I was going to get their 20V Max version until I saw that it was not brushless. I needed something small and cordless which could draw water from a bucket since I was displaced by a tornado and had no way to get power or a hose to the place where I needed it. Great to see that there is now a stronger, brushless, alternative even if it requires a bump up to FlexVolt.
Just bought one myself. Its power and convenience make it worth it. The fact that it isn’t too powerful makes it more useful. It won’t deep clean but easy clean ups on different surfaces outside the house went really well on my first use. I used a 6aH battery and there was some room left. Not sure a 12 fits. One really annoying problem is that the quick connect for the hose doesn’t fully seat with one hand easily. The hose popped off on me once when I didn’t notice it wasn’t connected well. My foamer worked better but I only used it on my grill. I’d recommend this if you have the 60v already. I wouldn’t switch battery systems just for this.
I got the 550 Psi one to foam up better than that, i can't wait to get that model. (Chemical guys foam cannon) i know the brand can make a difference, so I thought i would put that in.
The biggest "cool" thing about this is the tip, lets be real it just has a quality tip on it, every cheao ryobi and dewalt for ynder $300 goes like 10x harder with the pro tips.
Did you see DeWalts New DCF860 Impact Driver ? They are Already out in Australia and Sydney Tool did a video on it , thing is Freakin Awesome , its a little bit bigger than the dcf850 but has about 50% more Power ,
@Joethetoolguy ABSOLUTELY 💯 , I went on the Sydney Tool site and they want like $369.00 for it , I don't know what that translates into American money but that's Crazy , I'll wait until it gets here ....
@Joethetoolguy Do you find that the end of the trigger on yours is prone to pinching your fingers? I think mine might be the "pinchiest" trigger on a tool i've ever used - I'm tempted to hit the thing with a bandfile. Also a little dissappointed with the flimsy, gasketless battery compartment door. Otherwise, i've been happy with mine so far. Nice rocketship!
I have one of these on Pre-order that comes with a 6ah charger & 9ah flex-volt battery . I have been debating the last few days if i should cancel my order . I am sure this brushless 60v power washer is made to last longer than other makes & models but the overall size / weight of the gun w/ battery is a bit of a turn off . I was looking at the Worx 710 20 volt power washer that claims 710psi at 1.0 gpm Surprised that Dewalt cheaped out and never made a water tight battery compartment with gasket ...kind of defeats the purpose .
Yeah 👍 disappointed in that but man it’s got legit power and actual quick connects. These things break because people don’t treat them like pressure washers. Use the correct fluid so the cylinder doesn’t seize
That thing wasn’t even brushless… the same issue I have with their little Dyson knock-off. I just got a DeWALT battery adapter for that one and I also get the benefit of being able to empty it without even letting go of the pistol grip. DeWALT’s forces you to separate filters and collection chambers and sprout four arms. Such simple requirements. They really need to ask people why they aren’t buying what DeWALT is selling.
Yeah. I broke the PLASTIC hose attachment the first time I used it. The first one was great for watering plants, cleaning messes my kid made, pissing myself off thinking it would actually work the 10th time I tried it.
I was going to get their 20V Max version until I saw that it was not brushless. I needed something small and cordless which could draw water from a bucket since I was displaced by a tornado and had no way to get power or a hose to the place where I needed it. Great to see that there is now a stronger, brushless, alternative even if it requires a bump up to FlexVolt.
This one slaps bro
I feel like a brushed version would help scrub the dirt😅
I’m in Home Depot right now deciding if I should buy this I wanted to see a couple videos first
Just bought one myself. Its power and convenience make it worth it. The fact that it isn’t too powerful makes it more useful. It won’t deep clean but easy clean ups on different surfaces outside the house went really well on my first use.
I used a 6aH battery and there was some room left. Not sure a 12 fits.
One really annoying problem is that the quick connect for the hose doesn’t fully seat with one hand easily. The hose popped off on me once when I didn’t notice it wasn’t connected well.
My foamer worked better but I only used it on my grill. I’d recommend this if you have the 60v already. I wouldn’t switch battery systems just for this.
The quick connect on mine just keeps leaking then popping right off. I am guessing it is defective as I have tried it a dozen times or more
I got the 550 Psi one to foam up better than that, i can't wait to get that model. (Chemical guys foam cannon) i know the brand can make a difference, so I thought i would put that in.
What’s your secret?
The biggest "cool" thing about this is the tip, lets be real it just has a quality tip on it, every cheao ryobi and dewalt for ynder $300 goes like 10x harder with the pro tips.
Did you see DeWalts New DCF860 Impact Driver ? They are Already out in Australia and Sydney Tool did a video on it , thing is Freakin Awesome , its a little bit bigger than the dcf850 but has about 50% more Power ,
Saw it, looks beastly
@Joethetoolguy ABSOLUTELY 💯 , I went on the Sydney Tool site and they want like $369.00 for it , I don't know what that translates into American money but that's Crazy , I'll wait until it gets here ....
Did you ever get any reasonable amount of foam out of the dewalt soap cannon?
You need to change to the Orifice Nozzle to 1.1mm
@Joethetoolguy Do you find that the end of the trigger on yours is prone to pinching your fingers? I think mine might be the "pinchiest" trigger on a tool i've ever used - I'm tempted to hit the thing with a bandfile. Also a little dissappointed with the flimsy, gasketless battery compartment door. Otherwise, i've been happy with mine so far. Nice rocketship!
Thanks! No I haven’t pinched my finger with the safety yet. Im sure it’ll happen but ill just use gloves then
Ya I actually drew blood on that sucker.
Can you do a video on that 7-9” flex volt grinder 😍
I’ll work on one sure 👍
@@Joethetoolguy perfect thanks!
Commentary had me dyin 😂😂
You can use the 100k psi to fly anywhere you want.
💸
3:18 3:18 @@Joethetoolguy
I have one of these on Pre-order that comes with a 6ah charger & 9ah flex-volt battery .
I have been debating the last few days if i should cancel my order . I am sure this brushless 60v power washer is made to last longer than other makes & models but the overall size / weight of the gun w/ battery is a bit of a turn off .
I was looking at the Worx 710 20 volt power washer that claims 710psi at 1.0 gpm
Surprised that Dewalt cheaped out and never made a water tight battery compartment with gasket ...kind of defeats the purpose .
Yeah 👍 disappointed in that but man it’s got legit power and actual quick connects. These things break because people don’t treat them like pressure washers. Use the correct fluid so the cylinder doesn’t seize
Yah I’ll save my money to piss away on beer!
😂 funny. Thanks for the video
Glad you enjoyed it
An improvement over that last piece of trash they let out on the market
💯
That thing wasn’t even brushless… the same issue I have with their little Dyson knock-off. I just got a DeWALT battery adapter for that one and I also get the benefit of being able to empty it without even letting go of the pistol grip. DeWALT’s forces you to separate filters and collection chambers and sprout four arms.
Such simple requirements. They really need to ask people why they aren’t buying what DeWALT is selling.
Yeah. I broke the PLASTIC hose attachment the first time I used it. The first one was great for watering plants, cleaning messes my kid made, pissing myself off thinking it would actually work the 10th time I tried it.
Spray it with a condum on it.
Will this be good to clean away dirt on stucco?
Seems like it has plenty of power to pull that off
@@Joethetoolguy thanks brotha. Got the machine and I’ll try it out tomorrow
Nice , I had the kobalt 40 v one and I didn't like it, this one looks like it's a better deal
Love the humor 😂
Needs to have a stubby shaft
Thats actually a good idea
@@Joethetoolguy stubby for detailing cars
Nice vid man. New sub here. Is it 12ah batt?
The one in this vid was a 9
how well does this work with pulling from the suction house vs garden hose?
Works excellent using a 5 gallon pale so I would imagine even better with a garden hose. Haven't tried that yet.
Do you use these tools to remodel homes that you flip or on your own home and you're a real estate agent?
Both
Rocket ship. 😂😂😂
🚀
😎⚒️😎⚒️😎
💦
:04 100,000 psi? Are you kidding me? At that pressure this tool would be blown away, check your numbers dude
Rocket ship! 🤦🏻😂😅💥🎉🎊👍🏻🍻
🚀
Nice job being first
Thanks