cage isn't much either, but it's orientation is at the front. Do you mind measuring it with a ruler or something? Thanks again.
Dear Nick please do a review of the new ASUS VG series gaming monitors with IPS panel and G sync compatibility. I have seen the 27 inch one on Asus website but no 24 or 25 inch, if they are there please let me know. Waiting for that great review.
@@GearSeekers Currently my case is Fractal Define Nano S, and I want to upgrade to mid tower case but I don't have enough budget to buy a new ATX board now.
I haven't had a good experience with any of the coolermaster gear i've gotten lately. Genuinely really disappointed. Especially the MB530P, all their new ARGB/RGB fans. The fans are noisy crap with iffy lighting, and the case - while beautiful, has pretty terrible temps and negative pressure due to the intake choke. Lesson learned, got a Fractal Define Meshify to replace the MB503P and HUGE difference. I do like that new NR600 aesthetic, but, once burnt twice shy with current CM cases. Especially since the filtering isn't great on the front intake.
Holy moly Nick I wasn't aware of the potbelly you're sporting mate. You should do something about it. That's asking for a massive coronary but you should wait a few decades with that. Regardless nice work with this build.
Wow that is the rudest comment I've seen. You don't know me. I exercise 4-5 times a week for 3hrs+ Sitting for the rest of the day and working in IT for 15+ years doesn't help but seriously? When you get to your Mid 30's lets see how easy it is to keep the weight off when you work 16hr days. This is not a topic for debate. Grow up.
Wow in what world did you think commenting that was okay? Someone your age should surely have more manners and common sense than that. Did you think trying to shame someone about their weight actually going to motivate them? What a disgusting comment.
Nick, awesome video as usual. I don't ever comment on videos but I gotta say keep up the great work, such a joy to get home after a long day of work and see one of your videos in my feed. Your music, the B-Roll, all of it is such high quality. You can definitely tell you put some serious time into your videos. I am excited to see where your channel goes in the future!
Thank you so much! I really appreciate your very kind words! It means a lot!
That's such a lovely comment Logan! Thank you!
Question what cooler master fans he used on the front
the nr600 is a minimalistic case and that's why i like it
The production quality on the top ⬆️
PERFECT CASE
PERFECT VIDEO
PERFECT LIGHT
PERFECT SOUND
Form thailand
Quite possibly one of the most beautiful builds on UA-cam. Nice work my man
daaamn hos does dis guy not have millions of subs!! Great vid man!
Just bought an NR600 for my first build
Such a clean build during an age of RGB madness. I just had a little tear of joy well up in my left eye.
I'm not crying inside, it must be raining outside. Your work is poetic.
The NR600 looks like a pretty decent case. Airflow should be great. Great video once again 👍
all rounder definitely.
Badass soundtrack man, had my damn desk shaking, lol. Great job, looks are amazing and the music is sic.
Hahahaha!
@@GearSeekers Yep, good work for the eyes and the ears ! Could you share the playlist of the video please ?
video skill+music top notch
Woo, new case and it awesome. Good Job Cooler Master, if you read this Cooler Master, please make a white version haha. Great video fams
Some of the best build videos online keep at it man awesome job
they did a superb job, i realy like the design, and most importantly, it has great airflow, wich for me was a no go for the likes of h500. I really like te understated design along with that mesh. Droping the coolermaster in the logo was a great choice too, even though i didnt mind it in the first place, but it goes well with the clean looks of this case. Congrats to coolermaster, this is going to be my next case for sure.
Amazing looking build, nice work man!
Thanks so much!
love it, love it , love it. another awesome build I really like that case and im a huge fan of the mesh in the front of the case. great video as always.
Thanks so much!
glad I came across this the icing on the cake , most definitely going with this case and rgb fans . Build otw 😎👌
I really love your pc's!!! Greetings from Mexico Nick you are amazing!!!
Thanks so much!
Great video👍😀
In simple....i simply love this build ♥
awwwwesome video nick ♥☺♥
Can i use 120mm psu without problems?
It is always more pleasant to disassemble the computer than to collect))) Although I do the opposite on my channel))
If those top fans are exhausting, you should take off the filter. Why filter out exhaust air?
you never fail to amaze me
are these long screws adding to install three front fans?
The front-facing fans, is it best to place those inside the chassis or just inside that front filter? I've got the same case, but I just put brand new Noctua fans in and I feel like it's much better looking to have them inside the chassis, however I'm concerned that the push or pull of the air is possibly better with the outside the chassis but just inside that front filter?
You seem to be the king of b-roll
Are you still using this set up? Do you think the corsair spec-05 is a good alternate? I would have one 2.5"ssd/two 3.5"hdd/two 2.5" hdd total, thats why im looking at this case, seems to have lots of bays. I would only be using a 160mm psu. if im not using a water cooled radiator, do i need fans at the top or just front and rear? good video.
Great build video, the look of this case is spot. Thanks for the warning for the power supply length, I also got 180cm long power supply but i have to get it
If you get some time check out todays vid. It's the teardown of this system. Some final thoughts about the case when it comes to cleaning etc as well :) Thanks for watching.
Forgot to reply, thanks I enjoyed that video as well
Cool! I want to ask your are you using SATA cable and power cable to connect HDD? I have unknown for that issue. Wait your response.
Are the GIM kb-23 case fans good?
whats the difference between the nr600 with and without the odd?
Can you change the TG side panel with a steel panel if you dont like TG?
Can I ask if this is compatible for vertical gpu mounting?
Can the hard drive cage be removed by drilling out the rivets attaching it to the case? With all the other ways to mount SSD's and HDD's in this case - the cage is a mute point to have it in there.
I think they made a slight update to the case. I got mine back in December and the right side of the cage (side closest to the psu) is held in by 4 screws and is now removable. There was one hiccup I had though, one of the screws on mine in particular would not come out even though it could twist. I think I could probably get it out eventually with some tools but for now that side acts like more of a mini door in the PSU shroud lol
Hey man i have a question, does the case have preinstalled standoffs ? I have installed my motherboard on it without putting any and im not sure if there already were standoffs preinstalled, an answer to this would really help me, thanks.
Wow, you are lazy
Nice ambience~
Very clean build. Well done! I'm thinking of buying this case, do I need to buy any extra stuff to correctly install my HDDs. Does the case come with anything to mount the HDDs? Thx in advance!
Does this case really support 4 HDDs in total, cause I'm really surprise about the specs on their website???
where do you the hard drive in this case?
Probably won’t see this but could you have went tubes down for the aio?
Why?
I bought the Coolermaster SF360 ARGB all in one. Can I install it in the front but still add fans in the front to do a push pull config?
Love the design of the case right down to the NR200 but I really wish that a) there was less empty space towards the front of the ATX version and b) the ODD less NR200 came to North America.
Could this case support a 360mm aio in the front, and the strix 240mm aio with the lc oc 6800xt
Yes
are all of those fans necessary if i want good airflow in this case?
No, 2 on the front, 1 on the back and 1 at the top
this video was perfect
I have this case but cant fit all my psu cables in it, how did u fit them in there? Theres no room for my hands
Hi, was wondering how was the experience installing the PSU? I was also opted to switch cases to a smaller one for a more minimalistic design. My PSU is an older Corsair RM850x, which has a 180mm length, an it seems your HX850i has the same length as mine. It seems you also used the sleeved cables, from what I can understand that reduces some bulk for clearance, how would you say it would work on the stock cables?
Probably not. The stock cables are a lot thicker and harder to bend
@@GearSeekers Thanks for the reply. How much clearance was there when you installed the PSU to the HDD cage? Was wondering, maybe I can still fit it, since my case right now is pretty small as it is, and it's distance to the HDD cage isn't much either, but it's orientation is at the front. Do you mind measuring it with a ruler or something? Thanks again.
Do you raid your Samsung m.2 drives? Does it help performance wise during editing?
Not in RAID and no it won't help
Please make full building review. How to install the PSU because some videos have installing psu issues
There are lots of videos out there already.
Hi, will i be able to installa 240 aio on top? I mean will the ram stick obstruct it? Mobo is Msi b450 Tomahawk max
I have this question also, mine was wondering if i can run a 360mm aio in the front and the strix 6800xt lc oc version, with its 240mm aio on top
Yes
Dear Nick please do a review of the new ASUS VG series gaming monitors with IPS panel and G sync compatibility. I have seen the 27 inch one on Asus website but no 24 or 25 inch, if they are there please let me know. Waiting for that great review.
7:23 whats the name of the song?
we make all the music
grsk.co/patreon
My next Case
Does this case come with rgb fans
no
is the tempered glass clear or blackened?
Im pretty sure clear
Hey, can I mount a Mini ITX motherboard in Cooler Master NR600?
yes. not sure why you would want to though
@@GearSeekers Currently my case is Fractal Define Nano S, and I want to upgrade to mid tower case but I don't have enough budget to buy a new ATX board now.
@@GearSeekers Thank you, I think I will buy this case.
Ooh very nice! I hope cyberpower will get this case in stock before I get to choose my new PC for 4k gaming. 😁
the fact that you want to buy from cyber power and you want to game on 4k is sad.
Can this fit like a deepcool 360ex aio at the front?
Yes
is that triple 120mm fan at the front? help
Yes
Thermaltake Inspired Cooler Master with this one
Where can we hear that song, link is not working
We make the music.
grsk.co/patreon
I haven't had a good experience with any of the coolermaster gear i've gotten lately. Genuinely really disappointed. Especially the MB530P, all their new ARGB/RGB fans. The fans are noisy crap with iffy lighting, and the case - while beautiful, has pretty terrible temps and negative pressure due to the intake choke. Lesson learned, got a Fractal Define Meshify to replace the MB503P and HUGE difference. I do like that new NR600 aesthetic, but, once burnt twice shy with current CM cases. Especially since the filtering isn't great on the front intake.
I have the same gtx 1080
Why does the case cost 208$ ? 💀
It doesn't
Quite a lot of b roll
That's what we do
I ll buy it in the German version for my 560€ pc
Holy moly Nick I wasn't aware of the potbelly you're sporting mate. You should do something about it. That's asking for a massive coronary but you should wait a few decades with that. Regardless nice work with this build.
Wow that is the rudest comment I've seen. You don't know me. I exercise 4-5 times a week for 3hrs+
Sitting for the rest of the day and working in IT for 15+ years doesn't help but seriously? When you get to your Mid 30's lets see how easy it is to keep the weight off when you work 16hr days.
This is not a topic for debate. Grow up.
@@GearSeekers Sorry I didn't mean to be rude. My apologies guys.
Wow in what world did you think commenting that was okay? Someone your age should surely have more manners and common sense than that.
Did you think trying to shame someone about their weight actually going to motivate them?
What a disgusting comment.
Just think about walking up to someone you've never met on the street and saying "Hey you look fat. You're gonna have a heart attack and die"
Some people just don't know what's appropriate to say and what's not. I'd blame parenting, but he should know better by now.
3RD
first
I wanna be first
2st.
😂