DIY Repair: Ryobi Electric Pressure Washer Fix!
Вставка
- Опубліковано 7 тра 2024
- This is how I fixed a 2300psi 1.2gpm Ryobi electric pressure washer that would turn on but would not build any pressure what so ever. These are the steps I took to fix the unit and get it up and running again.
Thank You!!! I have same model -- just tried your recommendation and it works. For others: don't give up... I had to add more CLR to the soap dispenser and continue to run the washer. After about 3 to 5 minutes, it started spitting and eventually back to the strong power wash.
Will try your method again. P.S. I just add it in the water garden hose port (water go in) and seal the other side with balloon, and let it sit overnight, and it did not work.
Doing this tomorrow!!! I hope it works! I already cut off the GFCI plug and it’s blowing breakers when it plugged in.
@lifehappens168 did you find a fix for this issue? Having same problem. Blowing breaker and neither the gfci cord or gfci outlet are set off.
Thanks for posting.
Will try this I have the same issue with the same model
good luck.
Nice.
This worked after I gave the pump a couple of light taps with a small dead blow. Left the CLR in overnight.
what do you mean dead blow? Thanks
@@yuyuzhao96A dead blow hammer. It has a soft face.
I’m looking at one now for a friend, same symptom
Wondering if I should pull the pump and check the springs and check valves
I took one apart years ago and vaguely recall small springs and nylon discs/ plungers
They may all be oxidized with hard water and siezed up
CLR is worth a try along with 60 # h2o # behind it later on
for sure worth a shot.
I have the same problem on the same model and I worked the same way , but didn’t solve my problem and still has no pressure . Is there any other solution?
pump internals might be bad. other than taking it apart not much. probably just need a new one. most stuff is junk now and disposable sadly.
Where can I find that filter I have the same one but seems the filter is missing
you may be able to buy one from ryobi. if not you can just add a universal one to the hose you're using.
I turn mine on and it doesn't do anything the power button is on the light is on any idea I bought it last year and I haven't used it
Have you tried test switch/button? When you press the test button, you should hear a click sound.