GAME OVER!!! When the boost kicks in!!!
Вставка
- Опубліковано 21 сер 2024
- Filmed at TexasJamRacing.com
Dyno Tuned by 14x World Champion MIke Murillo
Need to get dyno tuned? Contact info below
Sales@texasjamracing.com 210-946-1199
Equipped with a Small Block Ford and a F1X Procharger,
Set up originally for x275 DragRadials but now Street/Grudge Racer..
Keep a eye out for this bad boy on the Streets of Texas and Tracks 2017
Filmed and Edited by: Skull Crusher Adventures ALL RIGHTS RESERVED©
Sponsored by:
www.monstertran...
www.intercotire...
www.nitrousexpr...
A Ford inside a Ford. That's where is belongs.
TexasRunIt BRO FIST!!!
My drag racing days are over....this is just for fun. Nitrous, Turbo or
Supercharger - No freaking way...been there done that and never doing
it again, hence the displacement. My car spent more time on jack stands
than on the road with that other crap. I always had the best parts and
still had nothing but headaches
studd11 :1 might not be built right :2 if they are high octane fuel built they tend to fall apart after a few passes, I have been around these cars all my life and I can tell ya they rarely have problems using the right engines and the right parts and if you know how to build them right or have them built right you will have a fun time, and if cars are your hobby you wouldn't cry about problems yea you'd throw a few words at it get pissed off but that's all part of anything in life and being a hot rod is just the same if you loved car you would fix them up right and have more fun then before and show off more, and engines and cars and all about learning you will know witch parts work better if you mess with it you will know if you have it built right if you learn about it from time messing with it and, and things about turbos and super chargers are you can't run the car at start up you need to let it warm up before you run it hard and then you need to let the engine sit idle after a pass cause that lets all the fuel run out the turbos bla bla bla and with any engine you can't build one a run it hard right away you need to run it slow holding at low rpm you can't run it hard right away cause you have parts seating in you need to drive it for 500 to 900 miles before running it hard I'd say for a drag car tho drive it a bit here n there don't run it hard for about 300 miles and then let her fly, I know I keep going on like you know nothing but really it's not that way I'm just telling you reasons why it could have done that and trying to pull you back but really it's not helping cause if you liked drag cars you would have stayed, good luck with any car you build if you ever build one again and please use some of my tips if you do so.
There's always someone faster. That is what many people that throw money at cars for years finally see.
cool valve covers
It's nice to see a distributor in the front, on these dyno pulls... Killin it...
I'm a gm guy but damm that's a good looking car and glad to see it's ford powered
brian quiroga We both know GM Motors are the best but you do want to see ford given a chance.
happytimes724 says who?
@@cellularsouth85 yeah the best at copying FORD'S WINDSOR...the mighty (LS) lol
yeah buddy, that's a bad bad ford...glad it's all ford!!!!
The way it sit rises on the dyno is beautiful
One of the best sounding looking vintage Mustangs i have ever seen. I am getting Novi2k on my stroked 438windsor in my 68 mustang soon.
That badass car has a lot of work into it..superb
I'm a chevy guy too but like all things automotive. That is a sweet Mustang and very tastefully done too! Great job.
DAMN!!!!! Thats a fucking monster!!! Would love to see it taking names
one of the baddest looking mustangs on the planet!
That thing sets the scale for bad ass
Andrew Romero its so bad ass!!
I'm a Mopar guy but I can appreciate nice cars and like the older mustangs,nice to see someone building an early mustang instead of a fox body! good job dude!
She's gorgeous. What a great build
im glad to see builds like this that are different and unique from common builds
I'm not the biggest Mustang guy, but damn this thing is a beauty...and she sounds amazing!
FORD POWER!!!
"I BLEED BLUE"
That's wtf I'm talkin bout...Ford power..
For the Love of Ford Thunder she sounds good!!!
This car has way over a $100k in it. Freaking incredible vintage mustang
I'd of liked to see some numbers like HP/rpm,Torque/RPM?? Looked very impressive..
Its a Grudge Car he's not going to show numbers brother
looks like it wants to eat the dyno! awesome!
Hands down one of sexiest cars I’ve ever seen 👍👍👍👍
so yeah. I was kinda expecting to see it run. kinda feeling like I got click baited?
Jeff Williams teasing you tell i post up full video
This car is perfect.
Beautiful car all around!!! Not typical to see attention to detail like that on a car setup for drag. Great editing too btw!
There was a guy running ET 8.91 88 FOX body with a stock bock bottom end 302 cid 5.0 block, mind you it has heads on it, and intake, and a good size turbo, claims the bottom end has never been apart... It's all about tune, and drag chassis adjustment, this baby blue 68 has that sound, by my accounts the way it's lifting off the dyno it's making some serious numbers.
Love seeing a '67 without a Eleanor front, the factory got it right. I went with a coupe too as they are way sexier than fastbacks in my opinion!
Novak Evans yep. Love coupes. Gota 69coupe myself
Novak yep I have a 67 coupe myself with a 434 ci N/A beast in it.
That's a sweet looking LS in there ! ..............................OH, SNAP, 😮 IT'S A FORD ENGINE. HELL MUST BE FROZEN. 😶😂
Good looking Mustang! I have an F1R in a '69 Camaro. If I lived closer I'd love to race sometime. I live in CA.
Super clean car
That video with the still pics is very Kool how you done that. Very badass MuStANG
Thanks brother
omg!!!! these Chevy boys will never understand the power of a small block Ford bad fuckin ass man
That procharger just sounds f***ing wicked
I also have a 67 coupe I think yours is a little bit more angrier than mine though, very nice car bro I like it good job, I understand about x 275 being too expensive I'm building a leaf spring car
Watch this with headphones on. Nice ride!
Love how that beauty rares up....WOOT WOOT!
Blaine W heck yess... my ears were killing me after this day of filming
any numbers? sounded like 1200+hp
foxxrider250r No Numbers... Gotta pull beside him call him out
Javier Padron ah hell naw i wouldn't even consider.
damnnnn son ima keep an eye out for this beast this year FORD FTW.. I.G??
sMaShbOi Bounty Hunters No Prep... he should be there
sMaShbOi dubc_67 i believe
Javier Padron thanks brother
sMaShbOi no prob brother thanks for stoping by
no shit me too mean mean bitch right there
That's a bad little sbf.
Any hint on the numbers?
i have a 68 coupe an i have to say this the baddest cleanest sexest mustang on this planet!! amazing job!🖒👏
That rub on the back tires could be fatal!
That's a sweet ride man! Beautiful! Sounds great too!
Now that car is pretty slick!!!
just a little turbo 😂
Dam those pulls sounded sick! Bad ass video
BoostaholicRacing thanks my fiend
Woooooo this thing is nasty!!!!
I'm sitting in my truck on an oilfield Location and I pushed the gas down watching this video reved my truck to the moon hahaha company man asked me what the fuck I was doing just told him I dropped my water bottle hahaha damn this video is amazing
Was that Murillo tuning this beast?
Awesome car! But why didn’t you show a screen shot of the dyno? No mention of the horsepower or torque? With all that time and different camera angles, you missed one of the most important shots!
Two simple words: Grudge Racer
sick video bro 👌
JULY PATINO hell yeah brother thanks...
Wow, beautiful build. I have a 68 I'm working on. Wondering what size tires he's running on the back?
Love to see more videos of the car. That thing is sick
NICE JOB!!! you can tell this thing's built Rite, with the right motor, it's not surprising to me reading some of the other comments that people actually thought this might have an LS motor in it, there's two things that really gets under my skin and that's liberals and GM douchebags😤 putting LS Motors in our Ford cars🐈now set it on kill and let it eat some LS junk food!!!!
hahaha damn rite
Did this car blow up. Haven't seen it in years.
Beautiful car wooooow I love it 😍 im a car guy I see something nice I like
That's a bad bitch! If he ever wants to sell it have him contact me!
That's a sick piece
Yeah Buddy, indeed
well...What did it pull????
God fuckin damn!!!!!!!!!!!!!! That car is fuckin twisted shit comes to live like the devil this is badass!! I love ford go ford nice car
BadAss FORD HORSE POWER MUSTANG!👍
Badass!! 👍🏻
love mustang it was beautiful bad ass
Sounds like that engine wants to break the dyno.
Dinno has seen over 3000hp 😎👍
Very Nice
Nice ride man
How does it hook? Badass ride!!!
the axles looked strange
I'm a gm guy die hard but this is one sweet stang
should call it the. TEXSTANG. TEX-STANG
Clean ride
how the heck do the rear tires not rub on the quarters ?
Jeff Roscher that's what I was thinking
Anybody know what wheels are on that Mustang?
omg that lift tho bro do u even lift
Well?????? What was the Dyno results??????????
Is this car still around. Guessing 1kwheel.
excuse me sir you appear to have an engine on your supercharger
Sweet ride. What rims are those?
Nice wheels....
Beautiful
anyone know who makes the wheels on this car? old school cool!
Where are those Track/Street footage?
Why do most turbos use no air filters? That can't be good on an engine.
Well, what were the dyno numbers?
so what did it pull??
What was venting in front of front tire?
Sweet!
she's perty!
she is one sick sounding ford
bestial!!!...ford is ford...nice color...small block..just a lil' guy.
....and u can drive it legal on the street in America... in germany, u get an personal punish from the police! :D
NICE
Is it 8.2 deck
What happened to this car
When the boost hits and Ford engines literally crack in half I've seen it. Maybe the old ones could handle boost but the newer ones would literally break in half.
epoxeclipse at 370ci its most likely after market or boss block maybe
Depends on year of block. Used to be 302 blocks cast in Mexico. Everybody was looking for one.
"Game over"...yeah right, I want to see it run or its just another mustang.
dat be a 67 mutang ri dare
What's the paint code on that machine?
You can dress a Chevy engine all up but will never look as good as a Ford engine in a old mustang
What song is that?
3:36
Thank me later