Good video Sir. The singles were obviously made to tap into the market that the doubles don't work on. So sure, if you buy the singles to use on a Fast Feed, you're going to be disappointed. You just need to look at the screw placements on the clipper blades to work out which ones you need. Andis just wanted to cover all clippers with purple :-)
Thanks for this video I bought a set with the double magnet never knew they made a single magnet. Works perfect just like you said with my andis clippers. Good looking
Can’t compare them from the sides cause the outter teeth are to hold the gaurds on the clippers. The thickness of that don’t matter. You have to compare the inner teeth thickness to see if there the same size. But I’m still gone order some singles magnets gaurds.
I was laughing when you mentioned the doubles to be hard to find in some places. I just ordered a Fast Feed and tried to get my hands on a set of those double guards. I ended up on ebay paying roughly 50 euros ($60) to a shop in California to get them shipped and through customs here in Germany, and that was the cheapest one available :-)
This is the best video about all andis guards... I m sad because i like more the double magnetic and if I understand correct, I have a us pro li and for better fit I must take the one magnet guards because the double magnet don’t fit well, right?
The Grey Gards that are for the model LCL, or aac-1 they fit on the andis master? Because I get the guards 1/2 and 1 1/2 for the model that I mentioned, but the guy told me that those are same for the master and works ok, is true?
Just another question man. I find that the open lever doesnt blend very well into the 0 guard which is a 0.5 on a Wahl clipper. The 1.5mm on the wahl guards seen to cut alot closer. Could this be true? Other than that i gave them clippers another chance and im so glad i bought them.
That is possibly true. Some hair textures don’t blend well into the 0 guard. The reason the Wahls cut closer is because of the surgical blade. The surgical blade open is shorter than the Envy blade open. In turn, that would make all of the Wahl guards seem shorter than the Andis guards. I hope this helps and that you understand this.
I just bought the envy li and I live them with. grey gaurds which I just bought the single mag today buy I also use my majic clip 1.5 clip to blend with the two
Bro I'm thinking about becoming a barber, i want to start and practice first, how many clippers do i need and which clippers do you recommend for beginners?
+Ralph Lauren that is a very simple question that requires a complex answer. I'm gonna do a live stream this weekend. Ask me that question in the live stream because it's too long to reply in comments.
I need some advice. I have the us pro li's and the standard guards that come with it are WAYYYYY too sharpe! Are the single magnetics just as shape? No chance im usuing them on a clients head..
Two things can happen with the single magnetic guards. They will either dull out over time, or you will adjust to them. In my case, I did adjust to them, and they broke in because I left them In barbicide way too long. I actually no longer use them because I fade with blades now.
+Guerilla Wright I recommend the single magnetics Andis guards, or if the speedo guards would work, try those. The problem with the singles, is that the two guard is trash compared to the double magnetics.
+Guerilla Wright just beware that certain hair types and the way the hair projects from the scalp can be difficult for the number 2 single magnetic guard. That's why I prefer the double magnetic two guard because it has more teeth which allows you to pick up the hair easier.
Problem is you cant use DOUBLES with Andis USPRO LI/ENVY LI , and Singles are not that great, so you end up with Grey ones and most people are complaining abt grey ones not taking lines out with nr 0 guard?
+Run Beast the singles work out good for me. You have to learn how to use them. My 0 guard works fine for me. If you really give them a chance, you will like them.
MMA BARBER LIFE they not fitting the fast feeds. They very loose. I dont get it. When im in the shop tomorrow ide love to send you a video to show you and see what you reccommend
I HATE TH SINGLE MAGS.... THE DOUBLES ARE BETTER... BUT YOU HAVE TO REMEMBER THAT THE SINGLES WERE DESIGNED TO FIT WAHL TOO THAT'S WHY THEY ARE BIGGER... FOR ME, WHEN I USE WAHL I USE WAHL GUARDS AND THE SAME WHEN I USE THE ANDIS MASTERS OR FAST FEEDS I USE THE DOUBLE MAGS... IN THE END IT'S ALL ABOUT WHAT WORKS FOR YOU...
My opinion is a bit bias because I have Andis everything. I would say get the Envy’s. I love them and you can watch my tutorials and see my work with them.
Yea! It’s ironic that you commented. Because I was thinking yesterday that they should have made the same mold of the double magnetic guard, only with a single magnet. Glad I don’t use guards a lot.
I hate those guards it wasn’t cutting hair so I switched back to the double magnetic guard and it fixed the problem I threw away the single magnetic guards they are trash cheaply made
lol... "a decade, I might be off a few years"... the Masters have been around since 1931... Good info on the guards tho!
+Swizzlecuts I was waiting for the person to correct me. I meant to say decade. It's good that you actually listened to the video.
@@IDOITTRAVELS I think you meant century? Lol
Yeah, I got my first pair in 1995
The single magnet guards work GREAT on the Wahl clippers too.
I didn't know that. I only use Andis Clippers. I'll pass that one to my fellow barber bros. thx
Good video Sir. The singles were obviously made to tap into the market that the doubles don't work on. So sure, if you buy the singles to use on a Fast Feed, you're going to be disappointed. You just need to look at the screw placements on the clipper blades to work out which ones you need. Andis just wanted to cover all clippers with purple :-)
My "SINGLES" Fit on My Fast Feeds Perfectly, What the Hell are you Talking about!?
Tbh Best Guards video ever👏💯
So happy I stumbled across ur channel bro love to learn new things great video 🙏
Thanks for this video I bought a set with the double magnet never knew they made a single magnet. Works perfect just like you said with my andis clippers. Good looking
Glad it could help!
I use the single magnets with the zr2 with the 000 blade. I don’t got all the blades yet 🤷🏾♂️
Can’t compare them from the sides cause the outter teeth are to hold the gaurds on the clippers. The thickness of that don’t matter. You have to compare the inner teeth thickness to see if there the same size. But I’m still gone order some singles magnets gaurds.
What if you were able to find flat screws for the envy li? would the double magnetic guard fit?
I was laughing when you mentioned the doubles to be hard to find in some places. I just ordered a Fast Feed and tried to get my hands on a set of those double guards. I ended up on ebay paying roughly 50 euros ($60) to a shop in California to get them shipped and through customs here in Germany, and that was the cheapest one available :-)
just the video I was looking for 💯
This is the best video about all andis guards... I m sad because i like more the double magnetic and if I understand correct, I have a us pro li and for better fit I must take the one magnet guards because the double magnet don’t fit well, right?
Yup! You can hack the doubles to fit the us pro’s, but it’s a lot of work.
MMA BARBER LIFE ok bro. Except I must work more gently because are more scratchy the plastic. The one magnet it fit 100% with no moving when I fade?
The Grey Gards that are for the model LCL, or aac-1 they fit on the andis master? Because I get the guards 1/2 and 1 1/2 for the model that I mentioned, but the guy told me that those are same for the master and works ok, is true?
Great info!! What other guards work well with the Andis Masters??? Do Oster universal guards???? I know speed o guides are good.
Stick with the double magnetic guards, or speedo guards. I haven’t tried the new premium guards that Andis came out with recently.
Thanks a lot!!
Just another question man. I find that the open lever doesnt blend very well into the 0 guard which is a 0.5 on a Wahl clipper. The 1.5mm on the wahl guards seen to cut alot closer. Could this be true? Other than that i gave them clippers another chance and im so glad i bought them.
That is possibly true. Some hair textures don’t blend well into the 0 guard. The reason the Wahls cut closer is because of the surgical blade. The surgical blade open is shorter than the Envy blade open. In turn, that would make all of the Wahl guards seem shorter than the Andis guards. I hope this helps and that you understand this.
Did you get the half and one and half magnetic guards yet ? Both single and double.
Only the singles. You don’t need the half and 1.5 in double magnetics.
I just bought the envy li and I live them with. grey gaurds which I just bought the single mag today buy I also use my majic clip 1.5 clip to blend with the two
love with them
I'm glad that you love em. I love mine as well. Those single mags can work if you use them properly.
Bro I'm thinking about becoming a barber, i want to start and practice first, how many clippers do i need and which clippers do you recommend for beginners?
+Ralph Lauren that is a very simple question that requires a complex answer. I'm gonna do a live stream this weekend. Ask me that question in the live stream because it's too long to reply in comments.
Which guards do u use for your envy fade blade tried watching ur video for awhile tryna understand.
I use the Wahl premium guards or the Andis single magnetic guards. Of course I have the Wahl fade blade on mine.
Where can I get the andis double magnetic guards? I’ve been looking everywhere and can’t find any that are not outrageously priced. Thanks
Sorry, but idk. I see them out of stock most places online. Maybe you can try a local supply store.
I need some advice. I have the us pro li's and the standard guards that come with it are WAYYYYY too sharpe! Are the single magnetics just as shape? No chance im usuing them on a clients head..
Two things can happen with the single magnetic guards. They will either dull out over time, or you will adjust to them. In my case, I did adjust to them, and they broke in because I left them In barbicide way too long. I actually no longer use them because I fade with blades now.
MMA BARBER LIFE cheers bro. Been using the alot today and im not stabbing any clients like i thought they would do!
I have the single magnet guards. Are they fit in andis fade master as well as the envi li?
yessir!
What clipper guard would you recommend for the Andis Envy. I don't like the gray ones that came with it
+Guerilla Wright I recommend the single magnetics Andis guards, or if the speedo guards would work, try those. The problem with the singles, is that the two guard is trash compared to the double magnetics.
MMA BARBER LIFE Thanx! I think I'll give the single ones a try. Really don't know about the Speedo guards
+Guerilla Wright just beware that certain hair types and the way the hair projects from the scalp can be difficult for the number 2 single magnetic guard. That's why I prefer the double magnetic two guard because it has more teeth which allows you to pick up the hair easier.
Replace the screws at a hard ware store so they are flush and you can use the double magnets 😇💫🙌🏽🙌🏽 you taught me a lot tho thanks man #NoviceBarber
I just learned something myself if that screw idea works. Thanks for the tip! Too bad I don’t use guards anymore. I fade with blades.
Masters been around I believe the 60s. They have changed since then
Problem is you cant use DOUBLES with Andis USPRO LI/ENVY LI , and Singles are not that great, so you end up with Grey ones and most people are complaining abt grey ones not taking lines out with nr 0 guard?
+Run Beast the singles work out good for me. You have to learn how to use them. My 0 guard works fine for me. If you really give them a chance, you will like them.
MMA BARBER LIFE thanks man , do you think 0 gappingg is bad for your clippers or the blade ?
+Run Beast NOPE! Especially if you do it properly.
Run Beast the fade master guards are simple or double magnetic?
My single Magnetic 1 guard slips on my Andis Masters.
As always Good stuff buddy!!
great video and good advice! 👏🏾👍🏾🙏🏾🔝🔥
Thanks guys did not know work on whals
what about the new premium andis guards
Haven’t used them yet. I hear they’re good
Thanks for this video
Can I use these on my andis envy
+alexzy costello which guards?
I have the andis clipper set that came with the outliner that most barbers use
+alexzy costello the single magnetic guards work with the envy clippers. Don't waste your time trying the double magnetic guards.
Thanks
I bought double magnetic guards and they dont fit on my oster fast feeds or my andis envys. Can you help me out?
They should fit the fast feeds, but not the Envy’s.
MMA BARBER LIFE they not fitting the fast feeds. They very loose. I dont get it. When im in the shop tomorrow ide love to send you a video to show you and see what you reccommend
Dm me on ig.
MMA BARBER LIFE ok bud ill do that later this morning,, thanks for getting back to me so fast cause im about to return these things
I just bought the double magnetics and they don’t fit the envys did you find a fix
buy envy fade blade and youll see the diff in the cut
I HATE TH SINGLE MAGS.... THE DOUBLES ARE BETTER... BUT YOU HAVE TO REMEMBER THAT THE SINGLES WERE DESIGNED TO FIT WAHL TOO THAT'S WHY THEY ARE BIGGER... FOR ME, WHEN I USE WAHL I USE WAHL GUARDS AND THE SAME WHEN I USE THE ANDIS MASTERS OR FAST FEEDS I USE THE DOUBLE MAGS... IN THE END IT'S ALL ABOUT WHAT WORKS FOR YOU...
Damn for single magnet and double you got the old zeros
Magic Clip Cordless or Envy Li Cordless?? help me
My opinion is a bit bias because I have Andis everything. I would say get the Envy’s. I love them and you can watch my tutorials and see my work with them.
MMA BARBER LIFE if you said, I'm going to get it bro
Nice! Repetition will build speed and understand your system and the guards or blades you use.
@@pauledward4841 & you can use the wahl blades on the andis envy li
I really don’t understand why andis didn’t do the same just different 1 and 2 megnet single megnet is look cheap and both it’s the same price!!
Yea! It’s ironic that you commented. Because I was thinking yesterday that they should have made the same mold of the double magnetic guard, only with a single magnet. Glad I don’t use guards a lot.
Ok. Let me know how he likes it.
I hate those guards it wasn’t cutting hair so I switched back to the double magnetic guard and it fixed the problem I threw away the single magnetic guards they are trash cheaply made
Way longer than 10 years
I meant to say century lol