In your campsite plot video, inside the house, you had the umbrella beside the bed and you referenced your beginners glitching video to do get that ground object inside. In the glitch video where you put the fencing inside the house, is that the method used to put the umbrella somewhere besides on the ground outside? I’d like to put an umbrella on my pond dock. (Without using a red present). Thanks. Love your videos. 😃
Hi Fleurs! I'm currently doing the sinking table technique, worked as instructed. However, I've ran into a problem: I can't seem to place the tables as closely compared to what I've seen from your other videos. I can't even make the edges of the table touch :c Is there something that I might be doing wrong? I'm using Square Concrete Paver as I have a lot of it and I'm using Capital Chic Tables. Also, thank you for the detailed video! Your instructions are clear and easy to follow
Once the table is sunk you can place a pillar or other item on top and then use the alt select button which should allow you to get them closer together. Alternatively I sometimes ghost the tables once they are in position, I will just ghost out the table not the paver.
Thanks so much for the video! Really great. I wondered if you'd be able to help me? I'm trying to place a floor item within the bay window and I'm not sure how to go about it. Do you have any suggestions? Or what you think would be the best way to do it? The item is the Moonstruck Fungi Planter. Thanks!! :)
I have done this! The best way I tried to do it was use a builders block and place a floor piece on top then use the pillar or cup to move it into it using the alt select method.
@@Fleurs_ Hiya! Thanks for your reply. I'm not sure why, but when I alt select my bowl, i'm finding now the select is now reverting to the center of the entire multi select (I hope that makes sense). Thanks again!
The easiest way is to use builders floors. Place one builders floor on the shelf then rotate it 180 degrees, attach another builders floor and place your ravenwood spotlight. Then pick up your original floor and place. The only downside is you will have to see the builders floors; unless you sink them.
Thanks so much for all the tips~ I just encountered a problem though with sinking. I'm unable to pick up the paver now after successfully sinking the table. Idk if it's because of the recent patch. Do you know how to counter this? Many thanks~
everytime i try to sink trick with the shelves when i alt select the paver the wall and shelf are attached too😭 i cant get the paver to be directly underneath the table also meaning i cant join them seamlessly because there’s a paver attached next to it 😭
You don't alt select when the table has been placed on the paver. Just grab the paver and the table will move with it. Once it's sunk you can also then use alt select and it will allow you to move it. If the paver sticks out a bit I normally hide it with another table or foliage.
You aren’t trying to place the hot key item down you are only using it so that the previous item is no longer in your control. Once you’ve pressed your hot bar item you cancel it by right clicking.
For Switch Player sinkink table. K- fierce have a good Video how to make a sinking Pool. I made my water place with this . Thanks for your great work. I learnd many. Have a nice day.
such a great and informative video emma! tysm for mentioning me in your description too ! will be referring people to this!!
thank you Nora!! 🤍
Amazing video Fleurs, this will help so many people to start playing with Palia magic. Thank you for the shout out as well, very sweet❤.
Thank you Anne! 🤍
Thanks for this video. I actually got some wallpaper on a floor. You made it easy to understand. Ty again.
Glad it helped!
Im new to Palia and really appreciate this video very much! Im still trying to figure out how to rotate a pillar but this has helped soooo much!
You're so welcome!
In your campsite plot video, inside the house, you had the umbrella beside the bed and you referenced your beginners glitching video to do get that ground object inside. In the glitch video where you put the fencing inside the house, is that the method used to put the umbrella somewhere besides on the ground outside? I’d like to put an umbrella on my pond dock. (Without using a red present). Thanks. Love your videos. 😃
Yes that's the one! The same method as the fencing!
Sometimes you come across bugs you don’t want fixed.
100%!!!
Thank you Super Helpful!
That fountain looks amazing, Emma
i see my name ! ! awww... i feel all warm and fuzzy inside now :)
Thank you
such a great vid! thank you!
Thats super helpful!
Hi Fleurs! I'm currently doing the sinking table technique, worked as instructed. However, I've ran into a problem: I can't seem to place the tables as closely compared to what I've seen from your other videos. I can't even make the edges of the table touch :c Is there something that I might be doing wrong? I'm using Square Concrete Paver as I have a lot of it and I'm using Capital Chic Tables.
Also, thank you for the detailed video! Your instructions are clear and easy to follow
Once the table is sunk you can place a pillar or other item on top and then use the alt select button which should allow you to get them closer together. Alternatively I sometimes ghost the tables once they are in position, I will just ghost out the table not the paver.
@@Fleurs_ you're a life saver!! 🤩😊 I did the first one and it worked. Thank you so much!!
Tysm, your videos are very concise & informative. How do you take off the grid when using a pc?
It is Z for me!
@@Fleurs_ thanks
Thanks so much for the video! Really great. I wondered if you'd be able to help me? I'm trying to place a floor item within the bay window and I'm not sure how to go about it. Do you have any suggestions? Or what you think would be the best way to do it? The item is the Moonstruck Fungi Planter. Thanks!! :)
I have done this! The best way I tried to do it was use a builders block and place a floor piece on top then use the pillar or cup to move it into it using the alt select method.
@@Fleurs_ Hiya! Thanks for your reply. I'm not sure why, but when I alt select my bowl, i'm finding now the select is now reverting to the center of the entire multi select (I hope that makes sense). Thanks again!
Hello fleurs :) can you please try the ravenwood spotlight place on the floor? instead of placing it on the ceiling. Thank you
The easiest way is to use builders floors. Place one builders floor on the shelf then rotate it 180 degrees, attach another builders floor and place your ravenwood spotlight. Then pick up your original floor and place. The only downside is you will have to see the builders floors; unless you sink them.
@@Fleurs_ ohh thank you. im doing it with a floating building floor. Thank you again that helps a lot :)
Thanks so much for all the tips~ I just encountered a problem though with sinking. I'm unable to pick up the paver now after successfully sinking the table. Idk if it's because of the recent patch. Do you know how to counter this? Many thanks~
Do you mean to remove the paver or move the table? You aren't able to fully remove the paver as that is the anchor.
@@Fleurs_ TYSM for replying, I must have seen it wrongly in the video 😅
Thank you for all the tips and vids~
At 9.51 How did you get the yardwork logs to stand up like that? Is there a tutorial for it? Thanks :D
Gosh i feel stupid but... what does "hit alt select" mean? do you hold down the alt key on PC and click??
Just press alt on the keyboard to select all.
everytime i try to sink trick with the shelves when i alt select the paver the wall and shelf are attached too😭 i cant get the paver to be directly underneath the table also meaning i cant join them seamlessly because there’s a paver attached next to it 😭
You don't alt select when the table has been placed on the paver. Just grab the paver and the table will move with it. Once it's sunk you can also then use alt select and it will allow you to move it. If the paver sticks out a bit I normally hide it with another table or foliage.
The wall paper floor doesn’t work for me
Do you have any tricks or info on how to glitch or ghost on a Steam Deck? The struggle is real, no idea where to start!
I do have a steamdeck but I haven't tried it. I would suggest starting off with the Switch friendly glitches as they will definitely work!
@@Fleurs_ thanks girlie 🫶
the wallpaper glitch does not work for me :(
How do you place the tree into the basket?
I first placed the basket, then ghosted it and then used the flick method to place the tree.
@ thank you. I’m trying to understand how to ghost things. lol.
I can't get spring lights inside xc
it can take a while, if youve done the steps it should work. Maybe try with another item or change your frame rate?
how to get the bowl?
You learn it by crafting the gourmet set which you buy from Reth's till.
Odd. i can't do the ghosting method, have they already patched it? It wont allow me to place the hotkey item down.
You aren’t trying to place the hot key item down you are only using it so that the previous item is no longer in your control. Once you’ve pressed your hot bar item you cancel it by right clicking.
@@Fleurs_ ooo!! i got it now! thank you so much for responding
For Switch Player sinkink table. K- fierce have a good Video how to make a sinking Pool. I made my water place with this . Thanks for your great work. I learnd many. Have a nice day.
Thank you!!