Hi Chris, I've been researching this pressure washer and the entire unit is made by Briggs for Husqvarna. So - that little bottle holder and cap is designed for the Briggs & Stratton Wash Concentrate, 32-Ounce. Why Husqvarna didn't include that info in the box or operator's manual is weird.
I just bought this from Costco. To your comment about the oil in the video, I've had a Husqvarna lawn mower that I bought new 6 years ago, put oil in it once and I don't even check the oil and the thing has run like a champ this entire time and through fairly good use these past 6 years (mowing my extremely large lawn at least once a week for about 8 months out of the year). Only thing that failed was the FWD electric motor but it doesn't phase me. The engine and blade have been rock solid. No issues. I haven't even had the blade sharpened and it still cuts like the day it was new. So, I do think their "gimmick" of just check the oil and add as necessary, is justified. Great video though. Thanks!
Thank you, Chris! Finally got mine assembled this afternoon. Glad to watch your review and could avoid some bummer later. I'm gonna get the Briggs and Stratton bottle as some has suggested.
I bought one of these pressure washer from Costco and I’ve read the owner’s manual. In the maintenance section they said that the oil has to be changed once a year. About the fuel, the only gas whit out ethanol is the premium gas from Costco. I’m delivering fuel myself in Toronto area in Canada, I have loads of experience in this, so you can trust me on this
I just bought mine today and the owners manual does say to change the oil. The problem is that you have to run it dry WITH a water hose attached to the pump and water turned on. Then you have to take the dip stick out and tilt the machine in the opposite direction of the spark plug and drain the oil out of the dipstick tube, (really?). And about the bottle not being included is stated in the owner's manual. Mine also surges but it's a Briggs and Stratton engine made with foriegn parts.
I'm returning mine. The gun has no way to lock the trigger in the "on" position, which, if you're doing any job that takes longer than a few minutes, is a pain. It also locks in the "off" position every time you let off the trigger, so you have to slide the release button every single time...not so easy with one hand (for me), and just seemed unnecessary and annoying. If you're doing little jobs that take less than 30 minutes, it's probably fine. It seems powerful enough for most residential stuff. If you're looking at a long driveway or a lot of wood fencing or decks or whole house washing or paint prep, save up and go for something with a bigger gas tank, trigger lock option, an actual oil drain plug, a fuel shut-off valve and a better carb. Just my opinion.
I don't recommend anyone doing this because you are defeating the safety built into the pressure washer trigger but I myself just use a rope rapped around the trigger with a very easy way to get the rope off with just one quick pull of the rope. I do this when I'm doing our complete roof pressure washing which takes hours to do. But it is UNSAFE to do it this way for sure.
Dude, this is an awesome review! Just what I was looking for! Gonna get that shut off valve (was thumbing it today at Lowes, $8) -- easy install. Bottle issue is a pain, but easy fix (still scratching head over omission tho?); Have used B&S for many years (lawn mowers) with few issues (learn to disassemble/clean carb tho) -- but they are work horses; Great comment on functional obsolescence... very good point -- and we work around/with that with proper maintenance (and considering purchase price). Re- purchase price: I got ripped off at Costco (buyer beware!) having paid $350 last week! :-( Re- no pressure at first firing: dis/re-connect hose, bleed air/water (repeat as necessary), then fire up...worked for me. Re- hose breaking (not in this review)... concerned about this, but wondering if (for those i've read) they shot hard into the hose with the red spray tip?... I almost did, very strong etc. Anyway, thanks again.. very good. My intent is to limp this along for years. (but will return to Costo if it's a lemon...Costco is good in this way!) Cheers.
I bought one of these machines a year ago. I used it a little bit, and then winter came. I started to use it now, and it worked a few hours, and now it won't start; that's why I am searching information now.
Torn between this Husqvarna from Costco or picking up the Ryobi 3000 PSI/2.3 GPM with the Honda motor from Home Depot. Which would you recommend between the two based off your impressions of the Husqvarna?
Both are good. Just don't buy Briggs and Stratton false advertisement that you don't ever have to change the oil. If you look deep into the owners manual it'll tell you how to change the oil. If it was completely unessasary they would tell you how to change it lol. Change the oil and both will be good. My dad has the Ryobi with the Honda. And I have this one from Costco. They both are very acceptable and similar performance. The one thing I like about the Ryobi is you can regulate the pressure while you can't with this.
Hey I’ve had it for 4 years and today it dose not crank, I left gas in the tank for month or so but I always had gas and no problem past years. What would you recommend.
UPDATE:1 year and still cranks within the first 2-3 pulls. Probably will buy another when this one finally does bite the dust ua-cam.com/users/postUgkx43QMbQqu67IZadu9ou8Sg1BdrunMRNqX . No issues at all. Very happy with it.UPDATE: After 6 months of use and over 70 uses I would still highly recommend this pressure washer. It does vibrate a decent amount but never had it “walk” like others have mentioned. No oil leaks, still seems to run like the day I bought it. Still cranks within 2-3 pulls every time. Very happy with my purchase!Have used it about a dozen times now. Plenty of power, cranks up on 1-2 pulls every time. My only complaint would be I wish it was a little taller to make it easier to walk with it (hits my ankles a lot) and that the two hose connections were a little further apart but it hasn’t caused me any issues. Seems to run a good 1-1/2-2 hrs on a full tank, overall a well built machine and definitely worth the money in my opinion.
Hey I’ve had it for 4 years and today it dose not crank, I left gas in the tank for month or so but I always had gas and no problem past years. What would you recommend.
None of the manufacturers in this price range include the bottle. You can buy cleaner branded B&S or craftsman and then refill from the gallon jug. The warranty is pretty standard, if you are going to have manufacturing problems they usually occur 8n first 90 days
Just brought one from Costco and the bag of oil had a hole so was leaking in box. On my 2nd use of pressure washer oil started leaking. The air filter was soaked with oil. Have no idea how this happened. Of course it’s the weekend and no customer service. Not to mention I have oil on my backyard pavers. How frustrating
I thought it was working pretty good the first time I used it to clean front door walkway and driveway. The second time I brought it out to the side of the house to clean some siding. As I pulled it out and made a couple of turns on the grass, the left wheel cracked and now the powerwasher has a broken wheel and the whole thing is tilted. So it’s seems to be easily dragged on concrete asphalt surfaces but very hard to maneuver on an inch thick lawn. Wish it would turn and change direction like my lawnmower which I’ve used the same one for over 15 yrs without wheels falling off like this brand new husqvarna powerwasher. Will be returning this one today. Even though it’s still under warranty, a replacement wheel will be a recurring broken item. Now I realize there are way too many cheap parts on the model (plastic carburetor, plastic gas tank, cheap light plastic wheels.)
You are so right, all of these newer power equipment like Lawn Mowers and Pressure Washers are built so cheaply compared to the older ones. It's like the peak of durability and quality power equipment was the Mid-2000's... Now they are built with so many plastic parts. I've been lucky with mines, but I am very skeptical on the durability of this. An other example is the newer Craftsman Lawnmowers... they are made of mainly plastic parts compared to the ones Sears used to sell back in the day made of mostly metal. They are still good quality power equipment out there, but at a higher cost.
The axial pump blew on me after about 20 uses, I have used many pressure washers before and I take good care of my stuff. Never leave them running when I'm not using them, I noticed before I'd start up after about the 5th time I used it there was air coming out of the gun with the water when I was trying to bleed the air out of the lines before I started it. A week ago on the first pressure washer job of the season the unloader valve blew off leaving a Little hole in the pump. I tried to braze it last night but I don't think it's gonna hold, looking st a new pump after 2 years lol, I have a 15 year old Simpson water shotgun with the same general pump on it
Thanks for the review! I just bought this PW today because my previous Yamaha PW took a crap on me. Thank goodness for Costco. And I figure the sweet orange frame must be the "Husqvarna" product. LOL
Thank you for posting this video, I just got mine yesterday, what happens if I start the engine without the water hose connected to it, will it destroy the pump?
I bought and just set up a Model PW3200 from Costco. It ran for 2 minutes and shut off. Has done that 3 or 4 times. Oil level full, not out of gas. Starts after a minute but stops again after 30 - 45 seconds. Water hose connected and seems to work well for the time it runs but keeps dying. Any suggestions.
Most likely your carburetor got gummed up with something. It possible that it had some small debris from the factory and got logged in after running for a short time. Another issue could be a faulty thermostat that dosnt automatically open the carburetor when it gets hot causing it to run for a little bit when it's cold, but shut down when it's hot. Either way, Return it back to Costco. This must be a faulty unit from the manufacturer.
We purchased one of these in the Spring. Used it a handful of times but has been sitting unused for three months with gas inside. Now it won't start and thanks to your video, now we know why. Is there anything that can be done at this point or have we ruined it? Thanks!
@@Mr-Chris Yes! Thank you! And now I will install a fuel valve and track down the pump saver. Lesson learned! Thanks for posting this video and replying to my comment.
I just replied to Mia and Kai. But if anyone has info or solution to getting the brass ring to lock on the spray nozzle, I would so appreciate it!??? I am guessing this wand is defective. I lubed it but just can't get it to lock on the spray nozzle. Also... anyone else find the trigger lock annoying to depress in order to pull the trigger? I am really considering returning this thing to Costco!!!!
I have this model and the first time I used I shot out a o ring for the nose tip and the then the nose tip shot out too but don’t know where to get one?
Most hardware stores like Home Depot and Lowes sell "standard" generic pressure washer tips and o ring that should fit this. This pressure washer uses standard fittings.
Thanks for the thorough review! I ordered this the other day from Costco, when it was on sale for $299.99. I was wondering if you know how long the 0.3 gallon tank of gas will run for before having to fill up again. My driveway is about 800 sq. ft. and 0.3 gallons doesn't seem like it will be enough without having to refill. Thanks!
After using this a few more times, I can say that this is a bit of a gas hog, I find myself having to have a gascan on standby and fill up as needed. It's a powerful machine, but burns through gas.
Great videos on the Husqvarna Chris, I watched them both. I am getting ready to buy one. Costco is having a sale on them but it looks like they upgraded the motor. Looks like yours is using the 875EXi 190cc but this year its using the CR950 208cc. How is your pressure washer holding up? Update so I purchased it and was a little bummed on a few things. 1st it looks like it is now made in China or at least that is what the box says. It also says the engine was designed in the US but assembled in China. It only comes with 1 tip that is a 7-in-1 nozzle not sure how I feel about this. Still a great price though.
For safety reasons, the manufactures typically don't make the ability to lock the trigger on... at least with the several pressure washers I have personally used I never seen that.
If your water and pressure hose are connected to the pressure washer... Try to pull the trigger while starting it. If that doesn't work, Return to Costco, it's possible that your engine is seized.
I just tried to use this machine and have the same problem!!?? The problem is that I can't get the brass connector ring to pull up and lock the nozzle on. I have lubed it and still can't get it to lock the nozzle on the spray wand tip. I need to use this thing for a job I have to do, so if anyone has a solution, that would be great! Could this be a defect? I don't want to force it and shouldn't have to. Thanks for any help.
Guess what?! Your prediction that this pressure washer would fail after 4 uses… I let the gas stay in it for 8 months and now she won’t start… when I take it in for service I’m getting a shut off valve on installed.
is it normal for it the motor to surge up an down at idle? Mine surges when not using the hose but as soon as you start using high pressure water it revs up and stays consistent. I assume the surging has something to do with the water pump?
No it's not normal for it to surge at idle. I have another pressure washer that surged before and it turned out to be a clogging carburetor jet. This is a new pressure washer so it shouldn't be surging.
@@Mr-Chris Hey Chris. I just posted on this chain regarding getting a spray nozzle to lock on? Hope you can help? It seems the brass ring just won't go higher up to lock the nozzle on? water sprays all around the edge of the nozzle. Also... my machine seems to surge too, before I depress the trigger? Could that be from not completely fresh gas? Its several months old. I though would be ok. Main issue is the spray nozzle not locking on??? Thanks for any advice?
Mine surged and I returned it for another one that one surged too only when idling after letting pressure build so I just ignored it. This year I swapped the pressure hose for a Dewalt and installed quick connects also swapped the gun for a Dewalt one and no more surging... kinda weird but it works way better with the new hose.
I just set my Costco 3100 up and see in the manual not to use a water hose longer than 50 feet. Is this right? I was planning on using the 100 on my hose reel, if this is true, I will have to go and buy a 50, just for the washer. Not happy with that, plus the absent soap bottle that so many have noted, which is just plain dumb on Husqvarna's part.
I was just researching this, and from what I've read, there may be slight pressure loss with a hose longer than 50 feet. But, as long as your house is putting out 3gpm at the source, the pressure loss is minimal, about 50 psi on a 100 foot hose.
This pressure washer is close to having just a hose for pressure intensity. I felt the scouring was too weak when it could not shear off weeds in the driveway. So with the yellow tip on (manual says it is 15 degrees and 2800 psi) I carefully put my hand into the stream about eight inches from the end of the wand. It was soft and full spray, but not a cleaning tool for stone or anything else. I was replacing an old Husky 1650 Electric pressure washer whose wand cannot be repaired anymore. The Husky had more power. Hard to believe, but true. I wanted this to be a good machine but it has NOT got the power to do the hard work it is made for. Another trip back to Costco. Is it me or do other people think Costco equipment is like Harbor Freight? PS this thing drinks gas.
Wow, I actually have their previous Yamaha generation pressure washer that Costco sold and I feel the engine is better quality. As far as the pressure... I'm not sure but maybe you've might have a defective product. Comparing this pressure washer to my sun Joe electric washer... this thing is more powerful. I've actually chipped some concrete at 15 degrees. But I am disappointed with the engine on this. As for Harbor Freight, believe it or not their pressure washers are higher quality than this but much more expensive. I've been eyeing the predator 3100 for a few e.
Good video. I have a question for you and hopefully you can help me out with my pressure washer issue. It won't turn on but when I put a little bit of Carb/Choke cleaner, it works but only for a few seconds (Husqvarna 3100). Thanks a lot in advance sir!
I’m looking at this pressure washer Vs the ryobi 3,300 psi 2.3 GPM pressure washer. And after your review I’m leaning towards the ryobi. This will be my very first pressure washer and after watching a few reviews I think I like the “ idol down technology” on the ryobi. Endless there are any other suggestions you or others might have. I’m looking to spend hopefully under $400.
The Ryobi 3300 is the better choice. Especially if it has the Honda engine in it. If you can get that pressure washer less than $400 go for it. However I believe they retail for like $450.
Owned mine for a year and use it once sometimes twice a week to wash the front of the house and sometimes the cars . Noticed that it started to blow white smoke every now and then
I’m in my second year of owning it still going good. I did change the gun and hose to a Dewalt 4500psi setup and it got rid of surging for some reason. Also switch over to quick connections not a terrible power washer.
I have owned this machine for five months. Until yesterday it started and ran perfectly. I ran it dry yesterday and after refueling it ran about ten minutes and quit. The new fuel was about two months old but had Sta bil added. I drained the tank and put new fuel in. It started and ran about 5 minutes and quit and has refused to run since. I have cleaned the air filter and let it set overnight. Now, if I pull the engine thru with the switch in the off position 5 or 6 times then, turning the switch to the run position it will start and run about 5-10 seconds. Has anyone had this problem or have any idea on how to fix it.
It sounds like your carburetor is gunked up. If you're mechanically inclined you can easily remove it give it a clean and put it back. I've actually worked on this carburetor already just to Tinker around and it's easier than the metal ones
@@rodharder5736 did you figure out what was wrong? Mine is doing the exact same thing you described. It runs for 2 or 3 seconds then stops. If so, how did you fix it. Thanks for any info you can provide.
I love buying at Costco but this is not a good deal for the price. I worked in a Lawnmower dealer for a couple years and those engines are not the customer favs. Actually, this deal is equivalent to buy at Sears the Craftsman trade line. I rather would get a Honda or Kawasaki engine. My friend is a 2 & 4 mechanic and he says to this, "no way Jose". I don't mean Briggs&Straton is a bad brand only on small models.
Good insight. What do you think tends to go bad with these newer B&G engines? I've only had honda and Yamaha engines recently. Most of my research says that these carburetors gunk up easy.
this is a residential power washer. If you're looking to power wash your home... this is a great power washer. However if you're looking a power wash many homes for business ... you should look into a commercial power washer
@@XORGNMN this won't last long if using it for a business, the pumps on these are not meant to last. For Commercial, at a minimum go with Simpson pressure washer with a Honda engine.
I used to work at a body shop. Please don't ever pressure wash your cars no matter who tells you you can. If you have a chip in your paint the pressure from the water can go under the paint and pull up the paint and rust your car. I've seen it happen many times. Just hand wash it with garden hose pressure is the best way.
Looks to me that they went as cheap as possible ( greed ). Never change oil smh , no fuel filter, no gas shut off , plastic carb , no bottle NO thank you
If you use full synthetic you will not need to change the oil. Ever. Promise. Secondly, DUDE what is UP with the bottle holder? No bottle? What kind of bottle? Where do you get this bottle? I have the answer: www.amazon.com/dp/B013BM8CKI/ref=twister_B07NQVY786?_encoding=UTF8&psc=1
Here is a video link for the fuel to use in your Husqvarna PW. This video compliments what Chris mentioned regarding fuel. Thanks for the info, Chris! ua-cam.com/video/nX6CFlQbUXI/v-deo.html
No yo no tengo un video en español para este máquina. Pero te puedo decir que es una buena máquina, y hay que tener cuidado dejando gasolina adentro para mucho tiempo. Como la carburador está hecho de plástico la gasolina se puede coagular.
This is a complete piece of garbage. Used it once and it will not restart. Emptying the fuel every time you use it is ridiculous. Total waste of money, taking it back tomorrow.
bruh, that bottle holder is for beers
that is what I was using it for...
Hi Chris, I've been researching this pressure washer and the entire unit is made by Briggs for Husqvarna. So - that little bottle holder and cap is designed for the Briggs & Stratton Wash Concentrate, 32-Ounce. Why Husqvarna didn't include that info in the box or operator's manual is weird.
I just bought this from Costco. To your comment about the oil in the video, I've had a Husqvarna lawn mower that I bought new 6 years ago, put oil in it once and I don't even check the oil and the thing has run like a champ this entire time and through fairly good use these past 6 years (mowing my extremely large lawn at least once a week for about 8 months out of the year). Only thing that failed was the FWD electric motor but it doesn't phase me. The engine and blade have been rock solid. No issues. I haven't even had the blade sharpened and it still cuts like the day it was new. So, I do think their "gimmick" of just check the oil and add as necessary, is justified. Great video though. Thanks!
Whenever the mower fails, just know that it could have lasted longer if you changed the oil
Thank you, Chris! Finally got mine assembled this afternoon. Glad to watch your review and could avoid some bummer later. I'm gonna get the Briggs and Stratton bottle as some has suggested.
I bought one of these pressure washer from Costco and I’ve read the owner’s manual. In the maintenance section they said that the oil has to be changed once a year. About the fuel, the only gas whit out ethanol is the premium gas from Costco. I’m delivering fuel myself in Toronto area in Canada, I have loads of experience in this, so you can trust me on this
I just bought mine today and the owners manual does say to change the oil. The problem is that you have to run it dry WITH a water hose attached to the pump and water turned on. Then you have to take the dip stick out and tilt the machine in the opposite direction of the spark plug and drain the oil out of the dipstick tube, (really?). And about the bottle not being included is stated in the owner's manual. Mine also surges but it's a Briggs and Stratton engine made with foriegn parts.
my manual shows the bottle in what is included... but it's not there. The plastic tubing and cap are there but no bottle. Ridiculous.
Just returned to Costco. Husky never called me back to troubleshoot!! Terrible business
I'm returning mine. The gun has no way to lock the trigger in the "on" position, which, if you're doing any job that takes longer than a few minutes, is a pain. It also locks in the "off" position every time you let off the trigger, so you have to slide the release button every single time...not so easy with one hand (for me), and just seemed unnecessary and annoying. If you're doing little jobs that take less than 30 minutes, it's probably fine. It seems powerful enough for most residential stuff. If you're looking at a long driveway or a lot of wood fencing or decks or whole house washing or paint prep, save up and go for something with a bigger gas tank, trigger lock option, an actual oil drain plug, a fuel shut-off valve and a better carb. Just my opinion.
I don't recommend anyone doing this because you are defeating the safety built into the pressure washer trigger but I myself just use a rope rapped around the trigger with a very easy way to get the rope off with just one quick pull of the rope. I do this when I'm doing our complete roof pressure washing which takes hours to do. But it is UNSAFE to do it this way for sure.
Dude, this is an awesome review! Just what I was looking for! Gonna get that shut off valve (was thumbing it today at Lowes, $8) -- easy install. Bottle issue is a pain, but easy fix (still scratching head over omission tho?); Have used B&S for many years (lawn mowers) with few issues (learn to disassemble/clean carb tho) -- but they are work horses; Great comment on functional obsolescence... very good point -- and we work around/with that with proper maintenance (and considering purchase price).
Re- purchase price: I got ripped off at Costco (buyer beware!) having paid $350 last week! :-(
Re- no pressure at first firing: dis/re-connect hose, bleed air/water (repeat as necessary), then fire up...worked for me.
Re- hose breaking (not in this review)... concerned about this, but wondering if (for those i've read) they shot hard into the hose with the red spray tip?... I almost did, very strong etc.
Anyway, thanks again.. very good. My intent is to limp this along for years.
(but will return to Costo if it's a lemon...Costco is good in this way!)
Cheers.
If its still on sale take your reciept and ask for the difference. My family does that often.
Costco has a 30 day sale price retroactive refund policy. Just learned thst the orher day with some pool goggles for my toddler.
How do you set up the detergent line? Is there a way to switch to rinse from the detergent?
Hi Chris, it might be too late, but any chance you do a video on installing the valve?
You take the fuel line off, measure the fuel valve, and then cut the fuel line to match with it.
I had a husqvarna zero turn mower that lasted 18years and now have the second one
Thought the same thing about the bottle. Got the ball on the one yard line..and stopped.
I bought one of these machines a year ago. I used it a little bit, and then winter came. I started to use it now, and it worked a few hours, and now it won't start; that's why I am searching information now.
Torn between this Husqvarna from Costco or picking up the Ryobi 3000 PSI/2.3 GPM with the Honda motor from Home Depot. Which would you recommend between the two based off your impressions of the Husqvarna?
Both are good. Just don't buy Briggs and Stratton false advertisement that you don't ever have to change the oil. If you look deep into the owners manual it'll tell you how to change the oil. If it was completely unessasary they would tell you how to change it lol. Change the oil and both will be good. My dad has the Ryobi with the Honda. And I have this one from Costco. They both are very acceptable and similar performance. The one thing I like about the Ryobi is you can regulate the pressure while you can't with this.
Mazdaspeed how often should you change the oil cause I use my pressure washer all day everyday and I had it for a few days
And how do you change it
Thanks for the Review. Very informative. Any recommendations for the Soap Dispenser Bottle which will fit.
I think this should fit www.amazon.com/gp/product/B01HQMC8NQ
this works perfectly: www.homedepot.com/p/ZEP-32-oz-Professional-Spray-Bottle-HDPRO36/100007602
This fits and it includes some cleaner. Just rinse and refill with your own cleaner when done - amzn.to/39bXjom
Hey I’ve had it for 4 years and today it dose not crank, I left gas in the tank for month or so but I always had gas and no problem past years. What would you recommend.
UPDATE:1 year and still cranks within the first 2-3 pulls. Probably will buy another when this one finally does bite the dust ua-cam.com/users/postUgkx43QMbQqu67IZadu9ou8Sg1BdrunMRNqX . No issues at all. Very happy with it.UPDATE: After 6 months of use and over 70 uses I would still highly recommend this pressure washer. It does vibrate a decent amount but never had it “walk” like others have mentioned. No oil leaks, still seems to run like the day I bought it. Still cranks within 2-3 pulls every time. Very happy with my purchase!Have used it about a dozen times now. Plenty of power, cranks up on 1-2 pulls every time. My only complaint would be I wish it was a little taller to make it easier to walk with it (hits my ankles a lot) and that the two hose connections were a little further apart but it hasn’t caused me any issues. Seems to run a good 1-1/2-2 hrs on a full tank, overall a well built machine and definitely worth the money in my opinion.
Hey I’ve had it for 4 years and today it dose not crank, I left gas in the tank for month or so but I always had gas and no problem past years. What would you recommend.
Is there a drain bolt on the oil pan?
I have 12 started using it there is little pressure coming out of the nozzle hoses on. From water source
I just got this at Costco as well....great review 👍🏻 hoping to use tomorrow.... appreciate it!!
None of the manufacturers in this price range include the bottle. You can buy cleaner branded B&S or craftsman and then refill from the gallon jug. The warranty is pretty standard, if you are going to have manufacturing problems they usually occur 8n first 90 days
Just brought one from Costco and the bag of oil had a hole so was leaking in box. On my 2nd use of pressure washer oil started leaking. The air filter was soaked with oil. Have no idea how this happened. Of course it’s the weekend and no customer service. Not to mention I have oil on my backyard pavers. How frustrating
What caused that problem? And what you do to fix?
Just install a valve from Home Depot or Lowe’s instead of wasting your gas after every use.
Yep, I already did.
@@Mr-Chris Yea i just bought this and im glad i came across your vid, it was very informative. Thank you!
As you assumed carburetor went bed so I was wondering if you could post a video how to replace the carburetor and which one to use? Ty
I thought it was working pretty good the first time I used it to clean front door walkway and driveway. The second time I brought it out to the side of the house to clean some siding. As I pulled it out and made a couple of turns on the grass, the left wheel cracked and now the powerwasher has a broken wheel and the whole thing is tilted. So it’s seems to be easily dragged on concrete asphalt surfaces but very hard to maneuver on an inch thick lawn. Wish it would turn and change direction like my lawnmower which I’ve used the same one for over 15 yrs without wheels falling off like this brand new husqvarna powerwasher. Will be returning this one today. Even though it’s still under warranty, a replacement wheel will be a recurring broken item. Now I realize there are way too many cheap parts on the model (plastic carburetor, plastic gas tank, cheap light plastic wheels.)
You are so right, all of these newer power equipment like Lawn Mowers and Pressure Washers are built so cheaply compared to the older ones. It's like the peak of durability and quality power equipment was the Mid-2000's... Now they are built with so many plastic parts. I've been lucky with mines, but I am very skeptical on the durability of this. An other example is the newer Craftsman Lawnmowers... they are made of mainly plastic parts compared to the ones Sears used to sell back in the day made of mostly metal. They are still good quality power equipment out there, but at a higher cost.
The axial pump blew on me after about 20 uses, I have used many pressure washers before and I take good care of my stuff. Never leave them running when I'm not using them, I noticed before I'd start up after about the 5th time I used it there was air coming out of the gun with the water when I was trying to bleed the air out of the lines before I started it.
A week ago on the first pressure washer job of the season the unloader valve blew off leaving a Little hole in the pump. I tried to braze it last night but I don't think it's gonna hold, looking st a new pump after 2 years lol, I have a 15 year old Simpson water shotgun with the same general pump on it
Just got mine from Costco as well and it was missing the green 25 degree tip. wtf!?!? -.-
Should be going on sale at Costco soon. What did you pay?
Bought one today at 299 from 350 at Costco in California
Can you adjust the pressure?
Engin is running but no water presser, I don’t no what happened
Has anybody had any issues with recoil pulley assembly mine just recently went out and I cannot find a replacement part for it
Is motor oil and pump oil separate and if not what kind of oil do I use is 10w -30 ok ?
Thanks for the review! I just bought this PW today because my previous Yamaha PW took a crap on me. Thank goodness for Costco. And I figure the sweet orange frame must be the "Husqvarna" product. LOL
c2kygrk good thing Costco’s warranty is bullet proof
Thank you for posting this video, I just got mine yesterday, what happens if I start the engine without the water hose connected to it, will it destroy the pump?
Yes, if you start it without water, your pump will go bad faster .
I bought and just set up a Model PW3200 from Costco. It ran for 2 minutes and shut off. Has done that 3 or 4 times. Oil level full, not out of gas. Starts after a minute but stops again after 30 - 45 seconds. Water hose connected and seems to work well for the time it runs but keeps dying. Any suggestions.
Most likely your carburetor got gummed up with something. It possible that it had some small debris from the factory and got logged in after running for a short time. Another issue could be a faulty thermostat that dosnt automatically open the carburetor when it gets hot causing it to run for a little bit when it's cold, but shut down when it's hot. Either way, Return it back to Costco. This must be a faulty unit from the manufacturer.
Anyone have experience with cleaning the carb? I left a tiny bit of gas in the tank and I’ve tried everything else
What surface attachment did you use for your driveway?
We purchased one of these in the Spring. Used it a handful of times but has been sitting unused for three months with gas inside. Now it won't start and thanks to your video, now we know why. Is there anything that can be done at this point or have we ruined it? Thanks!
Try to drian out the old gas and then put FRESH NEW gas back in. You can try to tilt it getting as. Much old gas out.
@@Mr-Chris Yes! Thank you! And now I will install a fuel valve and track down the pump saver. Lesson learned! Thanks for posting this video and replying to my comment.
Can you anyone point me to which gas type can be used? 87, 89 or 91? Is fuel stabiliser a must? This video was extremely helpful.
Which fuel was it?
I just replied to Mia and Kai. But if anyone has info or solution to getting the brass ring to lock on the spray nozzle, I would so appreciate it!??? I am guessing this wand is defective. I lubed it but just can't get it to lock on the spray nozzle. Also... anyone else find the trigger lock annoying to depress in order to pull the trigger? I am really considering returning this thing to Costco!!!!
Also use a vise grip to turn the fuel off.
I have this model and the first time I used I shot out a o ring for the nose tip and the then the nose tip shot out too but don’t know where to get one?
Most hardware stores like Home Depot and Lowes sell "standard" generic pressure washer tips and o ring that should fit this. This pressure washer uses standard fittings.
Thanks for the thorough review! I ordered this the other day from Costco, when it was on sale for $299.99. I was wondering if you know how long the 0.3 gallon tank of gas will run for before having to fill up again. My driveway is about 800 sq. ft. and 0.3 gallons doesn't seem like it will be enough without having to refill. Thanks!
After using this a few more times, I can say that this is a bit of a gas hog, I find myself having to have a gascan on standby and fill up as needed. It's a powerful machine, but burns through gas.
@@Mr-Chris Thanks for the info Chris!
Great videos on the Husqvarna Chris, I watched them both. I am getting ready to buy one. Costco is having a sale on them but it looks like they upgraded the motor. Looks like yours is using the 875EXi 190cc but this year its using the CR950 208cc. How is your pressure washer holding up? Update so I purchased it and was a little bummed on a few things. 1st it looks like it is now made in China or at least that is what the box says. It also says the engine was designed in the US but assembled in China. It only comes with 1 tip that is a 7-in-1 nozzle not sure how I feel about this. Still a great price though.
Anyway to keep the trigger in the on position? I’m not finding a lock and it’s killing my hand to have to hold it on the entire time.
For safety reasons, the manufactures typically don't make the ability to lock the trigger on... at least with the several pressure washers I have personally used I never seen that.
Chris Well that does make sense but my arthritis can’t handle it!
So I can’t pull the string anymore on my new pressure washer. What do I do??
If your water and pressure hose are connected to the pressure washer...
Try to pull the trigger while starting it. If that doesn't work, Return to Costco, it's possible that your engine is seized.
Chris thanks!
hi.. bought mine today and hook it all up.. but the tip is straying from the sides along with the standard hole. Did I miss something?
I just tried to use this machine and have the same problem!!?? The problem is that I can't get the brass connector ring to pull up and lock the nozzle on. I have lubed it and still can't get it to lock the nozzle on the spray wand tip. I need to use this thing for a job I have to do, so if anyone has a solution, that would be great! Could this be a defect? I don't want to force it and shouldn't have to. Thanks for any help.
Check the O rings
Guess what?! Your prediction that this pressure washer would fail after 4 uses… I let the gas stay in it for 8 months and now she won’t start… when I take it in for service I’m getting a shut off valve on installed.
I didn't get the bottle or the soap bottle hose
is it normal for it the motor to surge up an down at idle? Mine surges when not using the hose but as soon as you start using high pressure water it revs up and stays consistent. I assume the surging has something to do with the water pump?
No it's not normal for it to surge at idle. I have another pressure washer that surged before and it turned out to be a clogging carburetor jet. This is a new pressure washer so it shouldn't be surging.
@@Mr-Chris Hey Chris. I just posted on this chain regarding getting a spray nozzle to lock on? Hope you can help? It seems the brass ring just won't go higher up to lock the nozzle on? water sprays all around the edge of the nozzle. Also... my machine seems to surge too, before I depress the trigger? Could that be from not completely fresh gas? Its several months old. I though would be ok. Main issue is the spray nozzle not locking on??? Thanks for any advice?
Mine surged and I returned it for another one that one surged too only when idling after letting pressure build so I just ignored it. This year I swapped the pressure hose for a Dewalt and installed quick connects also swapped the gun for a Dewalt one and no more surging... kinda weird but it works way better with the new hose.
I just set my Costco 3100 up and see in the manual not to use a water hose longer than 50 feet. Is this right? I was planning on using the 100 on my hose reel, if this is true, I will have to go and buy a 50, just for the washer. Not happy with that, plus the absent soap bottle that so many have noted, which is just plain dumb on Husqvarna's part.
I was just researching this, and from what I've read, there may be slight pressure loss with a hose longer than 50 feet. But, as long as your house is putting out 3gpm at the source, the pressure loss is minimal, about 50 psi on a 100 foot hose.
Anyone know what kind of oil this thing uses and where to find the drain plug?
it takes 10w-30, there is no drain plug, you have to tilt the entire thing to it's side and drain from the oil fill.
@@Mr-Chris thank you
This pressure washer is close to having just a hose for pressure intensity. I felt the scouring was too weak when it could not shear off weeds in the driveway. So with the yellow tip on (manual says it is 15 degrees and 2800 psi) I carefully put my hand into the stream about eight inches from the end of the wand. It was soft and full spray, but not a cleaning tool for stone or anything else. I was replacing an old Husky 1650 Electric pressure washer whose wand cannot be repaired anymore. The Husky had more power. Hard to believe, but true. I wanted this to be a good machine but it has NOT got the power to do the hard work it is made for. Another trip back to Costco. Is it me or do other people think Costco equipment is like Harbor Freight? PS this thing drinks gas.
Wow, I actually have their previous Yamaha generation pressure washer that Costco sold and I feel the engine is better quality. As far as the pressure... I'm not sure but maybe you've might have a defective product. Comparing this pressure washer to my sun Joe electric washer... this thing is more powerful. I've actually chipped some concrete at 15 degrees. But I am disappointed with the engine on this.
As for Harbor Freight, believe it or not their pressure washers are higher quality than this but much more expensive. I've been eyeing the predator 3100 for a few e.
I've got this same power washer with yellow tip it will strip varnish. Sounds like you got a defective model.
Where is the oil drain plug????
There is none, you have to tip the entire machine to its side and drain out of the dip stick tube.
@@Mr-Chris thank you. Changed it out yesterday and it was bad. Used 10W-30 Mobil 1. Took about 20-22oz
Can a on off vavle be added to to fuel line.
I imagine you could install something like this www.amazon.com/Briggs-Stratton-698183-Shut-Off-Selected/dp/B0038U3JKM
I added the one Chris mentions from Amazon, and it works great!
Put fuel stabilizer in your gas and it will start after a year of sitting
Good video. I have a question for you and hopefully you can help me out with my pressure washer issue.
It won't turn on but when I put a little bit of Carb/Choke cleaner, it works but only for a few seconds (Husqvarna 3100).
Thanks a lot in advance sir!
Did you find the issue?
@@ocasion3051
Yes I did... thanks
@@Hammer-pv7wg what was it? I replaced mine with ne gas and oil and nothing yet.
@@ocasion3051
I removed the carburetor and cleaned until I was able to start it.
Mine is not purging before first start.
I’m looking at this pressure washer Vs the ryobi 3,300 psi 2.3 GPM pressure washer. And after your review I’m leaning towards the ryobi. This will be my very first pressure washer and after watching a few reviews I think I like the “ idol down technology” on the ryobi. Endless there are any other suggestions you or others might have. I’m looking to spend hopefully under $400.
The Ryobi 3300 is the better choice. Especially if it has the Honda engine in it. If you can get that pressure washer less than $400 go for it. However I believe they retail for like $450.
Chris thanks for your input 👍🏽 and yes it’s $429 at Home Depot 😬
Hey, I was wondering if you had any other issues with the washer after almost a year?
no problem 1 year later. I changed my oil and it works just like when I bought it
@@Mr-Chris I need a review for changing the spark plug please
Owned mine for a year and use it once sometimes twice a week to wash the front of the house and sometimes the cars . Noticed that it started to blow white smoke every now and then
I didn't find where to drain the old oil to change it
There is no drian plug, you're supposed to tilt the entire thing to the side and drain the oil from the the dipstick tube.
@@Mr-Chris thanks
Currently at a no start had it maybe a year or less.
Was gonna buy one but people keep saying the pumps go bad super fast
I’ve had it for over 2 months still going very strong I use it everyday
I’m in my second year of owning it still going good. I did change the gun and hose to a Dewalt 4500psi setup and it got rid of surging for some reason. Also switch over to quick connections not a terrible power washer.
Can you use synthetic oil on this? If so which kind?
Yes you can, 10w - 30 synthetic
What you guys think about this PW for wash the car at home?
I hear that is to much PSI
I use the White (40) Nozzle and it works fine washing my two cars. Don't ever use the yellow or red on a car with this PW as it will ruin paint.
@@Mr-Chris 40 is what is always recommended for a vehicle.
Usually the muffler starts falling off smh 🤦♂️
Neighborhood is like hey dont be showing my crack! Lol
Is this a 4 stroke or 2 stroke? Would be great to know, thanks in advanced!
4 stroke
@@Mr-Chris you’re awesome brother thanks!!!!
Bottle - 3.50$ on Amazon.
Hi Chris
Thanks for your video. Could you do a follow up on all the hose connections? My oil fill used the entire bag as well.
Cheers
Susie
Father in-law gave me this model. He said he used it once and now it won't start.
It's most likely a dirty carburetor or bad gas. If you are handy, it's easy to empty the gas and clean the carburetor.
@@Mr-Chris there's no water running through it either. I think the pump may be the root of the problem
Is it worth it to buy ???
I got the same machine but mine says Murray
I have owned this machine for five months. Until yesterday it started and ran perfectly. I ran it dry yesterday and after refueling it ran about ten minutes and quit. The new fuel was about two months old but had Sta bil added. I drained the tank and put new fuel in. It started and ran about 5 minutes and quit and has refused to run since. I have cleaned the air filter and let it set overnight. Now, if I pull the engine thru with the switch in the off position 5 or 6 times then, turning the switch to the run position it will start and run about 5-10 seconds. Has anyone had this problem or have any idea on how to fix it.
It sounds like your carburetor is gunked up. If you're mechanically inclined you can easily remove it give it a clean and put it back. I've actually worked on this carburetor already just to Tinker around and it's easier than the metal ones
@@Mr-Chris Thank you so much for the quick reply. Will advise as it progresses
@@rodharder5736 did you figure out what was wrong? Mine is doing the exact same thing you described. It runs for 2 or 3 seconds then stops. If so, how did you fix it. Thanks for any info you can provide.
@@jasonkeel5828 I returned it to COSTCO for a refund and bought an electric. So far I am happy
@@rodharder5736 I might be doing the same thing. Thanks for the reply
Mine is brand new and the engine won't run more than 30 seconds before stalling.
Try seafoam to clean out your engine
I love buying at Costco but this is not a good deal for the price. I worked in a Lawnmower dealer for a couple years and those engines are not the customer favs. Actually, this deal is equivalent to buy at Sears the Craftsman trade line. I rather would get a Honda or Kawasaki engine. My friend is a 2 & 4 mechanic and he says to this, "no way Jose". I don't mean Briggs&Straton is a bad brand only on small models.
Good insight. What do you think tends to go bad with these newer B&G engines? I've only had honda and Yamaha engines recently. Most of my research says that these carburetors gunk up easy.
Is this one any good for pressure washing houses?
this is a residential power washer. If you're looking to power wash your home... this is a great power washer. However if you're looking a power wash many homes for business ... you should look into a commercial power washer
Chris how long will this pressure washer last if you using it for business?
@@XORGNMN this won't last long if using it for a business, the pumps on these are not meant to last. For Commercial, at a minimum go with Simpson pressure washer with a Honda engine.
I’m asking based on my budget? What is your definition of not lasting long. 6 months?
Great review Chris, Thank you!
Good review
Thanks for the review! Is this safe to wash cars with?
yeah, the white tip is what you should use tow ash cars. I already used this on both of my cars and it works great.
Chris thanks for reply!
I used to work at a body shop. Please don't ever pressure wash your cars no matter who tells you you can. If you have a chip in your paint the pressure from the water can go under the paint and pull up the paint and rust your car. I've seen it happen many times. Just hand wash it with garden hose pressure is the best way.
If you have absolutely no chips on your paint it should be fine but if you have even the smallest of chips it could cost you a lot of money.
@@mazdaspeed- - this pressure washer can be lowered to 300 psi which is just as soft as a garden hose.
It's a way to install a pressure regulator??
It’s for a beer
Mine won’t throw water out
Same here. No water comes out of the high pressure outlet.
Same
Purge the gun before starting.
Hi Octavio, was there any solution to this, am having same issue
Looks to me that they went as cheap as possible ( greed ). Never change oil smh , no fuel filter, no gas shut off , plastic carb , no bottle NO thank you
I just got mine in today
If you use full synthetic you will not need to change the oil. Ever. Promise. Secondly, DUDE what is UP with the bottle holder? No bottle? What kind of bottle? Where do you get this bottle? I have the answer: www.amazon.com/dp/B013BM8CKI/ref=twister_B07NQVY786?_encoding=UTF8&psc=1
I just bought this. Doesn't work. Water isn't making it to the pressures hose through pump. What a joke
I'm having the same problem.
Here is a video link for the fuel to use in your Husqvarna PW. This video compliments what Chris mentioned regarding fuel. Thanks for the info, Chris!
ua-cam.com/video/nX6CFlQbUXI/v-deo.html
Esta en español
No yo no tengo un video en español para este máquina. Pero te puedo decir que es una buena máquina, y hay que tener cuidado dejando gasolina adentro para mucho tiempo. Como la carburador está hecho de plástico la gasolina se puede coagular.
This is a complete piece of garbage. Used it once and it will not restart. Emptying the fuel every time you use it is ridiculous. Total waste of money, taking it back tomorrow.
I need un spanish
Any pressure washer under $1200.00 is all junk!!!
good to know
How do you change the oil ? Where’s drain plug ?
No drain plug, you tilt the entire machine and drain out of the fill tube like a lawnmower.
@@Mr-Chris That’s what I did. Cause I didn’t see any plug or screw