At about 31:00. Load 16 to DB1.DBD 12 will interfere with DB1.DBD14. Making it hard to reset value since DB1.DBD14 is for reseting. Write to DB1.DBB12 instead!
hi I have an application using an incremental encoder to measure a length and make the cut to the specific length. i use this module but i have probleme with sumulation can you help me please ?
Thanks for this video...but please, where do you connect the power supply to the PLC and where do you connect your laptop to the PLC.... What are the use of the PN port and DP ports
The module worked with the old project. When loading a new one (the hardware has changed), the module gives an error "module without parameters". I did everything as in the video. Still the same error.
@@tauqiranwar5699 Please test with this Electrical speed=[[(Max Frequency response(kHz)*1000(Cycles/minutes)]/PPR]*60(Sec/minutes) Example: Max Frequency response=120kHz, PPR=25mm/0.01mm=2500PPR(if the required linear resolution is 10 microns (0.01 mm), and a screw with a 25 mm lead is used) then Electrical speed=[(120*1000)/2500]*60=48*60=2880rpm I hope it work. Thanks
@@generaltechnologyknowledge5165 Thanks a lot... In FM350-1 (6ES7350-1AH03....the operating mode RPM measurement is available....is it also need for this latest FM 350-1..
Thanks for video, Excellent. Make video to read Speed through FM module
Excelent video!! Thank you so much
At about 31:00. Load 16 to DB1.DBD 12 will interfere with DB1.DBD14. Making it hard to reset value since DB1.DBD14 is for reseting. Write to DB1.DBB12 instead!
Thanks for the Video. It is very helpfull
Super very useful amazing video thanks bro
Many thanks for the video ❤
merci pour le video mr , mais j'ai un Question s'il vous plait, est ce que on peut utilise the high speed avec plc 315 2pn/dp?
Oui , tu pourras 'utiliser .
@@zarrougmohsen7026 merci
Hi thanks for the video.
Can you make video for encoder positioning. How to interface the on and off degree.
Hello sir,
Do you mean use encoder for calculate and measure the angle right?
@@generaltechnologyknowledge5165 yes please. Thanks in advance
I have already used fc2 in my project, can I change the name for the new encoder ?
hi I have an application using an incremental encoder to measure a length and make the cut to the specific length. i use this module but i have probleme with sumulation can you help me please ?
Thanks for this video...but please, where do you connect the power supply to the PLC and where do you connect your laptop to the PLC....
What are the use of the PN port and DP ports
Nice video
Can u please make video of FM 352 for absolute encoder
If you choose 5V incremental, it gives different options than selecting 24V incremental encoder
Yes it should be different
@@generaltechnologyknowledge5165 brother, I have to count 5V single pulse...Can I use "A" only in monitoring or is it possible?
@@tauqiranwar5699 Yes that correct,
Please select to A possition
@@generaltechnologyknowledge5165 thanks, when I select Operating mode @ continuous counting it gives SF, but when I use single counting it gets OK..
The module worked with the old project.
When loading a new one (the hardware has changed), the module gives an error "module without parameters".
I did everything as in the video.
Still the same error.
Dear sir,
Please check power supply 24VDC supply to module connect correctly or not?
@@generaltechnologyknowledge5165 auxilary supply ok. If i disconnect, module says : "no supply"
@Key Sansa were you able to fix your problem? I have the same problem
@@thomasb4422 Yes. Disconnect the encoder and configure the module without it. After that, connect the encoder.
@@thomasb4422 All connections with power off procedure
How to use FM350 - 1 in TIA
Ok I will create show and share soon.
Thanks
Thanks
ใน TIA ทำยังไงครับ S7-1500
How to do with S7-1500 ?
Please let me know how to read speed through FM 350-1
Dear sir,
We can use the formula to calculate speed by using encoder.
@@generaltechnologyknowledge5165 any clue about formula?
@@tauqiranwar5699
Please test with this
Electrical speed=[[(Max Frequency response(kHz)*1000(Cycles/minutes)]/PPR]*60(Sec/minutes)
Example: Max Frequency response=120kHz, PPR=25mm/0.01mm=2500PPR(if the required linear resolution is 10 microns (0.01 mm), and a screw with a 25 mm lead is used) then
Electrical speed=[(120*1000)/2500]*60=48*60=2880rpm
I hope it work.
Thanks
@@generaltechnologyknowledge5165 Thanks a lot...
In FM350-1 (6ES7350-1AH03....the operating mode RPM measurement is available....is it also need for this latest FM 350-1..
@@tauqiranwar5699 Yes sir