As a female that has been cutting her own hair for a number of years I found these clippers as you would say, feeling good to the hand. I just want to have more knowledge about the cutting game for myself so thank you!!!
Just ordered my Cordless Envy and thinking about getting this blade as well. By the prices of the blades, might as well buy the Fade clippers to use the blade and still have a power coded clippers as a backup. It’s only a few more dollars more 🤷🏽♂️
I changed the blade and its great. Thanks for the video. Put the blade it came with on my andis camo clippers. Cordless is so much better and they are nice and light.
I go back and forth with the fade blade and the taper blade on the envy I end up just putting the taper blade back on it because if u have the Andis fade master you will never pick this machine up!!! But with the taper blade to me it's More valuable especially if you like to fade using the Andis guard system vs. using the Magic Clip and the wahl system.
I have a question with zero Gap in do you do you have to open up the blade a lil every time you put a new guard on and the Andis t outliner when seting the blade do u hold it down and tighting it till u cant no more
Good video say do happen to know where I can get a replacement battery for these.My battery needs to be replaced and having trouble finding it...Thanks ahead..
marcello kendall I don't know where to get the battery I'm sure Andis will replace it if you contact them . If not just type in replacement battery and Clipper name in the search bar on eBay and go from there . Hope that helps , I appreciate you watching my video hope you decide to stick around 🙌🙏
Ant The Barber was just watching one of youre tutorials and I've searched eBay,google etc.But no luck..I guess I'll eventually will and thanks for the quick response and just subbed to you're channel bring some haircut tutorials... Barberlove
marcello kendall I'm uploading one right now with a full voice over and walk through buts it's a 4k video so I still have about 2 hrs and 35 mins until it uploads all the way lol . I appreciate the support alot , when I can I'll do a quick search for the replacement .
Thanks bro for the info, so do they cut good I’m ordering them off eBay and the signal guards I will order then, do you think they’ll fit Andis Alloy clipper to you know
Kester Ugo tons of videos on UA-cam how to set blade , I like to leave a few hair strands length between the cutting blade and steal blade . Some people like to zero gap completely but I like to play the safe side and go with a few strands ... hope that helps .
this would've been so nice if you could've did a comparison cut or at least cut some hair to let us see how it performs ugh....🤦🤦🤦but oh well🤷.....i did the exact same modification on a Walmart clipper!!! I switched it up and the fade blade is cool for smoothing Afros and stuff but the fades didn't do so well
@@pimpmyride7278 just cheap feeling so I didn't really give them a chance , you might actually like them . It's all preference at the end of the day ... if you try them out let me know what you think 😊🙏🏽
Dizzy Roth the difference is one is a fade blade , and one is a taper blade . The fade blade makes it easier on skin fades or low fades in general ... but if zero gaped to close it can pull on the clients skin . The taper blade can do the same but with more work on the bald line . Hope that helps
Dope video! Was thinking of copping a Envy Li. I currently have a Andis 00000 blade on my oster classic 76. Do you know if I can throw that blade onbthe Envy? Thanks in advance
Ant The Barber yeah Im pretry sure that that the ceramic side won't fit cause of the detachable blade notch on the clipper side. But looks like the hole location on the bottom blade side looks identical. Gonna try it once I get them. Thanks again!
Hey bro whats up! Hey man I zero gapped my Envy Li and accidentally loosened the screws too much to where the blade fell off. I went to put everything back and noticed ever since the sound on the clipper has changed it sounds a lot louder, seems like its lost tension. I can't find a way to adjust that. Any help or tips are appreciated.
@@arnoldvillatoro3284 any cordless wahl , the magic clip , metal magic clip or senior 👌🏽 the babyliss fx is cool but not as versatile as wahl ... not yet .
Hi there, just a quick question. I have this clipper with the fade blade on but i find that the open lever doesnt bkend into the 0 guard very well. Nor does the 1 open bkend into the 2 at all. Been a life long wahl user and i just cant get my head around why the upgraded guards still dont blend? Any tips? Thanks in advance.
Lewis Edmondson I'm honestly a Wahl guy too , I noticed with the single guards the struggle with blending as well . Haven't set my magic clips down since .
Big Lew they have a new version single mags andis came out with and they blend together beautifully now! You can go Sally’s and pick them up I did a review on them and they are dope imo
Christopher Diaz once you have the blade set to where you want hold it in place and begin to tighten the screws a lil at a time switching back in forth so they stay in place where you want .
Yeah i have the same question as well. Seems like its discontinued or something. They have andis fade master replacement blade which the screw holes are different from the andis envy li blades
Question bro. Do you think there's a way this Clipper could use Oster blades? I have a pair of fast feeds which I love, and i just was wondering if you could swap them. From Fast Feeds to the Envy Li Thx 🙏
honestly i have both except i have the cordless envy li nation and i put a and is pro alloy fade blade on it and it out performs my magic clip its all a preference and hype imo and i got the new guards with my li nation which are the same as the double magnetic except with out the magic they a are just snap on and they are light years different from the original envy li guards and they came with a half and a 11/2 guard!! and I'm going to be honest with you my wahl cordless sterling 4 are killing my magic clip! i put a two hole slide on my sterling 4 and a fade blade and they feel like the new cordless senior
buckwitme1 so I bought the magic clips and premium guards, zero gapped then. I LOVE being cordless and they cut quickly through thick hair, BUT.... I’ve notice they don’t blend between open/close like my masters! So idk I’m slightly bummed I don’t have time to be using every machine on a haircut lol. Time is Money. Open for any other advice or pointers TY for responding although I already bought the magic clips, I feel like I should have went Li - T
yea the magic clip have a shorter blade than andis! and the guard system is what i don't like about the magic clip! the li blend very well imo my suggestion would be for you to put a taper blade on magic clip and see if it blends better which i think it does because the fade blade can leave a hard line and takes more to blend out between open and closed so try going to get a taper blade at beauty supply store near ya and see if that makes a difference but which I'm sure that what your issue is
I don't have a set of dual magnetic guards, but just by looking at the guards, I would start by Popping out the 2 magnets. I would then place one magnet in the middle of the guard and trace it ( of course, using an original single magnet guard as a guide ) cut the whole in the guard, put the magnet in the guards new magnet hole. Grab an old broken, same kind of guard and hold it above your new single magnet guard and light it on fire. Be careful and when the guard starts to melt, let couple of drops fall on the magnet. It'll make the molding when it cools. Use same material kind of guard so it could bond and it won't add weight. Use a blade or sand paper to make it look pretty. U can use other stuff to hold the magnet but it can get heavier. Again, this is just by looking at it. I don't have a dual magnet guard. And yes, I've done stuff like this...
Why we spent a lot money for it then we must replace blade?? Andis manufacturer is suck or what? Engineering is damned on design but why we choose this brand?? People are crazy.
As a female that has been cutting her own hair for a number of years I found these clippers as you would say, feeling good to the hand. I just want to have more knowledge about the cutting game for myself so thank you!!!
😊🙏🏽
Just ordered my Cordless Envy and thinking about getting this blade as well. By the prices of the blades, might as well buy the Fade clippers to use the blade and still have a power coded clippers as a backup. It’s only a few more dollars more 🤷🏽♂️
I changed the blade and its great. Thanks for the video. Put the blade it came with on my andis camo clippers. Cordless is so much better and they are nice and light.
Dope , thanks for watching the video and the feedback 🙏🏼
I go back and forth with the fade blade and the taper blade on the envy I end up just putting the taper blade back on it because if u have the Andis fade master you will never pick this machine up!!! But with the taper blade to me it's More valuable especially if you like to fade using the Andis guard system vs. using the Magic Clip and the wahl system.
Great video
Thank you ✊🏽🙏🏽
Can you put links to buy the single magnet and the extra fade blade
I have a question with zero Gap in do you do you have to open up the blade a lil every time you put a new guard on and the Andis t outliner when seting the blade do u hold it down and tighting it till u cant no more
Good video say do happen to know where I can get a replacement battery for these.My battery needs to be replaced and having trouble finding it...Thanks ahead..
marcello kendall I don't know where to get the battery I'm sure Andis will replace it if you contact them . If not just type in replacement battery and Clipper name in the search bar on eBay and go from there . Hope that helps , I appreciate you watching my video hope you decide to stick around 🙌🙏
Ant The Barber was just watching one of youre tutorials and I've searched eBay,google etc.But no luck..I guess I'll eventually will and thanks for the quick response and just subbed to you're channel bring some haircut tutorials... Barberlove
marcello kendall I'm uploading one right now with a full voice over and walk through buts it's a 4k video so I still have about 2 hrs and 35 mins until it uploads all the way lol . I appreciate the support alot , when I can I'll do a quick search for the replacement .
If the black piece wat hold the second blade pop off, do I have to take the clippers apart to put it back on?
Would you rather have this or the Wahl magic ??
Malik 123 wahl magic clip all day .
@@AntTheBarber andis envy with whal blades or magic clipper ?
Can i change the blade so i can use the double magnet instead instead?
Nope or I would of 🙏🏽
Thank for the info”..but can the magnetic guard fit the original clipper blade that came with the clipper..
D. Howse yes , just single magnetic guards .
Thanks bro for the info, so do they cut good I’m ordering them off eBay and the signal guards I will order then, do you think they’ll fit Andis Alloy clipper to you know
Where did u get that fade blade at
eBay I believe
Where can I get this blade I've looked everywhere
I believe Amazon carries it
the original blade on the envy the same as the master original blade....?
Daniel Aguirre no its different
Daniel Aguirre the Andis Master original blade wouldn't fit this Envy clipper unfortunately .
thank you for the quick response but are the fade blade and original blade from the masters cut similar to the envy fade blade and taper blade....?
Daniel Aguirre no the Fade Blade cuts different than the Master and original Envy blade . The original Envy blade cuts just like any Taper blade .
Will the guards this clipper comes with fit with this new blade on there ?
Yes
Please boss any tips for beginner in Blade sitting
Kester Ugo tons of videos on UA-cam how to set blade , I like to leave a few hair strands length between the cutting blade and steal blade . Some people like to zero gap completely but I like to play the safe side and go with a few strands ... hope that helps .
OK boss pls make it simpler for a beginner like me.... Thanks alot
so can you tell me how to do it with the Wahl cordless magic clips
Christopher Diaz I have a video on it bro , go watch it and it will walk you through🙏
Do you need to change the blades that come in the box ?
I needed to cause I didn’t like the other blade so it’s totally up to your preference 👌🏽
this would've been so nice if you could've did a comparison cut or at least cut some hair to let us see how it performs ugh....🤦🤦🤦but oh well🤷.....i did the exact same modification on a Walmart clipper!!! I switched it up and the fade blade is cool for smoothing Afros and stuff but the fades didn't do so well
Elite Mentality I have more videos doing cuts .
This was just an unboxing and first hand feel review.
Why don’t people use the guards in the box? Is something wrong with them??
I didn't like them .
Ant The Barber can I get an explanation? What about them??
@@pimpmyride7278 just cheap feeling so I didn't really give them a chance , you might actually like them . It's all preference at the end of the day ... if you try them out let me know what you think 😊🙏🏽
What’s the fade replacement blade for? Is there sum out there like a triple 0 guard for bald skin fade?
I use this clipper for skin fades so I rock a fade blade on it , not the taper blade . In my opinion it works better this way .
Awwreddy, but does it cut to the skin? I use these clippers but I have to backdoor & use a razor to shave.
Dope video I'm thinking about swapping blades on my Envy's but I'm not familiar with the differences in cutting since I'm not a barber and advice?
Dizzy Roth the difference is one is a fade blade , and one is a taper blade . The fade blade makes it easier on skin fades or low fades in general ... but if zero gaped to close it can pull on the clients skin . The taper blade can do the same but with more work on the bald line . Hope that helps
Que tal una pregunta que opinas de las peinetas 1/2 y 11/2 al cambiarle esta cuchilla
Gran carlo Chambi no Spanish sorry
Do the envy’s use the same charging cord as the foil shavers?
Not sure but looks like it
Thanks
Seems like they did actually know what they were doin with the single magnet🤔 Dope Video✌🏼
I've had my andis pro li clippers around 3 days now and the charging light doesnt work anymore can anyone help
Not sure what that could be , take the back 🤷🏽♂️
Dope video! Was thinking of copping a Envy Li. I currently have a Andis 00000 blade on my oster classic 76. Do you know if I can throw that blade onbthe Envy? Thanks in advance
BRANONE415 I'm not sure about that one , I also tried the andis ceramic blade and it didn't fit so it's hit and miss .
Ant The Barber yeah Im pretry sure that that the ceramic side won't fit cause of the detachable blade notch on the clipper side. But looks like the hole location on the bottom blade side looks identical. Gonna try it once I get them. Thanks again!
BRANONE415 can you let me know when you do ? I wanna know if it fits too now 🙌
Lost my charger were can i buy another one
I'm sure eBay or Amazon 🙏🏽
Hope santa comes home hella early and gets me these. 😂💀
which diffrent beetween usproli 2019 vs envyli version>?
do u do the same thing with the magic Cordless Clipper
Christopher Diaz those come a fade blade . I use the 1mm-3mm 2-Hole blade in the magic clips
do you have to hold it down how you're holding the blade down on this one
Christopher Diaz no it's nothing like that at all .
Im missing the drive assembly so the blades can sit on where can i get it
@@shinobi6r the flower ?
@@AntTheBarber oh ok thanks
You know which one I should buy for the andis envy clippers
Does this blade cut near 00000 when zero gapped ?
I never used the 00000 blade but yes it basically cuts down to a little past stubble if that makes since , almost skin .
Ant The Barber thank you for the reply, so these would be great for balding out?
Hey bro whats up! Hey man I zero gapped my Envy Li and accidentally loosened the screws too much to where the blade fell off. I went to put everything back and noticed ever since the sound on the clipper has changed it sounds a lot louder, seems like its lost tension. I can't find a way to adjust that. Any help or tips are appreciated.
I'm not sure what happened 🤔
I no longer use that clipper , and never had that issue so im not sure how to correct that 🙏🏽
@@AntTheBarber What Cordless Clipper do you recommend? I'm looking for a replacement if that's the case.
@@arnoldvillatoro3284 any cordless wahl , the magic clip , metal magic clip or senior 👌🏽 the babyliss fx is cool but not as versatile as wahl ... not yet .
Good video Bro! I have they and i put the blade and the case cover Andis Fade Gold in to my Envy li. Can make Really good cuts with them.
19 84 R nice
Can the Andis envy use the wahl guard?
Yes
Hi
I have a new Andis Envy the burgandy color what do you recommend to do ? I know the oem guard are garbage
the blade what do you recommend ?
I didn't spend much time with this clipper to be honest , I prefer the taper blade but that's just preference
Thank you for responding back
You recommend aftermarket blade and guards ?
@@richardbosh4522 yes
I bought some but they snag I dont know. Why the blade is new
Maybe the blades are set to close 👌🏽
Oh okay they can’t be zero gapped ?
🤙greT review fam
Good work bro
The Barber Teezy 🙏
When you charge for the first time 2-5 hours or so that it says on the manual. Does the light ever turn off to tell you it’s completely charged?
I can't remember but it should , I no longer use this clipper .
Hi there, just a quick question. I have this clipper with the fade blade on but i find that the open lever doesnt bkend into the 0 guard very well. Nor does the 1 open bkend into the 2 at all. Been a life long wahl user and i just cant get my head around why the upgraded guards still dont blend? Any tips? Thanks in advance.
Lewis Edmondson are you using the single magnetic guards with it ?
Lewis Edmondson or the guards that come with it ?
Ant The Barber the single mags. Also zero gapped.
Lewis Edmondson I'm honestly a Wahl guy too , I noticed with the single guards the struggle with blending as well . Haven't set my magic clips down since .
Big Lew they have a new version single mags andis came out with and they blend together beautifully now! You can go Sally’s and pick them up I did a review on them and they are dope imo
Is it clipper 220v/110v or 110v..?
Not sure
Ok . Thanks brother
yeah I watched it but what confuses me is tighten it down
Christopher Diaz once you have the blade set to where you want hold it in place and begin to tighten the screws a lil at a time switching back in forth so they stay in place where you want .
Let see these in action!!!
what fade blade is that?
KING it's the Andis Envy Fade Blade
AntTheBarber 509 I couldn’t find that so I ordered the Andis 66255 blade I think it’s the same
KING I purchased the Fade Replacement Blade not sure of the number
KING that is the one 🙌
Where to find those blades?
Yeah i have the same question as well. Seems like its discontinued or something. They have andis fade master replacement blade which the screw holes are different from the andis envy li blades
Question bro.
Do you think there's a way this Clipper could use Oster blades? I have a pair of fast feeds which I love, and i just was wondering if you could swap them.
From Fast Feeds to the Envy Li
Thx 🙏
Jdthebarber760 I'm not sure but I'd like to know ... you should give it a try and let me know that would be beast !!!
I appreciate it your quick response man, thx
And if I ever get to work it out I'll let you know 🙏
This better than the Magic Clips?
Detailed Barbers no not even close G
I'm so torn between magic clip or these with blade swap, I'm an andis ALLLL Day.... So I wont be disappointed ???
honestly i have both except i have the cordless envy li nation and i put a and is pro alloy fade blade on it and it out performs my magic clip its all a preference and hype imo and i got the new guards with my li nation which are the same as the double magnetic except with out the magic they a are just snap on and they are light years different from the original envy li guards and they came with a half and a 11/2 guard!! and I'm going to be honest with you my wahl cordless sterling 4 are killing my magic clip! i put a two hole slide on my sterling 4 and a fade blade and they feel like the new cordless senior
buckwitme1 so I bought the magic clips and premium guards, zero gapped then. I LOVE being cordless and they cut quickly through thick hair, BUT.... I’ve notice they don’t blend between open/close like my masters! So idk I’m slightly bummed I don’t have time to be using every machine on a haircut lol. Time is Money. Open for any other advice or pointers TY for responding although I already bought the magic clips, I feel like I should have went Li - T
yea the magic clip have a shorter blade than andis! and the guard system is what i don't like about the magic clip! the li blend very well imo my suggestion would be for you to put a taper blade on magic clip and see if it blends better which i think it does because the fade blade can leave a hard line and takes more to blend out between open and closed so try going to get a taper blade at beauty supply store near ya and see if that makes a difference but which I'm sure that what your issue is
To DIY people, it's an easy mod to make a double magnet to a single magnet....
Is it ? Were can I find that ?
I don't have a set of dual magnetic guards, but just by looking at the guards, I would start by Popping out the 2 magnets. I would then place one magnet in the middle of the guard and trace it ( of course, using an original single magnet guard as a guide ) cut the whole in the guard, put the magnet in the guards new magnet hole. Grab an old broken, same kind of guard and hold it above your new single magnet guard and light it on fire. Be careful and when the guard starts to melt, let couple of drops fall on the magnet. It'll make the molding when it cools. Use same material kind of guard so it could bond and it won't add weight. Use a blade or sand paper to make it look pretty. U can use other stuff to hold the magnet but it can get heavier. Again, this is just by looking at it. I don't have a dual magnet guard. And yes, I've done stuff like this...
Only thing Andis should fix on the single magnet guards is the "0" and "1" guard they are ×exactly the same 🤨 not like the double
Am i the only one who prefers single magnets over double? 🤔
I’m sure your not the only one but it’s all about preference 👌🏽
You can't Over tight it right
Christopher Diaz right
Plz and thank you
I bought these about a year ago......
TRASH!!
DroidLife magic clips much better
Why we spent a lot money for it then we must replace blade?? Andis manufacturer is suck or what? Engineering is damned on design but why we choose this brand?? People are crazy.
This video is years old , there’s a lot more options in the market today then the time of this video .
Cant really understand what your saying.your voice sounds like a frog.it vibrates my phone.
That’s funny I heard it just fine and thought it was a pretty good video
Gufaded 671 Good thing you can follow along without sound 😂😂😂 I'll work on that for the next time .
Can the wahl premium guards work on these ?
Yes if you swap some whal blades on it
They said it works thou with out the blades