Great description of components and functions! (he reminds me of Dan Ackroyd in 1941 describing the operation of the bofors 40mm) ..... I am new to NV and just ordered a gen 3 unfilmed WP PVS14 but went with the old school setup of the Norotos 1 hole shroud with the TATM mount..... and Wilcox J arm and a norotos dual dovetail..
You had me until the " take a round on the lense" and I realized this was an airsoft vid. Can you say Operator? (I did not read any other posts before posting. But, lol, I was spot on with other critics
They play alot of MILSIM based games every year, from what i've read/heard, and these games require sometimes these things. It may seem like alot of money, but it's worth it. In my opinion he who can see in the dark owns it.
just bought a surplus mich 2000 for $50! only problem is, the current suspension is an x suspension and the rear screw hole is drilled nearly as high as the front and is also very close to the ear flap things. It came with a new H harness but the current holes placement is horrible and I cant fit my coms under my helmet. So, how do I drill and where do I drill new screw holes for the H harness? I also heard drilling holes in the helmet exposes and degrades the kevlar, how do I stop this?
The cost is probably around equal actually. The last quote on the GPNVG-18s was like 60k a year or so ago. Who knows what it is available for now among law enforcement and military.
Chris Christen 95% of the airsoft community doesn't hate them... any loser who doesn't have a team and can't hit a target with-out using full-auto hates them.
have you seen the footage?? go to their facebook page.. Mcknight was being a dickbag too.. i'm not saying they handled it right.. but Neither did OLC staff including Mcknight...
Wow, that's actually a good find. Thanks for showing me that. I'm still not a huge fan of their approach toward the sport, but this definitely changes my opinion of them.
Any idea on how to mount a Emerson action camera to a Mitch 2000 helmet? cant find any tutorials what so ever on it any help would be appreciated thanks
Ronin, what kind of suspension system are you guys running in the ACHs? I ran Oregon Aero pads in my MICH for years and now I'm trying the OpsCore OCC dial sys. It is far superior in stability when running my PVS7, but lacks comfort after a while. I was thinking of trying the TW Epic pad sys with an Ops Core H-nape. Any opinion also is welcome. Thank you.
I need some advice. I am looking to get some sort of NV monocular to mount on a helmet. I already have a clip on thermal rifle scope that I mount in front of my day scope to hunt hogs at night. its really hard to use the thermal for movement purposes at night, especially since I have to detach it from the rifle. Is there some sort of setup that would allow me to view NV through my left eye that would leave enough room next to my right eye to easily throw the rifle up and shoot through the thermal with my right eye?
yes, just because they dont have the ear swoop on the side doesn't mean they cant hold it up. i have a MICH 2001 and it runs them just fine, and its lighter too then the 2000. hope i helped
I mean Woodland as in M81, sorry wasn't sure if people would know wtf M81 was. AOR 1 & 2 has been seen in use, but I haven't seen many AOR2 on operators in A-stan.
Good shit. I use the same scope cover technique on my AN/AVS-9, but you might have just sold me on the Wilcox Amber filters. I see some of your guys do it in the vid, but if you drill a hole in the center of your scope covers, you can use it as a daylight cover too. --Nick
how did you guys attach your goggle on you helmet( did you have to cut the strap, fold it, sew the velcro on the strap)? i would like to do it to my but i don't how you did it, by the way love the video's!
I've never seen, though I'm still new to airsoft a team that has legit gear..Eagle Industries, LBT, real Kevlars..props to you guys..I sell gear and I know that stuff gets expensive..
Looking for a little info. I have dual tubes and ordered the norotos invg hyper breakaway mount cause everywhere I've called is on backorder for the wilcox g24. Will dual tubes function ok with the invg? Thank you for all the info it has helped alot!
Karl Dutschke -- The GPNVG is not "illegal" for any civilian to own. L3 currently sell it to .MIL and LEO agencies due to supply issues only. It could easily, without a single "legal" issue, be sold to civilians. It has nothing to do with legality, and a select few individuals do actually own them.
I think it's funny that everyone is saying stolen valor and keep saying they take airsoft to seriously but yet fail to realize half of the green Mountain Rangers are former military
Nissanholic Hey can you fellas help me out. I need a NVG helmet mount for my ACH. Are the mounts that go directly on the helmet, the female mount that the J arm hooks in to. Are these mounts mostly the same? Just a square essentially?
Shit, half of the adult airsofters are real combat vets, myself included. Im alot heavier that what i used to be and i love it when these young "studs" underestimate "the fat guy", and than "the fat guy" ends up whooping their asses. The guys on my team are all former military alot of us are former operators. But its all good, one day, us gray haired, chubby guys will meet up with you young bucks and show ya a thing or two.
never once did i say the land warrior was in every unit, it was just an example of the high dollar technology available.. but what stolen valor is there? where are they stealing this respect from?? because they have 6094's? because of their helmets? i can go buy an ops core for $120 on ebay how is that stealing valor? if they were to wear legit 75th Ranger battalion patches or airborn patches i would 100% agree on the stolen valor. but i just cant agree with that statement.
You're kidding, right? These guys NOD's cost well over $2000 each. The PVS-15's even more. If you want cheap Gen 1+ NOD's, then $300-400 is about right.
even after a couple of years, this is still my favorite reference video up til now
All these POGs getting mad at GMR for "Stolen Valor." Settle down Private and filter my damn water.
Great description of components and functions! (he reminds me of Dan Ackroyd in 1941 describing the operation of the bofors 40mm) ..... I am new to NV and just ordered a gen 3 unfilmed WP PVS14 but went with the old school setup of the Norotos 1 hole shroud with the TATM mount..... and Wilcox J arm and a norotos dual dovetail..
Wait are we still talking about airsoft because this seems over done a little
Can someone PLEASE tell me where I can get that mounting arm on the second helmet??
According to Ronin, the INVG is a "revolutionary arm". No pun intended.
Damn, I looked some of the helemets up with NVG's and mounts, it's 1,000's of dollars.
You had me until the " take a round on the lense" and I realized this was an airsoft vid. Can you say Operator? (I did not read any other posts before posting. But, lol, I was spot on with other critics
You need to do a video of wear you have all of your gear and hang out with your team
They play alot of MILSIM based games every year, from what i've read/heard, and these games require sometimes these things. It may seem like alot of money, but it's worth it. In my opinion he who can see in the dark owns it.
Thanks for the state of the art update on NVD mounts though. I have a PVSish device and can attest to wobble with Mil-Spec issue type mounts
Good to see you guys back on the scene!!!
god im so glad you guys are back!
just bought a surplus mich 2000 for $50! only problem is, the current suspension is an x suspension and the rear screw hole is drilled nearly as high as the front and is also very close to the ear flap things. It came with a new H harness but the current holes placement is horrible and I cant fit my coms under my helmet.
So, how do I drill and where do I drill new screw holes for the H harness? I also heard drilling holes in the helmet exposes and degrades the kevlar, how do I stop this?
which is that you use night vision?
which model and manufactures?
The cost is probably around equal actually. The last quote on the GPNVG-18s was like 60k a year or so ago. Who knows what it is available for now among law enforcement and military.
Nice Video. How did you mount the camera on the 4th helmet? Does the velcro do the job all by itself?
Could you guys talk more about the rest of your helmet accessories? I'm very interested in the goggle set up attached to the sides of the helmet.
Truly outstanding review! Thanks! By the way, haters are gonna hate, don't listen to those who want to criticize you.
So they shouldn't listen to 95% of the airsoft community... lmao.
Chris Christen 95% of the airsoft community doesn't hate them... any loser who doesn't have a team and can't hit a target with-out using full-auto hates them.
Dylan Loomis
Anyone who mouths off to a retired US Army Colonel over bbwarz is a dickbag in my book.
have you seen the footage?? go to their facebook page.. Mcknight was being a dickbag too.. i'm not saying they handled it right.. but Neither did OLC staff including Mcknight...
Wow, that's actually a good find. Thanks for showing me that. I'm still not a huge fan of their approach toward the sport, but this definitely changes my opinion of them.
Any idea on how to mount a Emerson action camera to a Mitch 2000 helmet? cant find any tutorials what so ever on it any help would be appreciated thanks
Ronin, what kind of suspension system are you guys running in the ACHs? I ran Oregon Aero pads in my MICH for years and now I'm trying the OpsCore OCC dial sys. It is far superior in stability when running my PVS7, but lacks comfort after a while. I was thinking of trying the TW Epic pad sys with an Ops Core H-nape. Any opinion also is welcome. Thank you.
Thank you. I learned quite a bit here. I am a bit less bewildered about NVG's now. Thanks!
depends on if they are at a tournament game or not, or if it's for a new gear company, ect, but yes you could.
I need some advice. I am looking to get some sort of NV monocular to mount on a helmet. I already have a clip on thermal rifle scope that I mount in front of my day scope to hunt hogs at night. its really hard to use the thermal for movement purposes at night, especially since I have to detach it from the rifle. Is there some sort of setup that would allow me to view NV through my left eye that would leave enough room next to my right eye to easily throw the rifle up and shoot through the thermal with my right eye?
yes, just because they dont have the ear swoop on the side doesn't mean they cant hold it up. i have a MICH 2001 and it runs them just fine, and its lighter too then the 2000. hope i helped
One problem with what you said about the ITT tubes being the nicest you could get that is wrong. Look at anvis tubes and it makes 14's look like shit.
Finally someone who speaks sense.
I mean Woodland as in M81, sorry wasn't sure if people would know wtf M81 was. AOR 1 & 2 has been seen in use, but I haven't seen many AOR2 on operators in A-stan.
Good shit.
I use the same scope cover technique on my AN/AVS-9, but you might have just sold me on the Wilcox Amber filters.
I see some of your guys do it in the vid, but if you drill a hole in the center of your scope covers, you can use it as a daylight cover too.
--Nick
How did you attach the contour? simple velcro and glue? I wouldn't like to glue it, but attaching to an arc and then a rail is so weird
Where can you get the lettering and numbers patch at the side of the helmet
how do i get into to competitive airsoft? any pros got any advice
Do you guys find yourself losing a lot of those wilcox amber filters?
how did you guys attach your goggle on you helmet( did you have to cut the strap, fold it, sew the velcro on the strap)? i would like to do it to my but i don't how you did it, by the way love the video's!
@HighReadyClips are you guys really army rangers? and if not do you know were i could get one of these night vision goggles thx
Damn, how much do you spend on your kit ? PVS-14 is about $2500.00 alone
Which one do you recommend mount and goggles
where do you get your nvg mounts and the goggle? i would like to check these out because i have always been interested in getting some
I've never seen, though I'm still new to airsoft a team that has legit gear..Eagle Industries, LBT, real Kevlars..props to you guys..I sell gear and I know that stuff gets expensive..
Looking for a little info. I have dual tubes and ordered the norotos invg hyper breakaway mount cause everywhere I've called is on backorder for the wilcox g24. Will dual tubes function ok with the invg? Thank you for all the info it has helped alot!
No. NVGs for Milsim. There is a large difference.
Where do you get your helmets? I know what kind I want but there are so many out there and I don't know what is the best can you help?
They all look like the ranger helmets from call to arms?
Imagine having all these gear only to get shot by a 14 year old who got a $100 gun for christmas
Where do you guys purchase your NVGs and how much do they typically run for?
Pretty soon they will be using the 4 tube NVGs XD love the channel
If they have a spare $38,000 to spend on something that is highly illegal for a civilian to own...
Karl Dutschke -- The GPNVG is not "illegal" for any civilian to own. L3 currently sell it to .MIL and LEO agencies due to supply issues only. It could easily, without a single "legal" issue, be sold to civilians. It has nothing to do with legality, and a select few individuals do actually own them.
You mean the GPNVG-18? it`s 35k on Ebay :D
Go Geo Absolutely bonkers.
ive seen some of the sfod-d guys shit in afghanistan, and it makes those nods look like pvs-5's
You guys look like the most legit milsim team, i mean pvs 15's are pretty expensive
Can you guys do a second line video ?
How did you fixed the glasses on the helm?
Where do you buy the nv goggles and how much do they run for? I'm going to a few big ops and I need 1 that wont get ruined by a flashlight
I got the Norotos Rhino arm and i have never had any wobble
good idea on using bfa as barrel plugs
you from New Jersey by any chance?
Hello i am sorry to bug you but i want to see what you think is the best night vision that can be found for 1000usd or less?
Did you buy them and if so are they any good?
what website did you get this stuff from and how do you gget night vision stuff
Why are there BFA's on your airsoft guns?
Nice video! But what's the first helmet name ?
Mich 2001.
Its called a hobby, a passion and money management
is it possible to make some tactical tutorials??
Has $20K+ worth of night vision goggles for airsoft LOL.
Deceivingly Charming Better to use it for airsoft against people than paper targets on a range
@@rifleshooterchannel208 ex military
I would rather spend that money on one good set and then training. Like real training and ammo. So much ammo.
What brand of helmets do you guys run?
does the one that looks like a binocular alloows you to see in 3D? (i mean, you have real deep perception whit this googles)
what night vision monocular system is that on INVG Mount??
The some of the helmets seem pretty small. Could the MICH 2001 safely hold up NVGs?
Safely yeah, safely for the nvgs matters on if it’s a real one or airsoft, if it’s airsoft nah
im a little curious how you guys were able to afford nightvision
Those are pvs-14's they aren't cheap.
What rifle do you run? any company suggestions?
You can fine them around the net. Like ownthenigh(DOT)com is a major store. and they start at $3000 for the newer ones and go up to $10,000+.
And which camera are you using?
Where to buy cheap night vision ? By the way your youtube channel is really incredible.
eBay, Amazon, wish, wish and Amazon nvg won’t work, eBay will but it’s bit more expensive and you gotta watch it for awhile
Do you guys run real MICH helmets, or replicas?
What would you need a Wilcox arm for 15s?
How do you protect your eyes if you have the monocle version?
you have listed the mounts but not the goggles please list the ones you have used thank you
You think its because he probably spent an unbelievable amount of money?
+Joel Blanco The goggles are mentioned near the start. 0:30. Most of them are AN/PVS-14, and there is a AN/PVS-15 near the end.
Thank you so much i musy have missed that
In Canada you can own Gen 3's? Just cant import them..?
where can I get replica night vision for rhine night vision arms
Quad-eye nightvision systems cost approximately $60,000. I would agree!
@plowdawg555 unless theyre just airsoft replicas......are they?.....last time I checkd, gen 3 nv equipment starts at $2k+
Maybe because this video was released about a year ago.
Hate to admit that this was a helpful video. There's many options to mount my PVS-15.
+TripleU lol True
good video buddy.. keep them coming
Where do u purchased the night vision?
I think it's funny that everyone is saying stolen valor and keep saying they take airsoft to seriously but yet fail to realize half of the green Mountain Rangers are former military
Matthew walker still don’t justify the obsession probably a bunch of POG nerds
Taddletale Strangler how's that 1 subscriber working for you?
Nissanholic Hey can you fellas help me out. I need a NVG helmet mount for my ACH. Are the mounts that go directly on the helmet, the female mount that the J arm hooks in to. Are these mounts mostly the same? Just a square essentially?
Shit, half of the adult airsofters are real combat vets, myself included. Im alot heavier that what i used to be and i love it when these young "studs" underestimate "the fat guy", and than "the fat guy" ends up whooping their asses. The guys on my team are all former military alot of us are former operators. But its all good, one day, us gray haired, chubby guys will meet up with you young bucks and show ya a thing or two.
Jack Grant murica
will the wilcox L4 G30 mount fit on the ATN Night Cougar Lt
never once did i say the land warrior was in every unit, it was just an example of the high dollar technology available.. but what stolen valor is there? where are they stealing this respect from?? because they have 6094's? because of their helmets? i can go buy an ops core for $120 on ebay how is that stealing valor? if they were to wear legit 75th Ranger battalion patches or airborn patches i would 100% agree on the stolen valor. but i just cant agree with that statement.
You're kidding, right?
These guys NOD's cost well over $2000 each. The PVS-15's even more.
If you want cheap Gen 1+ NOD's, then $300-400 is about right.
are any of you in the military?
is this the official GMR channel
Where can I get the pbs 15 the last helmet set up
where do u guys play at ????
what ops and companies
Are those ANVIS tubes?
but what if you just wanna run around at night and shoot things ?
im not gonna do the math but i can tell you L3-GPNVG-18 cost around $40,000
are these all real an pvs 14/15? or just the style?
a pvs-15 is about 12000, what do you guys do for work?
what comms do you run?
Yeah where are y'all playing
what kinda mich 2000 do you guys have?
how much does all your equipment go for
but where the hell do you get all these pvs s????