Just a follow up. I was able to get the frame back in working order. I noted your earlier advise that I may have to switch the blue and black wires due to a polarity change in the newer push block. I am back in business... Thanks again
I've got a bed that's fitted with 2 okin motors. The one side of the bed works perfectly (head and foot end), but the other side is on a "go slow", both head and foot end. Both motors are dead quiet, with no unusual noise, so I'm not sure if this could be a problem with the board. The motors are powered by a remote controller. Do you have any ideas as to what might be wrong with this unit, as you did not mention anything in the video about one side running slower than the other. Thanks for the upload 👍
My Okimat 2 motor case is cracked exactly as the one in the video, and we did it without the help of any kids, and without jumping on the bed. Do you have any ideas on how to strengthen that case so that, even though cracked, it will function again?
We have okimat ipse motor unit that only works slowly on the back up 9 volt battery. The mains power does not work, yet the socket on the wall is giving power, checked with a meter. Any ideas on the problem? Thanks
Just a follow up. I was able to get the frame back in working order. I noted your earlier advise that I may have to switch the blue and black wires due to a polarity change in the newer push block. I am back in business... Thanks again
I've got a bed that's fitted with 2 okin motors. The one side of the bed works perfectly (head and foot end), but the other side is on a "go slow", both head and foot end. Both motors are dead quiet, with no unusual noise, so I'm not sure if this could be a problem with the board. The motors are powered by a remote controller. Do you have any ideas as to what might be wrong with this unit, as you did not mention anything in the video about one side running slower than the other. Thanks for the upload 👍
My Okimat 2 motor case is cracked exactly as the one in the video, and we did it without the help of any kids, and without jumping on the bed. Do you have any ideas on how to strengthen that case so that, even though cracked, it will function again?
We have okimat ipse motor unit that only works slowly on the back up 9 volt battery. The mains power does not work, yet the socket on the wall is giving power, checked with a meter.
Any ideas on the problem?
Thanks
It’s the internal transformer that has failed. The motor will need upgraded and replaced.
@@theadjustablebeddoctor4300 The motors are ok, they work fine with the battery. Do you know where can I obtain the board with the transformer?
Thanks
anyone here has a board for the okimat 2 ?
Anyone know where I can get a remote for this motor?
We can help you with that remote. Call our office during business hours to order.
@@theadjustablebeddoctor4300 thanks I will! What’s the number? And do you ship to Canada?