Watched absolutely 100s of how to build garden bench on UA-cam unfortunately most of them was not useful and the rest unclear or complicated , but the way you have explained it’s amazing, very easy , clear and smart. Thank you 🙏
That is awesome!! I am so happy to be a part of your first wood project. I hope this is the beginning of many successful projects for you. Thank you for letting me know.
I just finished making this bench. It took me about 5 hours, but that was because I kept coming back to the video to make sure I was doing it right. I'll make a couple more, and then make a few chairs by shortening the 48" boards to 26" or so. I did all the straight cuts with a chop saw, and the backrest and arm cuts with a jig saw. A band saw would make it easier, but really, you could do this project just fine with hand saws and sandpaper. This is the first DIY video I've ever seen that explained everything so well that I never had one minute of confusion. I wrote down the measurements, and all the steps as I did them, so now I have a written building plan in case I forget how to do something. Thank you for this video. I love the bench, even if it takes two men and boy to lift it. :)
Just finished my Garden Bed run for the year and was looking for new projects ....... NAILED IT !! Thanks so much for this video ! I always trust a glue and screw man !! Just sayin'. I retired 10 years ago and went in the hospital for a life saving operation .... then ANOTHER !!! I'm to much of an old War Horse to give up. I build things and sell them CHEAP. I like the idea of giving back for all the things people have done for me over the years .... makes an old man feel useful again !! Take care !! Thanks again.
Just finished building it - took two weeks working on it a little each day during this shutdown. Used redwood and took my time sanding it down real smooth, going to finish it up with Danish oil tomorrow. Looks great, thanks so much!
I just finished building this bench yesterday and found it very easy to build when I watched the video and took down all the measurements. The result is a very nice, very sturdy bench. Nearly anyone could build this with a minimum of power tools. The buy-list and cut-list are quite accurate. Hardly any waste or scrap wood left over. Cost me $40.18 for the pine lumber I bought at Home Depot. If you're not an expert woodworker, and you don't have a lot of money, don't be afraid to tackle this project.
I just built this bench. You did a great job on your instructional video. I had no problem building this. You explained everything step by step. Thanks
I made one today and its perfect. I did alter the standard European equivalent of 2 x 6 ans 2 x 4 Timbers to US dimensions and worked from your cut list .it was a project I did with my son and he enjoyed doing it as much as i did .
Well Sir , today April 28 2019, I made a bench using your plan and it came out very good. All the measurements were accurate, Thank you. Now on the back rest I would extend about three inches on both sides on the top two pieces. I just completed mine and my daughter is asking me to make her one . Wow, I thank you for your time and your encouragements in making me so useful. Edward. God Bless.
@@SoatMon I forgot to tell you I also use wood dyes and stains over the sugi ban and it looks incredible. Thank you for giving me the easiest plans in the world it helped with my confidence.
I came across this video the other day and have made the bench today. I just want to say thanks as the bench is great and your video made it very easy to make. Thanks again
That's great!! Thank you for letting me know. I'm glad it worked out well, keep up the good work. Stick with it, I'm sure you have many more awesome projects ahead. Thanks for watching!
Simple and effective, strong and will last for ages, great build, well informed tutorial, I will be making one of these next weekend , I have just the spot, in the sun, we do get the sun a couple times a year so it's best to enjoy it , Lovely job thanks. From the UK 👍
Hi I built my bench from your plans, absolutely awesome. Mine didn’t come out quite as good as yours but I’m more than happy with it and it’s so solid. Thank you.
Thanks for your video. I used the same design except changed the Arm rest , seat and back boards to 5/4 deck boards. I also increased the width from 48 in to 54 inches (the back rest 51In) and finally made the top back board the same length as the seat boards so it extends a bit and then rounded it off. Looks great and was easy to build. Thanks again.
Just gave ny granddaughter her bench for her B day. 3 one got her done also found a swing plan that's easy and as ive finished my last one till spring i noticed i could have left the legs off your plan and used that for a swing oh well learn and live .The weather here is perfect for yard stuff so been changing my metal shed some so i can get to my saws finished mt son's swing for Christmas and got to make a a frame for that . Thanks again for your ideas and imfo .RD
That is a great idea, you're right, it would make a good swing. Thank you for letting me know that you made some! Good luck with your shed and other projects!!
Just finished mine, had lots of spare wood from a garage build, took me two hours to cut and build bench, very easy instructions, i made mine slightly longer to fit 3 people and included centre rails to combat bending.
Thank you so much for your video.I made it. It was very easy and I am an amateur when it comes to this stuff. It took me three days to finished. However, I did Shou sugi ban, stained it red and applied linseed oil as a finish. It came out very nice.Planning to make a couple more.
Made one of these today, thank you so much for a detailed and easy to construct solid bench. One thing I found was that the cross braces for the legs should have been 23 1/2" an not 23" so I have a bit of an overlap. May be due to the slightly different timber sizes in the UK....but I can live with that..
Built one last weekend, I did a little bit of modification, my wife and I are both over 6ft so I made it higher. I compared to a camping chair for desired height. We are sitting at 20in so I made the legs 28in high. I might do even higher next bench as we like a higher arm rest too but easy enough to put a couple 2x4's under the arm rest to raise it. I also made it 12 in wider (60in vs 48in) by using 2x6x10's for seat/back instead of 2x6x8 (and one 2x4x10) and added a short 2x4 to the base middle to prevent sag. turned out wonderful, very nice plan. I will probably build a couple more. I might see if I can find a way to angle the seat slightly, I find a flat bench a little more uncomfortable vs one that has a slight decline towards the back.
Finished this bench turned out Nice!! Your cut list you mention in the video we’re all spot on thanks so much keep the videos coming I’m learning a lot from you! Bravo!!
I had some scrap wood and your video was the first one I found that looked easy enough to build. The bench turned out great! The one change I would make is to extend the length of the legs to maybe 25" to raise the arms up a bit. Again, this was super simple and a heavy duty bench to add to my yard! Thank you!
You're very welcome. Thanks for telling me that you built one. You must be tall. I would like the arms higher also but it fits my wife and the kids perfect. Thanks for the comment.
Ive made3 benches now and a porch swing working on #4 bench and changed bench box to 2x6 i was having a bad day didnt want to go back yo hardware store for more wood so used what i had it worked great and it is sturdy .ITS FOR MY GRANDAUGHTER ,my wife ,my daughter got to build 1 more for son then iam done with those benches
Nice bench I like the fact that they are heavy they will stay put and wear better being that they are beefy. I made two benches some what like this years ago. I did notice the feet started to rot after 5 years due to the end grain was touching the ground. My fix for that was 5/8 decking boards cut in style like a coaster attached it to the feet as sacrificial boards that could be replaced. I cut each leg about a inch then added the coaster board to the end. Great project
That's a great idea. Most treated 2x4s you buy are not actually rated for direct soil contact so that would be a good way around it. Thanks for watching!
Now here’s an interesting strategy I hadn’t thought of. As friend I chatted with recommended I google Hyezmar’s book. I did and found many plans, but none like this, thanks!
Just built this bench and wow. So awesome to build something and when you’re done you sit down on it. Lol. I’m thinking those back braces could be notched out so they would sit back further and then allow the back boards and seat to align better but this was easy and straightforward. Love it!! I didn’t have a router and my jigsaw stopped working. Used and angle grinder to round the arm rests and then sanded them a lot with an orbiter sander. It’s not perfect but honestly gives it a more rustic touch so it’s all good. Thanks for the video!!
Thank you for this - I have made so many of these - sold some gave some away. I do Shou Sugi ban to finish them. Then stain or dye to order. The main part for me is the prep- cutting sanding rounding off edges then burning. If outside I burn to char then strip with a restorer. Then stain or dye, seal with Halycon total boat clear. Then assemble
You made a Good Simple Bench here, I like it. And will build couple of my own here this Winter , I'm thinking less then hundred dollars worth of lumber to build them both.... Thanks for Sharing with us....
You really make good videos illustrating how the job is done with a nicely done material list. These benches will be great for a rustic setting I'm putting together for outside. We are about the same age and we use the same methods of measuring and cutting. Again Thanks for the great video illustration.
mr soat Thanks again for your bench plans i am into 3 years i think and i built 5 bench's and 2 swing's and sat them on brick stones for protection keep bugs and water away painted them dark brown a nd they look same
I really like this design. I think I'll make one :) Need to customize it a bit, because I live in the netherlands and we have a bit different standard sizes for the wood :)
Thanks Soat Mon. Nearly finished my bench. I've used the 2 x 4 wood for arms, seating slats, back slats instead of 2 x 6 and I've never done any woodworking before. Have you made any round tables? Would be great to see.
For the arm rests, you can measure both pieces the same then flip one over to use for the left and right. Also, after you lay one out, cut it, then trace that design on the uncut piece for the arm rest. No need to measure out both pieces. Work smarter, not harder. :)
You should have used Kreg Jig Pocket Hole Joinery to join all of your framing together ! Much Stronger than just gluing and screwing with normal wood screws !!
With wood prices what they are now this would cost me about 70 bucks to make. Prices are crazy right now. I made 6 foot bench that used to cost 20 bucks with all materials it cost me about 110. (nails and glue...) cant wait for the market to correct
First of all thank you for your guidance on how to build these. I have plans for how to add to it to make a profit but the frame plan comes from you. May I have permission to use it for that purpose?
![$30 Outdoor Bench with Back [Only 3 Tools and 30mins]](http://i.ytimg.com/vi/y12psLC230I/mqdefault.jpg)
Watched absolutely 100s of how to build garden bench on UA-cam unfortunately most of them was not useful and the rest unclear or complicated , but the way you have explained it’s amazing, very easy , clear and smart.
Thank you 🙏
You are very welcome. Thanks for taking the time to let me know!
Just made this today. My first wood project. I'm delighted with it; thanks so much for laying it out so well. Keep up the good work.
That is awesome!! I am so happy to be a part of your first wood project. I hope this is the beginning of many successful projects for you. Thank you for letting me know.
I made lots of these unique benches and made a ton of cash. Thanks for this video. Such an easy bench to make.
That's awesome! Thank you for letting me know!
I built this today, turned out great. I used my table saw and a taper jig to cut the tapers, no sanding no planing.
Thanks for posting this!
Your welcome, glad it worked out for you.
I just finished making this bench. It took me about 5 hours, but that was because I kept coming back to the video to make sure I was doing it right. I'll make a couple more, and then make a few chairs by shortening the 48" boards to 26" or so. I did all the straight cuts with a chop saw, and the backrest and arm cuts with a jig saw. A band saw would make it easier, but really, you could do this project just fine with hand saws and sandpaper. This is the first DIY video I've ever seen that explained everything so well that I never had one minute of confusion. I wrote down the measurements, and all the steps as I did them, so now I have a written building plan in case I forget how to do something. Thank you for this video. I love the bench, even if it takes two men and boy to lift it. :)
You're welcome! Thanks for letting me know it helped you!
WHATS UP SOAT MAN ITS BEEN 4 YEARS SINCE I BUILT 4 OF YOUR BENCHES AND 2 SWINGS LOVE THEM ALL STILL THANKS AGAIN
That's Great! Thanks for letting me know!
Just finished my Garden Bed run for the year and was looking for new projects ....... NAILED IT !! Thanks so much for this video ! I always trust a glue and screw man !! Just sayin'. I retired 10 years ago and went in the hospital for a life saving operation .... then ANOTHER !!! I'm to much of an old War Horse to give up. I build things and sell them CHEAP. I like the idea of giving back for all the things people have done for me over the years .... makes an old man feel useful again !! Take care !! Thanks again.
That's great. I'm glad you liked it. I just became a grandpa this year so I'm not far behind you.
Just finished building it - took two weeks working on it a little each day during this shutdown. Used redwood and took my time sanding it down real smooth, going to finish it up with Danish oil tomorrow. Looks great, thanks so much!
That is awesome!
I just finished building this bench yesterday and found it very easy to build when I watched the video and took down all the measurements. The result is a very nice, very sturdy bench. Nearly anyone could build this with a minimum of power tools. The buy-list and cut-list are quite accurate. Hardly any waste or scrap wood left over. Cost me $40.18 for the pine lumber I bought at Home Depot. If you're not an expert woodworker, and you don't have a lot of money, don't be afraid to tackle this project.
That's awesome! I'm glad it worked out for you. Thank you for your encouraging words for others!
I just built this bench. You did a great job on your instructional video. I had no problem building this. You explained everything step by step. Thanks
Awesome! Thank you for letting me know!
I made one today and its perfect.
I did alter the standard European equivalent of 2 x 6 ans 2 x 4 Timbers to US dimensions and worked from your cut list .it was a project I did with my son and he enjoyed doing it as much as i did .
That is awesome! Thanks for letting me know! I'm glad it helped you and your son. Thank you for taking the time to teach your son how to build things!
Well Sir , today April 28 2019, I made a bench using your plan and it came out very good. All the measurements were accurate, Thank you. Now on the back rest I would extend about three inches on both sides on the top two pieces. I just completed mine and my daughter is asking me to make her one . Wow, I thank you for your time and your encouragements in making me so useful. Edward. God Bless.
Awesome, thanks for letting me know!
I have made about 7 of these and gave them away as gifts. I use the Japanese art form of Sugi Ban and use cedar wood. Looks amazing
Awesome! Thanks for letting me know!
@@SoatMon I forgot to tell you I also use wood dyes and stains over the sugi ban and it looks incredible. Thank you for giving me the easiest plans in the world it helped with my confidence.
Made one of these 2 years ago. Very easy instructions to follow. We all love our bench. Thanks a lot.
That's awesome, thanks for letting me know!
Made a couple of these for the fire pit. Turned out so nice I made 3 more. Thanks for posting! Very easy, and solid!
Awesome! Thanks for letting me know!
I came across this video the other day and have made the bench today. I just want to say thanks as the bench is great and your video made it very easy to make. Thanks again
You're welcome! Thanks for letting me know you liked it!
Me and my girlfriend are very new to wood working but we did this in a couple hours and it came out really awesome! Thanks
That's great!! Thank you for letting me know. I'm glad it worked out well, keep up the good work. Stick with it, I'm sure you have many more awesome projects ahead. Thanks for watching!
Love the clear instructions and the cut list. As well as the simple reclining back. I want to make it a seven footer for an afternoon nap.
Thanks Allen!
Simple and effective, strong and will last for ages, great build, well informed tutorial, I will be making one of these next weekend , I have just the spot, in the sun, we do get the sun a couple times a year so it's best to enjoy it , Lovely job thanks. From the UK 👍
That is awesome! I hope you enjoy building it. Thanks for watching!
Hi I built my bench from your plans, absolutely awesome. Mine didn’t come out quite as good as yours but I’m more than happy with it and it’s so solid. Thank you.
You're welcome! I'm sure yours turned out great. Thanks for letting me know.
Thanks for your video. I used the same design except changed the Arm rest , seat and back boards to 5/4 deck boards. I also increased the width from 48 in to 54 inches (the back rest 51In) and finally made the top back board the same length as the seat boards so it extends a bit and then rounded it off. Looks great and was easy to build. Thanks again.
Sounds like a great bench. I'm glad you enjoyed the video. Thanks for watching!
This is actually a very nice looking and comfortable garden bench. Pretty easy to build.
Thanks for the comment!
The video is very well done and easy to follow. No steps left out.
Love this. I’ve made two so far. I didn’t use treated wood but used a high quality stain and they’ve held up great!
That's awesome! Thanks for letting me know!
Just gave ny granddaughter her bench for her B day. 3 one got her done also found a swing plan that's easy and as ive finished my last one till spring i noticed i could have left the legs off your plan and used that for a swing oh well learn and live .The weather here is perfect for yard stuff so been changing my metal shed some so i can get to my saws finished mt son's swing for Christmas and got to make a a frame for that . Thanks again for your ideas and imfo .RD
That is a great idea, you're right, it would make a good swing. Thank you for letting me know that you made some! Good luck with your shed and other projects!!
Thank you so much! This is my favorite!
You're so welcome!
I just finished 2 benches they are easy and very sturdy. Thanks for the video.
Glad you like them!
Love the simplicity of this outdoor bench. Especially since I'm a newbie at building. Thank you. 👌
Thank you for your kind comment and good luck with your building!
Thank you very much! I just built 4 of these benches for my daughters graduation party. Great sturdy bench!
That is GREAT. Thanks for letting me know!!
Hi sir what equipment do you need for this
Just finished my bench and want to say thanks for great tutorial made it very easy as I am just beginner!! Goodman!!!
Thanks for letting me know. I'm glad it helped. Keep on building!!
Just finished mine, had lots of spare wood from a garage build, took me two hours to cut and build bench, very easy instructions, i made mine slightly longer to fit 3 people and included centre rails to combat bending.
Excellent, thanks for letting me know. I hope you enjoy it!
awesome job I've been looking for this easy park bench project for a long time
Thanks! Good luck with your project!
Thank you so much for your video.I made it. It was very easy and I am an amateur when it comes to this stuff. It took me three days to finished. However, I did Shou sugi ban, stained it red and applied linseed oil as a finish. It came out very nice.Planning to make a couple more.
That's awesome, I'm glad it worked for you. Thanks for letting me know.
Made one of these today, thank you so much for a detailed and easy to construct solid bench. One thing I found was that the cross braces for the legs should have been 23 1/2" an not 23" so I have a bit of an overlap. May be due to the slightly different timber sizes in the UK....but I can live with that..
That is great! I'm glad the video was helpful to you. I hope you enjoy your bench and thank you for watching my video.
Built one last weekend, I did a little bit of modification, my wife and I are both over 6ft so I made it higher. I compared to a camping chair for desired height. We are sitting at 20in so I made the legs 28in high. I might do even higher next bench as we like a higher arm rest too but easy enough to put a couple 2x4's under the arm rest to raise it. I also made it 12 in wider (60in vs 48in) by using 2x6x10's for seat/back instead of 2x6x8 (and one 2x4x10) and added a short 2x4 to the base middle to prevent sag. turned out wonderful, very nice plan. I will probably build a couple more. I might see if I can find a way to angle the seat slightly, I find a flat bench a little more uncomfortable vs one that has a slight decline towards the back.
Awesome! Thanks for letting me know!
And thank you for showing! Might go for this. So much easier than your official public bench though sits less of the population!
Good luck Heathcliff! I hope it works for you.
Finished this bench turned out Nice!! Your cut list you mention in the video we’re all spot on thanks so much keep the videos coming I’m learning a lot from you! Bravo!!
Excellent! Glad you had a good build. Thank you for letting me know the cut list was correct.
I had some scrap wood and your video was the first one I found that looked easy enough to build. The bench turned out great! The one change I would make is to extend the length of the legs to maybe 25" to raise the arms up a bit. Again, this was super simple and a heavy duty bench to add to my yard! Thank you!
You're very welcome. Thanks for telling me that you built one. You must be tall. I would like the arms higher also but it fits my wife and the kids perfect. Thanks for the comment.
Ive made3 benches now and a porch swing working on #4 bench and changed bench box to 2x6 i was having a bad day didnt want to go back yo hardware store for more wood so used what i had it worked great and it is sturdy .ITS FOR MY GRANDAUGHTER ,my wife ,my daughter got to build 1 more for son then iam done with those benches
man you are great .im new to wood work .you give me confidence ..and im kinda slow so you make it easy .please keep up the work ..thank you very much
You're welcome. I'm glad you enjoyed it. Jump in there and make one, you will be surprised how easy it is. Thanks for watching!
Nice job and great instructions! Going to have to make one to replace my weather-worn outdoor chairs.
Thanks, I'm glad you enjoyed it. I've had quite a few people make one, I hope you enjoy it. Thanks for watching!
Nice bench I like the fact that they are heavy they will stay put and wear better being that they are beefy. I made two benches some what like this years ago. I did notice the feet started to rot after 5 years due to the end grain was touching the ground. My fix for that was 5/8 decking boards cut in style like a coaster attached it to the feet as sacrificial boards that could be replaced. I cut each leg about a inch then added the coaster board to the end. Great project
That's a great idea. Most treated 2x4s you buy are not actually rated for direct soil contact so that would be a good way around it. Thanks for watching!
NEXT TIME YOU COULD PAINT USED MOTOR OIL ON THAT END GRAIN OLD RANCHERS TRICK THEY USE ON FENCE POST.
Great Job! Love how you walk us through the project. Thank you! Keep up the good work!
You're welcome. I'm glad you enjoyed it. Thanks for watching!
Soat Mon how can I get the plans for this project
Gene Torres I
Just made the bench,really pleased with the result!
Awesome, thanks for letting me know!
You have inspired me. I really like your bench. Gonna have to build one. Thanks 👍👍👍
You're welcome!
What a great bench! I’m definitely build something like this when I have time. Great job!
Thanks! I hope you get time to make one.
Great bench and easy to do as well. I make several benches as well and always have fun doing it. thanks for sharing.
Your welcome!
Now here’s an interesting strategy I hadn’t thought of. As friend I chatted with recommended I google Hyezmar’s book. I did and found many plans, but none like this, thanks!
I'm glad you liked it. Thanks for watching!
Just made this today and it’s come out awesome! Will definitely be making some more!
Great to hear!
Brilliant. Built one as 50 th wedding aniversary present for inlaws, thanks.
That's great, thanks for letting me know!
did this, and it turned out pretty good. will be trying again next weekend for a more perfect one. thanks for the help!!
Your welcome. I'm glad you made one, thanks for watching!
I just finished making this!!! The instructs are fantastic!!! Amazing Bench.....thanks!
Awesome! Thanks for letting me know! Glad it worked out for you. Hope you get many years out of it.
Nice work! Will be needing this in the spring! Say Hello to the donkeys!
Thanks!
Just made the bench thank you so much for the directions Great Job Keep up the good work
Awesome! Glad to help. Good luck in your future builds!
Just built this bench and wow. So awesome to build something and when you’re done you sit down on it. Lol. I’m thinking those back braces could be notched out so they would sit back further and then allow the back boards and seat to align better but this was easy and straightforward. Love it!! I didn’t have a router and my jigsaw stopped working. Used and angle grinder to round the arm rests and then sanded them a lot with an orbiter sander. It’s not perfect but honestly gives it a more rustic touch so it’s all good. Thanks for the video!!
That's awesome, thanks for letting me know. It sounds like you are very creative with your tools.
Thank you for this - I have made so many of these - sold some gave some away. I do Shou Sugi ban to finish them. Then stain or dye to order. The main part for me is the prep- cutting sanding rounding off edges then burning. If outside I burn to char then strip with a restorer. Then stain or dye, seal with Halycon total boat clear. Then assemble
Thanks for sharing your experience!
Thank you for taking the time to share your knowledge.
Glad it was helpful!
What a great job👍 just what you need in the garden 🤓.
Absolutely
great informative video! built this for a fathers day gift and he loved it. thanks for sharing!! subscribed..
That's Awesome! I am very pleased you made one and I'm glad he liked it. Thank you for watching.
I did too
Is this not freakin nice and well explain this is the 1st one I've watch that you can build from the video this is just awesomely done!
He explains it so well! I was thrilled.
I'm glad it helped. Thanks for letting me know!
Hey again i wish it was the year i made these i did 3 bench's and 2 swings . Thanks soat man MERRY CHRISTMAS
Merry Christmas to you too!!
You made a Good Simple Bench here, I like it. And will build couple of my own here this Winter , I'm thinking less then hundred dollars worth of lumber to build them both.... Thanks for Sharing with us....
You're welcome. We have really enjoyed ours. Good luck and thank you for letting me know you are planning to make some.
Very nice and simple. And they look good too. Thank you for sharing this!
+Glenn Felpel Your welcome. Thanks for watching!
Made two of them already, thank you so much.
Glad it worked for, thanks for letting me know!
You really make good videos illustrating how the job is done with a nicely done material list. These benches will be great for a rustic setting I'm putting together for outside. We are about the same age and we use the same methods of measuring and cutting. Again Thanks for the great video illustration.
- I LIKE THIS BENCH ! ! ! I'm gonna make it. Thanx 4 sharing.
You're welcome! Thanks for letting me know and good luck with your build.
Nice work... cheers from Houston Tx..👍😎
Thanks Juan!!
mr soat Thanks again for your bench plans i am into 3 years i think and i built 5 bench's and 2 swing's and sat them on brick stones for protection keep bugs and water away painted them dark brown a nd they look same
Great! Thanks for letting me know.
Thank you for this video! I have made three already and love them!
That is GREAT!! Thank you for letting me know, I hope you enjoy them!
Thank you im giving it a try this weekend
Good luck Alan I hope it goes well!
hi Soat Mon , I made one today, Real easy to make and very strong. Thankyou!!
Awesome, thanks for letting me know!
I really like this design. I think I'll make one :) Need to customize it a bit, because I live in the netherlands and we have a bit different standard sizes for the wood :)
i dig that hand scale, cool bench also
I'm glad you liked it. Thanks for watching!
This is great. I have some dwarf friends who need somewhere to sit and this fits perfect. Thanks.
You're welcome!
Can you please make some plans for this incredible bench. I'm sure a lot of people could benefit from them.
www.soatmon.com/2017/12/a-viewer-was-kind-enough-to-make.html
Really nice work .👍👍👍
Thanks!
Nice sturdy and ergonomic too!
Thanks!
Thanks Soat Mon. Nearly finished my bench. I've used the 2 x 4 wood for arms, seating slats, back slats instead of 2 x 6 and I've never done any woodworking before. Have you made any round tables? Would be great to see.
Glad you are getting started in woodworking! Keep up the good work!
You can do the (2) arm rests at the same time (on top of each other) then just flip one over....
That's a good idea. Thanks for watching!
For the arm rests, you can measure both pieces the same then flip one over to use for the left and right. Also, after you lay one out, cut it, then trace that design on the uncut piece for the arm rest. No need to measure out both pieces. Work smarter, not harder. :)
Thanks for the comment!
LOL Did anyone try to scroll up at first to see his face? Good video man.
Thanks!
I sat in one. It's extremely comfortable!
Great instructions! Thanks for sharing 👏👏👏
You are so welcome!
Good looking bench and very informative video thanks for posting
I'm glad you enjoyed it. Thanks for watching!
I like it. It's simple and nice looking!
Thanks!
Awesome video sir easy to follow.great work.zamora
Thanks!
Great instructions..im gonna make one this weekend.. thanks..
Very nice!! I will make one next week. I think i'll put a middle brace (2x4) in the seat frame though..
Good luck with your build.
I have built 3 of these and no middle bracing is required...unless the 'sitter is like 400+# ! As designed, it is very sturdy. Have fun!!
You should have used Kreg Jig Pocket Hole Joinery to join all of your framing together ! Much Stronger than just gluing and screwing with normal wood screws !!
Hi friend. Very good job, I like it very much. I will try to replicate it for my garden. Greetings from Chile
Thank you! Cheers!
Great job! Looks pretty easy too.
I'm glad you liked it. Thanks for watching!
I just made one and it was pretty easy with your drawings and the video. I was wondering if 1X6 would work instead of the 2X6?
It probably would but you might have to reinforce the seat depending on how bendy the 1x6s are. Thanks for letting me know you built one.
Liked your video. These would be good benches for sit around fire pit, after sealing of course. Thanks.
That would be a perfect use for them. Sounds very cozy. Thanks for the comment!
With wood prices what they are now this would cost me about 70 bucks to make. Prices are crazy right now. I made 6 foot bench that used to cost 20 bucks with all materials it cost me about 110. (nails and glue...) cant wait for the market to correct
Amen!
nice job you need to list them and how many size for people to follow
I made one of these and am painting it red. I will link a photo of it when I finish painting it. Thanks.
That's great! I look forward to seeing it!
I may do a video and give you credit on it because I don't know how to get the photo on here. I do know how to give you the video link.
First of all thank you for your guidance on how to build these. I have plans for how to add to it to make a profit but the frame plan comes from you. May I have permission to use it for that purpose?
Amazing and beautiful, thank you. God bless you.
You're welcome. God bless you as well!
Thank you sir great job ....is that treated wood I need to buy ?
Yes, it is
Very nice .
I will do it tomorrow.
Thank you for sharing.
Your welcome! I hope it works out for you. I have had several people make one. Thanks for watching and commenting!
Nicely done and heavy.
Thanks!