Proof! Milwaukee sucks
Вставка
- Опубліковано 5 лис 2022
- I’m a fan of @MilwaukeeTool and I had fun at their booth during the 2022 SEMA show. I was genuinely impressed with this wet/dry cordless vac. I’ll be adding this to my collection 🤘
- Авто та транспорт
The Milwaukee was my wife 20 years ago, now it feels closer to the other one
UA-cam gave me a survey about your comment asking my opinion, I gave it an excellent rating 😂
@@bradcarpenter1881 Unlike his wife
@@jeffgayzose8129 😭😭😭😭
Now she blows and doesn't suck?
Brah🤣🤣🤣🤣🤣🤣
I thought u was about it expose them lmaoo
U was......Jesus christ
@@dan3458 🤔
It did actually. Look what it’s compared to. A $15 shop vac 😂
@@dan3458 u was?? do you even speaking english right now?
I read this in Stavros Halkias voice and it was that much funnier!
Yeah, you should've made them switch tubes, not just balls.
i wanna see what power settings they have on them
Or a dirty filter
I agree, also switch machines, or just balls and tubes.
I dont like milwauke, but this is probably rigged
@@indian.techsupport Milwaukee doesn't like you
"Mom, I told you not to bother me while I'm vacuuming my room!"
Fuccen Doofy
Mom says you have to respect me when I wear the badge.
smell my finger..
"Imma need 5 minutes alone with these vacuums to really see which one is better"
Special officer Doofy.
When you compare two different size vacuum's
And the gray looks older too..
I was going to say the same thing, it's obvious. It looks like one is a 2.5 gal the other is 5 gal. Terrible comparison, Terrible demonstration.
They are indeed the same capacity the thing is that the Milwaukee is on a packout roller stand
the smaller vac preforming better be a good thing. Looks smaller to me any way and I have the other vac
And filters probably plugged on the smaller one too. Looks like a carnival skit
The competition is probably a Hart. I recognize the sound and they're both TTI
Looks more like rigid
@@THEBRAINANAYTOR that's what I thought. looks like the low end rigid vacuum that's less than half the price of the milwaukee.
I think tti only has licensing for cordless power tools under the rigid name. The rest of Rigids tools are either manufactured by someone else or rigid. It’s funny because rigid makes great plumbing/hvac hand
Tools that Milwaukee constantly try’s and fails to beat .
I think it's actually a Porter-Cable and a very cheap Walmart online available only lbs I could be wrong but it definitely has the right shape and color
P.S I just went and looked at the video it even has a piece of gray tape under the right hand side of the cable exactly where the Porter Cable logo is located lbvfs 😂 that is literally under $35
@@my_master512 I'm sure they all come out of the same chinsey factory anyway lol
I'd have asked to swap the connections at the vacuum cleaner.
How sus do you want this video to be?
"Yes 😏"
Always “yes” 😂
@Michael Terrell Stupid sense of humor
Do you speak English?
There is so much more to that test than just the weight of the ball 💯 without looking at the make and model of both of those vacuums and first identifying if they're even competing in the same category
Smart man👍👍
I love how they try to make their brand look good by comparing it to something clearly smaller looks less powerful to😂
I’m glad somebody else noticed it.
Lol right I saw that and thought it's not even a competition
I mean to be fair they're not saying "We have the best vacuum because it's better than this one". They're just showing that their vacuum is more powerful than the other one. If you lack the critical thinking to look at the two and see that the Milwaukee is clearly bigger and probably more powerful, that's on you.
Yeah and I’m a Milwaukee fan! But they all do it!
@@got2getit204 Milwaukee does it the most lol especially on fb
You should have checked the connection where the vacuum hose meets the clear hose. If one of those has a complete seal and the other one doesn't that's going to be hard for people to switch out or notice
Nascar inspector: Where are you hiding the vacuum leak at?
They have tiny holes drilled in the competition's hose/tube
glad somebody said it
Dirty tricks by a dirty company
@@jsav6058 good thing they have a vacuum out to clean up then
@@jsav6058 yep Milwaukee was the best now everyone is catching up and all I see is demonstrations from them showing how their tools are better using tricks
Funny because they still have some of the best tools on the market and won an award a tool in 2022. All I see is complaining
Didn't switch the tubes!
why one vacuum cost 3x what the other one does
😂
The description is perfect Lmao! Got me forsure😂
Lmao. “It really sucks balls!”
You should have asked him to see the filters I'm betting the Milwaukee's got a nice clean filter and the other one's been sucking brick dust for 2 days LOL
or even the milwaukee is without a filter 😅😅
vacs have a filter 🤯 I thought that was smell bad paper that reminded you to dump the water out of the thing
Well, maybe if they used vacuums that were around the same size, it wouldn't be so 1 sided. That Milwaukee is huge, compared to the other one.
The deaf guy 🌝
The blind guy 🌚
You should have checked the tubes to make sure he didn't have a filter or some kind of mesh pushed in where it connects to the vacuum. Pretty easy setup to make it look like one is good and one isn't.
Being twice as big it has to be better😂
Twice as big black vaccum is deff bigger Milwaukee has a whole storage compartment on top
I really hope that was a joke and not yet another ignorant comment.
Miluakee is soo good! Man i have been using them for 5 years and their impacts are still good
That repainted Ryobi stood no chance.
I’ve been using a Milwaukee impact at work for seven years. It’s been dunked in stock a few times, dropped, gone through a lot and still purrs.
I won't trust this till I see both filters and make sure there isn't some holes in the tube. Lots of ways to fake this, im sure theirs is better it looks larger even.
There is 100% an air leak in the "other". I use vacuums to pull strings in conduits and the cheapest of the cheapest works. There's no way it would be that bad.
he steps on the hole of the Milwaukee to close it.
He's stepping on a trigger to release the balls.
No. He's depressing a gate that let's the balls go free 🤦🏻♂️
His foot always covers the milwalkie tube more, causing more suction
He's not covering either hole. He's depressing the gate that let's the balls loose
The 1/2" milwaukee Fuel impact driver is a beast
Plugged filter
Sus rates 📈
I like that power head for the vacuum that fits all the different size hoses
Check the motor hp, filters to make sure none of them are clogged on purpose etc... Good video
Get a ridgid
Bosch has a pretty slick one
Dewalt stealthsonic
You need to make sure they have similar technical characteristics! For now Milwaukee sucks!😂👍
I paused the video and measured on my screen, these are two different size tubes. How that is not noticed in person is just wild.
If you want to be onset and fair you need to show the filters. The ridgid could be clogged with drywall dust. Now I’m using the festool because the tool plug auto start, Bluetooth and suction power adjustment, but when I was using ridgid, many times it was almost impossible to vacuum because of the powerful suction.
Bruh miltrashy really found the worse vac to compare there products to 😂🤣
I ain't going to lie, you had me in the first half!
I can’t tell how much I needed this laugh. 😂
The tubes could be different diameters that you wouldn't notice if it was only a millimeter difference but the change in vacuum could be very significant.
you should’ve had a festool extractor in that mix too that would be the actual test lol
They put a cone with holes in the top of the tub where the hose connects to the clear tube. Easy trick use to do it all the time at shows
my entire equipment setup is Milwaukee i exclusively design and build my homes w theyre products even down to my cup..i have a few makita products but the Milwaukee tools are my weakness
What filter are they running? What’s the whole size die inside diameter? There’s a lot of questions. Derby looks like a really good vacuum, vacuum bag.
The competitors tube has holes drilled somewhere to release suction.
the reason the competition is so loud is they put a flow restricter in the comp vac to reduce the suction! I worked in sales demonstration for a time and know all the little tricks!
I am curious to know if the tube on the other one is slightly narrower
Wonder if there are holes drilled into the other tube to make it lose suction
It’s possible that the left tube has a tighter diameter and has a better seal against the ball. And they know that nobody is gonna ask them to switch tubes.
Only thing left to test was the pipes they were using and making sure that both vacuums where at full charge and power.
No joke. Those aren’t just ping pong balls. They are weighted. I saw this display at sema. Very impressed!
I would've asked them to switch tubes.
One tube could be ever so slightly wider, this would mean less of a tight fit for the ball so it will harder to suck it up due to a lower restriction
Now can you remove the voltage regulator on the other vacuum?
The tubes can be tampered with as well. Change the tubes's places as well
The other hose has tiny holes poked in it. These are the equivalent to State Fair games.
The Milwaukee machine is literally twice the size of the other one. Lol!
I miss the metal case Milwaukee's, the reps dont even know what a Quik lock cord is anymore
I'm spoke with a Milwaukee Representative one day and showed my Milwaukee flashlight and my Dewalt flashlight. And he's answer was Dewalt better and said we working, so I'm waiting for a better flashlight
So how about the tube diameter? Also are they both on full power. But honestly the "other barand' seema to suck air more than the other side that seems to be more tighter fit.
I love those rigid 5 horsepower little mini wet dry vacs... but if Milwaukee is producing something similar I must take a second look
Put a Karcher in that test and see what the Milwaukee is really made of!
When I saw the title "I said I knew it".. then that happened 😄😄😄
my thought exactly
he got us in the first half not gonna lie
forget the fact that the tubing could be different or there is a dampener or something on the other brand cleaner but that "OTHER BRAND" looks like its straight out of china for $20
Milwaukie customer service sucks. Emailed them 3 times never heard back. Will never use them again
I would've wanted them to be clear on the other brand of vacuum and its specs directly compared. Its super easy to get a vacuum thats similar size but no where near eachother in terms of power.
It's possible to cut a hole on the hose not visible and make the other vacuum really suck at sucking
I love Milwaukee tools and have several but even I would have had him switch the machine over to the other tube and ball. There might be tiny holes in the one tube causing suction loss. Also I’d love to see the tools themselves what setting they each are on and also see the filters and how dirty they both are
Can this be used to extend a certain appendage? Asking for a friend
Been Waiting for that joke huh 😅
Did you check the filters? If one has a standard filter, and the other one has a HEPA filter, the vacuum with the HEPA filter is going to have much less suction. Some guy from Kirby tried to sell me a vacuum by pulling that trick on me!
Would love to see it try against a festool vacuum it would definitely loose
I thought you meant that the Milwaukee vacuum actually sucked lmao but I thought wrong in other words it has better “suction.”
Parlor tricks at a trade show, gotta love it.
Where is that grey vacuum from? Wish or SHEIN?
I would ask them to switch the pipes. Maybe the other pipe is punctured. Lol. I own a packout Milwaukee vac not as strong as a corded obviously, but so good.
There's a clear size difference between both of those vacuums. Pretty sure the suction motor on the "other" vacuum is a lower voltage
This is the 9 gallon/dual battery version correct?
You really got us there 😂😂😂
NGL the title had me!
I have one of these and it works quite well. Only draw back is its battery only
I wish Milwaukee would make just a normal corded shop vac. That and corded air compressors. I get their cordless tools and batteries are great but everyone else makes these.
The tube on the right is most definitely a larger diameter the difference is slight, but in terms of the amount of air able to get past the ball its enough to make that difference.
The guy steps on the end of the Milwaukee side to create more suction
Switch the tubes. Check the power draw, filters, etc. I'll keep the cheap vac that works great.
Wonder how many pin holes were in that tube
With my trust issues. I'd have to inspect the bad one for defects that may be intentionally put there. Like a hose that is somewhat clogged.
Are they the same size vacuum motor?
The Milwaukee is 80cfm with 60" of lift. My ridgid is 96cfm with 100" of lift. And costs 1/4 the price.
Is that grey vacuum from the dollar store?
I bet the right tube was smaller restricting the airflow more.
They could've wired a resistor into the competitors vacuum to dull it down a bit
After seeing the new 1/2 in inpact was breaking in the parking lot i will stay dewalt.
A lot goes into this. Line loss, amperage to vacuum motor, filter and turbine design. Generally speaking, a louder vacuum means more power draw and a high motor speed, which leads me to question whether or not they took the filter out of that Milwaukee for the purposes of demonstration. Either that or they designed the vacuum to be used with 30 ft of suction hose 🤷🏼♂️
It's a cool demonstration but until I can take both machines apart and compare them side-by-side I can't say it's an apples-to-apples comparison.
Switch the pipes, one pipe might be a little bit bigger. The old traveling salesman used to do that selling vacuums
Maybe my eyes are getting bad but it looks like Milwaukee has a 1 7/8 hose where the ridgid has a 1 1/4?
What are the specs and prices? The Milwaukee looks significantly bigger just st a glance
Yeah would be really intered to see their filters and how dirty the competitions filter was.
Shoulda checked the tube to make sure one wasn't tighter and restricting it in any way... just to really be 100% sure of course.or they wasn't restricting the flow of air on the hose side of the competitors side also is the only way to really know! Also coulda been why it was running loud having to suck harder to get air flow?
He steps on the end by the ball, each time to create more suction.