ShopJimmyO.com Support the build!! / jimmyoakes / jimmyoakes Send some sub mail!! Jimmy Oakes PMB 169 61 N. Plains Industrial Rd. Wallingford, CT 06492
i love that you put JP in the video ! always watching his work on instagram , this guys clearly dont have time for a youtube channel but it would be amazing
Would love to see one of those inflatable spray booths in that new space so you guys could start doing your own paint. Would help out at lot instead of waiting on professional painters, not to mention the cost involved. You would save heaps.
@@bigtravis2004 Have you seen Devin Niemela's? Looks pretty decent and he said he liked it. Sprayed an entire STI hatch with it too it wasn't just a small project.
I have not. I have one at work and the lighting is horrible, fire marshal won’t let it inside the building so it’s always either too hot or cold, even with a heater blowing into it. And it doesn’t hold up to weather. I’m sure if it’s inside and you have a lighting solution it would be workable on a hobby level.
@@bigtravis2004 Interesting, thanks for sharing your experience. I know Devin has done it inside and outside. While inside, luckily he had a lot of sun beaming in so I don't think that was an issue for him, I can see where it would be though if you live in a shady dark area.
For the white S14, mock up a Supra or Neon Srt-4 wing. I think it would fit the body lines. Maybe a 02 Sentra SE-R wing. Would be interesting to see Jimmy go to a junk yard and find a wing that might work. For the new shop have some local graffiti artists come paint the walls
I know it's probably been said 1000x times at this point, but Stevie is the fuckin man. positive energy 24/7 and the commentary between shots has taken this channel to the next lvl... shoutout to Jimbo for extending the fam to a much needed addition.
Hit up Wildfire lifts they have a completely moveable 4 post lift system the lift is a double wide setup so you can have 2 cars on top and fully raised you have like 7ft of clearance underneath
I will say, if you want to get SERIOUS into fabrication, pick up a CNC plasma cutter and a bed scanner. Just, like, a common USB document scanner, combined with some scrap paper that you used to cut up and make rough templates for the parts you need, and a free vector graphics application like InkScape, should allow you to feed your CNC plasma cutter with the cut paths it needs to make your raw components that you tack together, figure out any fitment issues, then weld all the way around. I just watched a guy in a shop in eastern Europe make some one-off engine mounts to fit a 1UZ-FE 4.0L V8 into a Mazda MX-5. He also used it to cut the reinforcement blanking panels that he needed to patch back together the engine bay and sub-frame supports that required notching to fit the engine. It was magical to watch. Of course, a CNC plasma table is expensive. I think they're around $4.5K for a 4'x3' bed size with the CAD and CAM software and the plasma cutter included, which is a good deal of money, but it makes it so much easier to fabricate parts out of steel or even aluminum (though aluminum can be much more difficult to cut in large thicknesses due to its higher electrical conductivity compared to steel).
Definitely put two more four post lifts in there. Then you will have twice the amount of car storage in there, and lets be honest...we all know you're going to need it.
JP seems to be a knowledgeable dude love the vibes you already know when someone knows what they’re talking about they emphasize on how to save you some money and making horse power this man needs a UA-cam channel ASAP🎥🔥🏁
For your new room you could paint the half with the cars white and make it like a clean room / showroom for your "completed" builds. Then the other half for your component storage. Great work Jimmy!
You should definitely have 4-post lifts in that new area, and do them now before it's too cluttered. By summer you have purchased 6 more cars so you will need them :D
Wildfire Lifts makes a 4 post lift that fits two cars on top and they do collabs with youtube channels. They are a small father son company, you should definitely reach out to them.
Wildfirelifts has a movable 2car 4post lift and a few other that are great. They sell to "prosumermers" aka consumers that aren't commercial and need pro equipment.
I would love a story time video on how you got started how you learned everything you do! The stuff your able to put together I’d love to know if it’s been trial and error, books, internet, school? How’d you get where you are yk
Wildfire Lifts has a dual car lift 4 post. 2 up top, 2 down below. Would be perfect. Offtheranch new video shows them pretty good. Think they're like $10k tho.
That would be cool to do the three two car post were the car is now and also put shevels on the left side wall and organize all the parts so u know were everything is that would be cool
I don't know if you know this but the shifter location in the MK three supra is different it's not a tripod shifter set up it loads directly into the transmission and you don't have to modify your car as much
JP needs a UA-cam channel already. People will support him on Patreon just to watch him build motors all day.
Facts
He’s so dedicated to his craft as is, he barely has any time sadly.
He doesn't have time for all that unfortunately. He does post a fair bit on his Instagram stories though
@@P1Mitchell He needs a Patreon and some JP Spec merch
For sure
That's hilarious, Rj picking on Tony like always, bantering and Stevie comes in, shuts him down and Rj instantly apologises 😂😂 comedy gold
Dead that was hilarious
1440p with 60 frames looks so smooth love the upgrade!
I switched when they pushed the kouki in to the new bay. The jitter is what had me looking. So nice in 1440p.
The second JP said "I wanna play around with the headwork" you know Jimmy was like "oh we are making All the Jam!" Exciting Stuff
Can we give RJ more time to shine ! I would love to see more of him detailing paint ! Trying to learn myself.
i love that you put JP in the video ! always watching his work on instagram , this guys clearly dont have time for a youtube channel but it would be amazing
Make the room a “show room” kinda thing just for car storage and show them off new paint fancy floors and then lights would be awesome
Would love to see one of those inflatable spray booths in that new space so you guys could start doing your own paint. Would help out at lot instead of waiting on professional painters, not to mention the cost involved. You would save heaps.
Brian has a booth at his shop already! We just need more hands on deck that are knowledgeable with body work 💪🏼
Those inflatable booths are garbage
@@bigtravis2004 Have you seen Devin Niemela's? Looks pretty decent and he said he liked it. Sprayed an entire STI hatch with it too it wasn't just a small project.
I have not. I have one at work and the lighting is horrible, fire marshal won’t let it inside the building so it’s always either too hot or cold, even with a heater blowing into it. And it doesn’t hold up to weather. I’m sure if it’s inside and you have a lighting solution it would be workable on a hobby level.
@@bigtravis2004 Interesting, thanks for sharing your experience. I know Devin has done it inside and outside. While inside, luckily he had a lot of sun beaming in so I don't think that was an issue for him, I can see where it would be though if you live in a shady dark area.
Stevie’s bead idea was sick 🔥🔥🔥🔥
Ant's giggle explained the entirety of that joke! I love the chemistry this crew has. No beef, only love!
For the white S14, mock up a Supra or Neon Srt-4 wing. I think it would fit the body lines. Maybe a 02 Sentra SE-R wing. Would be interesting to see Jimmy go to a junk yard and find a wing that might work.
For the new shop have some local graffiti artists come paint the walls
All great ideas!
And EPOXI FLOORS
You really need a wildfire double wide lift like vice grip has. Or even his 4 post cuz its can roll around with a damn car on it..
I was literally coming to the comments to suggest the same thing, it would be perfect for that space in the back!
Same thoughts here!
I know it's probably been said 1000x times at this point, but Stevie is the fuckin man. positive energy 24/7 and the commentary between shots has taken this channel to the next lvl... shoutout to Jimbo for extending the fam to a much needed addition.
You need one of the double wide 4 post lifts that demo ranch just got!!
Was thinking the same thing
Would be amazing! I think they’re like 10 grand though 😅🤣
@@JimmyOakes I'm sure you could work out a deal with the company
@@JimmyOakes Theyd sponsor you for sure man.
Hit up Wildfire lifts they have a completely moveable 4 post lift system the lift is a double wide setup so you can have 2 cars on top and fully raised you have like 7ft of clearance underneath
Clicked so fast left the video i was watching for jimmy
I love the fact that jimmys shop is expanding like in a video game, just busted down a wall and upgraded his floor space
That clip from jp was sooo informative! Thank you for including that in.
I will say, if you want to get SERIOUS into fabrication, pick up a CNC plasma cutter and a bed scanner. Just, like, a common USB document scanner, combined with some scrap paper that you used to cut up and make rough templates for the parts you need, and a free vector graphics application like InkScape, should allow you to feed your CNC plasma cutter with the cut paths it needs to make your raw components that you tack together, figure out any fitment issues, then weld all the way around. I just watched a guy in a shop in eastern Europe make some one-off engine mounts to fit a 1UZ-FE 4.0L V8 into a Mazda MX-5. He also used it to cut the reinforcement blanking panels that he needed to patch back together the engine bay and sub-frame supports that required notching to fit the engine. It was magical to watch. Of course, a CNC plasma table is expensive. I think they're around $4.5K for a 4'x3' bed size with the CAD and CAM software and the plasma cutter included, which is a good deal of money, but it makes it so much easier to fabricate parts out of steel or even aluminum (though aluminum can be much more difficult to cut in large thicknesses due to its higher electrical conductivity compared to steel).
Rjs always talking about ants height meanwhile he’s barely taller than him 😂
Definitely put two more four post lifts in there. Then you will have twice the amount of car storage in there, and lets be honest...we all know you're going to need it.
This 1440p60 is bloody amazing. Keep this vid quality up, keen to see this chaser done
Literally everyone in the squad is building shops. Sick cars. Buying good cameras. This is the year yall keep grinding
Congrats on getting Tommy’s yellow Z. Know you’ve wanted it for a while now
Gotta get one of those double 4 post lift. Hide 4 cars over there like it's nothing. Demolitionranch just got one, it was sick.
JP seems to be a knowledgeable dude love the vibes you already know when someone knows what they’re talking about they emphasize on how to save you some money and making horse power this man needs a UA-cam channel ASAP🎥🔥🏁
Industrial ranking is strong enough to put a car on. You could use a 4 post lift to basically make an easy access for more long term storage
Wildfire makes a double 4 post. Check them out. Demo Ranch and Vicegrip garage bot have them.
support the drywall above the door, it's just hanging there since you cut it. it needs support.
That chassis looks perfect in that room. Shining above all its peers. Love it.
You guys should get one of those double car 4 post lifts. Vice grip garage and Matt from demo ranch have one. They look pretty legit.👍🏽
He has 2 of them at the front of the main shop already
That's definitely an FD under that cover 👀
hit up wild fire lifts!! its a father son company . they have 4 post lifts that are 2 cars wide as well
love the use of the back bay
Much less mess, noise and destruction than the DJ/Dagnell Demo combo, 6/10. 😂😂😂
Wildfire lifts. You can get q double wide lift. Ask for a Sponser
Gang? You here?
Jimmy needs to hit up those guys that were in demoranchs video for a double wide 4 post
Sup Jimmy and the Gang hope y'all are a having a kickass day I was gonna swap my radiator in my 325ci but gotta do wedding stuff 😂 I'll get to my car
E46?
@@716tg3 auto trans
Aye fellow auto trans 325ci boys. Are you swapping in an OE radiator?
For your new room you could paint the half with the cars white and make it like a clean room / showroom for your "completed" builds. Then the other half for your component storage. Great work Jimmy!
get the double car 4 post lifts. seen alot recently and it would work amazing here
look into wildfire lifts, they make a double wide 4 post, two cars up and still can put two under it all!
You need a double wide four post. Lift two and park two under it
Man you should grafitti the Walls in the new Shop so you dont forget the History behind the "old" Shop. I think thats a really cool Idea.
You should definitely have 4-post lifts in that new area, and do them now before it's too cluttered. By summer you have purchased 6 more cars so you will need them :D
Another S15 !!!! You can see the sharp rear line plus the round headlight shape. 3 S15s like BOOM
8:34 Rjay more like “it won’t be that bad when there’s fourteen in here” 😂😂😂
So good to see a 1jz going in it
Double wide 4 post is a must
Shop renovations
Shop updates
Anything shop is the best content😂😂😂
Get with wildfire lifts and get a double wide or 2 in the new storage bay!!
New 60fps camera quality looks sooooo good
Theirs a supra under the cover by the garage door, long front end with short rear end and a coupe 100% a supra with no wing lol
would be cool to do a glass sliding door
Make it wider you can store your trailer and stuff.... no worries of nobody stealing it
happy sunday y’all!
Wildfire Lifts makes a 4 post lift that fits two cars on top and they do collabs with youtube channels. They are a small father son company, you should definitely reach out to them.
The steering rack is slightly different to the turbo model as well. It's much softer.
Wildfire lifts makes a 4 post, double wide lift
Jimmy also needs to treat them to a couple of viper chairs. Their knees and back will thank them in the future.
Wildfirelifts has a movable 2car 4post lift and a few other that are great. They sell to "prosumermers" aka consumers that aren't commercial and need pro equipment.
Loved the bit with jp, was hoping for more!
Ayyyy jimmyy I’d love to see the space in the new shop as a little man cave/showroom!! Much love to all you guys all the way from the uk 🙏🏿
Steve does has a gs. ya know a nice turbo kit, and a shift kit and it really will be a Tourer Steve. Unless its a 400, then do the m90.
You need to put a nice epoxy floor down and make that back section a “showroom”
You need to line the new door with all the license plates. Or cover one of the walls in the other shop with them.
Prank RJ and pull the mini truck In The merch office it would fit through that hallway
that would be awesome
You should get that 2car 4post lift that Matt from offtheranch just got. The thing is awesome portable and takes up less space than 2 4post
Jimmy and gang y'all rock! Love the channel and content! I'm here for the algorithm! Peace
I would love a story time video on how you got started how you learned everything you do! The stuff your able to put together I’d love to know if it’s been trial and error, books, internet, school? How’d you get where you are yk
Get a Wildfire double wide 4 post lift! Their shit is really nice!
1440 60 damnnn. Love it
Wildfire lifts have 2 car 4 post lift .. 2 cars on top and 2 cars on bottom
Long as they also magnaflux the crank for cracks your Good
The most useful hole since the corvette museum sink hole.
🤣
Its the most useful hall since b-hall
Demo ranch just got a double 4 post you should look into that for the new garage
Nice Fd under the cover....👌👌👌👌👌👌
Probly another 3-5 weeks and the weather will turn here where I’m at
Love the extra storage space! Also, keep up the big push on the JZX!
Hit up wildfire lifts, they work with content creators and they make a double car 4 post, that's 4 cars worth of storage
Quick little comment from the begging of the video, I saw that sneaky little car at the front of the shop.
Damn called out in the video live. I'll just shut up now lol
J z 100 looking classic and you have a good fleet of cars .I guess you work hard play hard .
I'm go ahead and take my guess for 1:03 its either another S chassis or from the shape it looks like an SW20.
We wanna see you put the cars in the new shop it’s a big deal to us too!!!
Double car 4 post lift is the way to go
Wildfire Lifts has a dual car lift 4 post. 2 up top, 2 down below. Would be perfect. Offtheranch new video shows them pretty good. Think they're like $10k tho.
BUY A VOLVOOO!!!!
240-740 or 940 dont be no pussboi
Look at wildfire lifts they make some dope two car lifts
This video is just full of exciting stuff 😌💯
That would be cool to do the three two car post were the car is now and also put shevels on the left side wall and organize all the parts so u know were everything is that would be cool
“I wanna play with the head “ i lost it 🤣🤣🤣
LETS GO JIMMY GOT A SUPRA CALLING IT NOW!
Jimmy always cover the windshield the sparks can scar the glass wicked build though
Love the build sorry I should have let you know to cut the trans tunnel.
I love your builds, sad we never get to see content on the maroon 33 anymore, car is definitely underrated
Check out the double wide 4 post lift Demolition Ranch Matt just had installed on his "Off the Ranch" channel.
You guys should open the other garage door and two step in the office area while RJ is working lmao
Need that wildfire lifts double 4 post lift look at the one they just did for demolitionranch 2 cars up top 2 below
I don't know if you know this but the shifter location in the MK three supra is different it's not a tripod shifter set up it loads directly into the transmission and you don't have to modify your car as much