How to update TBS tango 2 Firmware ?
Вставка
- Опубліковано 3 жов 2024
- In This video I am going to show How to update TBS tango 2 Firmware ?
Upgrading TBS Tango 2 firmware is very easy you need tbs agent X app to connect to computer and then download the latest firmware and update it.
It should be mentioned after you update, you have to calibrate your sticks on the controller or they won't work. Hope this saves someone the hassle. :)
Omg,ur video help me a lot,thnk you very much sir..
Thanks 🙏
Your videos are very informative and put together very well. I've been trying to convert my GEPRC Mark3 to bind to a TBS Nano receiver but failed to do so. I tried the UART6 and even the SBUS but nothing seems to work. If you have any experience in this area, I would appreciate your response. Either case, keep producing videos. Its great to a new FPV hobbiest like myself.
Try these steps
Step 1- You need to connect ch1 to rx6 and ch2 to tx6, any gnd and +ve
Step2 - bind ur radio
Step 3 - enable uart6 serial Rx in BetaFlight and disable everything in that row
Step 4 - in the configuration tab inside receiver block, second dropdown select CRSF and enable telemetry and press save
Step 5- check in receive tab if radio stick moment shows, if not try different channel map from dropdown
I hope this should solve it, even after that it does not work. We can come chat over skype.
@@FPVWhoop Thank you for your advice. I tried exactly what you said and I have no stick movement response. I'm guessing that I have a bad TBS Micro. I ordered a few of TBS Nanos and will try again. This is so frustrating because I have 2 GEPRC Mark3 drones. I love the way they fly. I successfully connected a TBS Nano to my iFlight Nazgul. Used my TBS Tango 2 for the first time yesterday to fly it. Not a very good experience. Very twitchy, too sensitive. Had to go back to Angle mode. If the wind dies down today, I'll try again. Thanks again for your help. I subscribed to you channel. Keep up with making videos. God's speed!
Where u able to bind it to radio ?? Try this command also after setting everything “set serialrx_inverted = OFF”
@@FPVWhoop Unsuccessful at binding but will try your idea tomorrow. Thanks
Try to bind first, let connect over insta of FB my insta is @fvpwhoop
Thanks 👍🏻👍🏻👍🏻👍🏻
my computer is not recognizing my tango 2 , why is that?? it does give me the three options when i connect the usb c but once i choose joystick it doesn't recognize it. is it cuz im using a usb c cable that came with my wireless headphones for charging them
Could be, as some charging usbc wires only have power wires dont have data wires. Try some other wire which came with android phone or dji goggle
@@FPVWhoop yup it was the cable, thanks