We use Fusion 360 which we have a video on here: ua-cam.com/video/cJkZOf97xIg/v-deo.html and here's a workflow to go from a drawing to a CNC cut: ua-cam.com/video/2_yL3rmU7iE/v-deo.html
Hello, can you help me, I have a fyeboon like plasma, it cuts well in manual, but when I put it in automatic to make the design, it lowers the nozzle, turns it on, makes a hole for a few seconds and turns off. I can't get her to do the drawing, but when I do the test she does the drawing test correctly. Can you help me or give me the machine manual.
$8000 includes the plasma torch. Other brands in 4x4 are $6000 up to $12000 and do not include the plasma torch. It is competitively priced. Only table with a 90 day return policy. All others are "Not Returnable". Eastwood is an established and stable company, you know you will get support when you need it; too many others are new start ups and are importing units or are made in someone's garage and are using proprietary parts and software which means you may own an orphan machine when you need help.
THC is awesome
Which software do you use to make custom designs
We use Fusion 360 which we have a video on here: ua-cam.com/video/cJkZOf97xIg/v-deo.html
and here's a workflow to go from a drawing to a CNC cut: ua-cam.com/video/2_yL3rmU7iE/v-deo.html
Is it possible to reset the machine to factory settings
My THC dives down very close to the material after piercing almost crashing, any idea what parameters I could change to solve this
Our engineer advised: Adjust arc voltage up, should raise it
Hello, can you help me, I have a fyeboon like plasma, it cuts well in manual, but when I put it in automatic to make the design, it lowers the nozzle, turns it on, makes a hole for a few seconds and turns off. I can't get her to do the drawing, but when I do the test she does the drawing test correctly. Can you help me or give me the machine manual.
Sounds like you're not on an Eastwood Plasma table - you're going to need to reach out to the manufacturer for this type of trouble shooting.
When I tick “watch arc enable” CNC plasma starts to cut but dont freezes on the same place and flaming. What it could be?
Are you using an Eastwood CNC Table?
No, its Chinese FangLing F2100
Sorry we're unfamiliar with that unit.
My torch is bouncing up and down after some time when cutting long flanges on a 16mm plate
Disable the auto height control
Thought this was a video on herb!
Good day. I was cutting 10mm steel plate with my plasma and suddenly i saw x limit on the controller and the machine stopped. What should i do. Thanks
Email us a picture of the error to ncornell@eastwood.com
No sale los huecos redondos
there is a link to the software or firmware please
If you mean the Versa Cut 4x4 table you can find the updates here: www.eastwood.com/eastwood-versa-cut-4x4-cnc-plasma-table.html
Para cortar plancha de 12 milímetros g parámetros pongo
Reach out to our customer service department and they'll get it straightened out for you.
En español para aprender
Trsducelo con el mismo youtube
8 grand ??????????????????
$8000 includes the plasma torch. Other brands in 4x4 are $6000 up to $12000 and do not include the plasma torch. It is competitively priced. Only table with a 90 day return policy. All others are "Not Returnable". Eastwood is an established and stable company, you know you will get support when you need it; too many others are new start ups and are importing units or are made in someone's garage and are using proprietary parts and software which means you may own an orphan machine when you need help.