Can anyone clarify my doubt? In the UE perspective do we see only the time domain data? Is it like one subcarrier is used for one UE? or can UE use more than one subcarrier (in that case would not UE get more than one PRB at the 0.5ms slot?)?
why sub carrier is 12 only but not any other value ? i found so many video and document saying RB=12*15khz= 180 khz but no where give reason why sub carrier is 12 only ?
Hi Saurabh, Thanks for sharing the qualitative info. I just have a question. If we have only 6 PRB in 1.4 MHz freq. and Enb assign 2 RB to each user then it can support only 3 users simultaneously. Please elaborate Thanks in advance
Nice video, one question why there is a concept of slots than if minimum scheduling part is one scheduling block or two RB's why we made slots what is the use of slots...i hope u understand my question
Amazing video, this video always helps me to recall the topics in a short time.
Good work
Well explained, please make more videos on LTE
Can anyone clarify my doubt? In the UE perspective do we see only the time domain data? Is it like one subcarrier is used for one UE? or can UE use more than one subcarrier (in that case would not UE get more than one PRB at the 0.5ms slot?)?
Its very help full
Thanks Sir.. Nice explain..!!
Good explanation Pandey..
thanks a lot man, you made it look way too easy.
how many resource elemnt for 2 transmit antenna ?
Should not be 1 Scheduling Block have 168 REs, instead of 164 ?
How these PRBs are distributed amongst differennt cells
Pls share video for LTE attached requeste /power on procedure/ Rach
why sub carrier is 12 only but not any other value ?
i found so many video and document saying RB=12*15khz= 180 khz but no where give reason why sub carrier is 12 only ?
As per LTE guidelines minimum 6RB required for camp on LTE network
Sir high PRB utilization kya hota hai? Drive test karte waqt iske karan throughput less ata hai
Hi Saurabh,
Thanks for sharing the qualitative info. I just have a question.
If we have only 6 PRB in 1.4 MHz freq. and Enb assign 2 RB to each user then it can support only 3 users simultaneously. Please elaborate
Thanks in advance
@sanwork knowledge ??
Could you tell, how many REs are used for transmitting user data in one PRB?
84 Resource Element times 2 = 168 resource resource element. From where 164 come?
Nice video, one question why there is a concept of slots than if minimum scheduling part is one scheduling block or two RB's why we made slots what is the use of slots...i hope u understand my question
Thanks Sir for such videos.
Please upload lecture on LTE RANK AND TRANSMISSION MODE concept.
Ok , I will post a video soon.
2RB=1SCHEDULING BLOCK=168 RE
Dear sir,
If any one ask for Prb Definition ,than how can i tell him in one line concept.
Sir aap kaha chle gye appka vedio nhi aa raha hai
Please share frame n slot synchronization process in ue
84*2=168 RE not 164 as mentioned in video
Hi.. I am still unable to understand how 2 RBs.. Csn u explain further.
1 RB = 12 Subcarrier x 7 OFDM Symbol = 84 RE
1 Scheduling Block = 2 RB = 2 x 84 RE = 168 RE
We can allocate at least 1 subframe I.e. 2 RB
Bacho wali cheeze to samajh le
Why u stopped making such knowledgeable and helping video
Hello, I will upload more videos soon.
Sir plz make more video
Hi sir, pls make an video on BLER, SINR and TIMESLOTS with PRB which will main role play in throughput in LTE & co-relate.
sure , i will post video on this topic.
Please make for same as 5G
sir can u share that ppt
sir...
LTE kpi per ak video sir plz.... and frequency per...
Sir
Ak video LTE KPI or Channel per digiye... Sir
sure , i will post video on LTE KPI.
Sanwork Knowledge
Ok sir je
I am waiting.......
+Sanwork Knowledge
sir,
I am waiting your video on LTE And 3G KPI .......
Plz explain fig. Second properly...
Another topic
One mistake 84*2 makes 168 not 164 please correct it.
Speak english man