How To Replace Chevy U-Joints (2001-2006 Trucks & SUV's)
Вставка
- Опубліковано 3 жов 2024
- Bryan916 Amazon Store
www.amazon.com...
Tip Jar
Venmo @Bryan-Williams-562
ACDelco Professional U-Joint Part# 45U0108
amzn.to/30VeXx1
Valvoline High Performance SAE 80W-90 Gear Oil (Front)
amzn.to/3CNcy4l
Valvoline SynPower SAE 75W-90 Full Synthetic Gear Oil (Rear)
amzn.to/3HRE9ox
Thank you for showing me the correct process nobody else showed this kind of U-joint
Yep! Heat is the only way I have found to get original GM u-joints broken loose. Thanks for the video! There is only one other video I have found but they are doing it at a shop with professional everything. This is perfect for people at home.
A shop here in North Carolina was trying to charge me $250 just to change my u-joints. I’m so happy I came a cross your video. Thanks bro 😎
That Tahoe is beautiful, thanks for the info Dave heitman
awesome video Bryan916. Love the cleanliness of your work. Very well explained. Thank you for sharing.
I just saved $300 great video 👍
Clean and concise. Nice work Sir, thanks.
Very well explained. Thank you!
I have a 2003 Chevy Silverado.. a 1995 Chevy S10 and a 1985 Oldsmobile wagon. I was working on changing the U-joints on the Olds wagon and it also has the plastic injected retainer ring on U-joints too just like your Tahoo.... so GM obviously been using the plastic injected method for a long time as far back as 1985.
Yeah I know of 90's Trucks having plastic retainers but I had know ideal as far back as mid 80's thanks for that bit of info.
That truck is clean
Good video. Thanks dude
Great work man, hanks for the video.
Thank you so much man you are the man
Did you have a problem with installing replacement u joints ? Where do clips attach?
Nice 👌 works, I used to do that way 2
Is that the 4x4 short drive shaft or the one from transmission to the rear end
Good video, thanks!
Good review for the job and a heads up on the plastic.
Is the main drive shift the same way.
Yes, it is
Nice job
What are those clamps and bolts called
Rookie question here, when you remove the driveshaft does the car go into neutral? meaning that will it roll? My driveway is on an incline...
Yes, the wheels will be free to roll, apply the parking brake or jack the car completely off the ground using 4 Jack stands. But be mindful the wheels will be free to roll especially if you are removing the rear driveshaft so be careful!!!!
@@Bryan916 thank you
Looks like something from Dr Pimple Popper LOL. Thank you for uploading this.
You're welcome
What size socket?
Mine doesn't have any holes in my 2003 GMC Sonoma 4WD.
GREAT VIDEO...!!! WHAT NUMBER IS THE U-JOINT...
Part# 45U0108
Did you lift the Tahoe to remove rear drive shaft or did you just chock the back wheels?
I would advise you lift all 4 wheels off the ground!
So how long did you have that torch on it? I've had mine sitting here for 30 mins and no luck melting that plastic out.
2 mins maybe
Do I replace the plastic retainers?? If so where do I get them
No, You will use metal retainers that come with the new U-joints refer to @10:38
@@Bryan916it doesn’t say what type of ujoints u used
I need help with replacing which u joints to my 03 silverado 1500 5.3 that came with that plastic that I took off. Now I need to know what on earth to put in there cause no local store knows anything.
@ 10:38 I installed a clip
Ah ok. I hope this works for my truck. Thank you
Thanks a million! I just finished it with that part number at oreillys.
liquid cheese???
BS
Great video except my 2004 Yukon had the plastic and C clips on the inside too
That's weird. I wonder if they had been replaced already? Every one I've seen had them exactly like the one in this video.
@@ZBrink11 You're right. I didn't consider that and the clips were obscured by rust and grime. Friend bought it used and didn't know the history of the vehicle. Some plastic did ooze out and I'm not that clever plus I was sidetracked when we first got under the vehicle and the fuel tank strap was missing. We took care of that first.