You don't have to give up your car or have a cold shower , This technology is here to use for a greener planet. If not for your benefit for our children's. I HAVE Thanks.
Unscrew the bottom retaining cap, pull the tube out in a downwards motion, push the new one in, screw in the bottom retaining cap. As easy as replacing florescent tubes almost.
it's sad to work on a such noisy environment and there is tons of cheap solution that can reduce the noise tremendously... why Chinese doesn't care about themselves?
Cheap solution huh? If you are talking about hearing protection like ear plugs, then I agree with you. If you are talking about cutting down the noise at the source of the noise... Not going to happen. The noise from this factory is from the highly compressed air to blow out the tubes to keep them, well tubes, as the glass cools down. I work at a shipyard that uses 150 PSI tools, and when someone opens up the airline by accident without a tool. It's super loud. I guarantee you that the compressed air at this factory is well above 150 PSI.
The fabric sleeve prevents the tubes scratching each other, and the getter scratching the outer tube, as one tube is slid into the other. Once the inner tube is all the way in, the sleeve is no longer needed, and is removed. Wasn't that obvious from the video?
Late to the party but the tube is double walled glass tube which absorbs sunlight to heat up a copper heat tube inside the glass tube. The copper heat tube transfers the heat to a manifold for hot air or hot water. The heated water stays inside the insulated manifold and never comes in contact with the glass or copper tubes.
@@drewberrynews3875 i should explain: at the time i searched for through pipes with vacuum shielding, like Schott "PTR 70". i want to pump the liquid thru the pipe, as it done in the industrial solar plants.
@@alexkart9239 yeah these are definitely not made for pressure. These are good for heat exchanger. So if your goal for example is to heat water the you can grab the heat of these to heat the water. But these are definitely not for a pass through system.
intresting productions very nice like this
You don't have to give up your car or have a cold shower , This technology is here to use for a greener planet. If not for your benefit for our children's. I HAVE Thanks.
You better buy all those workers some Peltor Optime III ear muffs! Those sounds will make you all deaf in 5-8 years time.
6.00.... he’s testing the tube- ONLY because the camera is watching. Normally Chinese quality inspectors are asleep...😂😂😂
It depends on the client. If the client pays more, they up the quality checks to give you a better product.
Very good project
Nice work
this is what I am looking for this.. this is awesome..
What kind of glass is used in the manufacturing of these tubes? Tempered glass?
No its borosiliate and breaks rather easily.
@@drury2d8 Boron and Silica. Got it, thanks.
Where is the factory?
Good
interesting where is this? any name?
la lamina oscura que le meten al tubo, como se llama?
carburo de silicio.
السلام.عليكم.انا.صلاح.عاوزاتواصل.معاكم.اشتري.زجاج
Sir,
I am from india,i want 12mm & 15mm glass tube.. please reply🙏🏾
Like
Amazing technology 🇵🇰💞
How to buy this materials in bulk orders...plz reply me
this guys need some protection equipments
very good
thank for the showing
whats the name of this factory ?
How to replace the broken glass tube of redeem water heater system+?
Unscrew the bottom retaining cap, pull the tube out in a downwards motion, push the new one in, screw in the bottom retaining cap. As easy as replacing florescent tubes almost.
Hi, can I procure this machinary? If yes, please ping me
Interesting, but failry useless video without a technical voice-over. In English..
Made in China
evacuated tube #1
Wwwo
Good
it's sad to work on a such noisy environment and there is tons of cheap solution that can reduce the noise tremendously... why Chinese doesn't care about themselves?
kid, everywhere factories are the same. You are lucky you do not need to work in one to earn your lifehood.
Cheap solution huh? If you are talking about hearing protection like ear plugs, then I agree with you. If you are talking about cutting down the noise at the source of the noise... Not going to happen. The noise from this factory is from the highly compressed air to blow out the tubes to keep them, well tubes, as the glass cools down.
I work at a shipyard that uses 150 PSI tools, and when someone opens up the airline by accident without a tool. It's super loud. I guarantee you that the compressed air at this factory is well above 150 PSI.
China is capitalist?
This is why, for the same quality products, Chinese goods are always cheap.
@@miketang448 agree
Price for 1 tube?????
this is very bengchheng
. Sudarshan solar jalgaon
Hiii
i want quotation of tube
Our factory produce it, Email address: solar@chinayaoguo.com
@@helenzhao3745 I want to buy a 18 year old chinese girl to be my servant and whore. How much for one including shipping?
@@helenzhao3745 I want to order solar system like water heater's in bulk...can i
wow!
how much does each cost?
Around 10 dollars in retail
I am looking for this machinery , if someone can provide then please ping me personally.
Hi mem i also looking this for 1 month can have any idea ?
Es fehlen Ringe
Cannot hear a word you saying !!!!!!
I am working
What's the name of the dark coating that's applied to the inner tube?
little3rddegreeburns it’s technical name is “black paint”
hahahahahahahahahah @@jeremywestern7067
4.20 one clown puts the tube in a bag then hands it to another clown who takes it out!!!😂😂😂
Hmm. Could it be so as not to touch it, before painting?
The fabric sleeve prevents the tubes scratching each other, and the getter scratching the outer tube, as one tube is slid into the other. Once the inner tube is all the way in, the sleeve is no longer needed, and is removed. Wasn't that obvious from the video?
sir price of tube
有丟失的戒指
If these are for Solar water heaters, they won't be vacuum tubes, but they will be filled with water all the time.
Sunil TG these tubes are double-layered. The vacuum occurs in the space formed between the outside layer and the inner layer.
Late to the party but the tube is double walled glass tube which absorbs sunlight to heat up a copper heat tube inside the glass tube. The copper heat tube transfers the heat to a manifold for hot air or hot water. The heated water stays inside the insulated manifold and never comes in contact with the glass or copper tubes.
@@stephenowens5375 tnx for explaination ...guess we are never too late
@@jahstafari4606 your very welcome 🤗
One end is closed. Liquid cannot go thru the tube. Useless product.
You have no idea what you're talking about
@@drewberrynews3875 i should explain: at the time i searched for through pipes with vacuum shielding, like Schott "PTR 70". i want to pump the liquid thru the pipe, as it done in the industrial solar plants.
@@alexkart9239 yeah these are definitely not made for pressure. These are good for heat exchanger. So if your goal for example is to heat water the you can grab the heat of these to heat the water. But these are definitely not for a pass through system.
Good
very good
السلام.عليكم.انا.صلاح.عاوزاتواصل.معاكم.اشتري.زجاج