Hey Brad, great break down of the updated version features, loved the wierd stuff around Dylan on the old slow mo haha 😊this is all so clear and great content as always , thanks 🙏 !
Is there any way to disable the storyline function yet? I do most of my editing in the timeline. So those storylines are SUPER annoying for me. I've searched how to disable them, but I can't find a straight answer.
FCP is based on the magnetic timeline so that is how it works and there is no way to disable it. If the secondary storyline (the grouped clips above the primary storyline) bothers you. You can select all the clips in that group and lift them from the storyline by using the shortcut Option Cmd and the Up arrow. Hope that helps!
Thanks for the info. My issue is when I keep lifting clips from storylines, I end up with tons of storylines all over the place and it makes my timeline a mess!
Yeah no way to disable them unfortunately, but like I said, you can lift from the primary storyline (the shortcut is Cmd Option Up) and then you can do it again to lift it from the secondary storyline. That way you will just have the clips on top.
@@Brad_West Thanks for the info. I guess what it comes down to is I don't like the empty storylines cluttering up my timeline (after lifting clips from the storyline). In a large project, I'll often end up with multiple blank storylines, on top of other blank storylines. It's super annoying. I was trained on older FCP versions that didn't use storylines, and to me, those were far superior. I appreciate your explanations.
Coming from FCP I´m forced to work with Premiere Pro since two years in my new job and I hate it almost every day. Especially since I started using FCP again for my private work. The only thing I like about Premiere and miss in FCP is the AI Music function where I can expand or shorten music just by dragging the clip to the required lenght.
Hey Michael! It’s a pity you have to use both and can’t use FCP 😄 The music feature in Premiere is great though I must say. I’d love for Apple to bring that into FCP.
I kinda wanna check out the new updates but being in the middle of a huge edit I feel like I just need to wait lol. Maybe on 2 or 3 weeks I can check it out
I was hoping you knew how to use a tracker but how to use it when an object is in front of the thing you track and how to handle that to keep the track smooth....also when the track leaves the camera view....I don't know how to deal with both scenarios?
That's a little tricky and in some cases, you have to manually adjust the track frame by frame. You can do that by starting to track, stopping right before the object is obscured and then use your arrow keys to go one frame at a time, each time adjusting the position of the tracking box.
@speliotis yeah and it’s only okay in my opinion. It works fine in VERY specific situations but it’s not something I feel like I can rely on. Keyper from FxFactory is pretty decent but I basically do any rotoscoping work exclusively with mRoto AI now.
Great! Please, "Please, do you know if there is a way to edit videos and make cuts through audio transcription? Like in Davinci or Premiere. Or even to make cuts in all the silent parts of the video? Thank you."
Thanks 😄 Well, not natively in FCP right now. But apps like Timebolt and Gling AI might be what you are looking for. Here's a video I did on Timebolt: ua-cam.com/video/RBhGI0hHURI/v-deo.html
Thanks for the video. Quick question for the feature 1 : if you are recording in D-Log or other flat format, is it working good ? You spoke about that in your vidéo but for someone who struggle with the Color Grading, is it helping to go in the correct way for obtaining a natural look (for example ) ?? Thx
I would suggest adding your D-Log conversion LUT in the inspector window, and then applying the enhance light and color effect. That should give you a really good starting point for a natural look. Hope that helps!
Yeah I think you can! I haven’t captured tapes in over a decade though haha. But this post in the FCP Documentation should point you in the right direction: support.apple.com/en-gb/guide/final-cut-pro/verd0e78a7e/mac
Are You Stoked Or What ?? That Was A Heck Of A Lot Of Useful Intel There Brother Man - Most Of These Options Are Above My Skill Set But I Appreciate The Slow Mo Action And The Drop Attributes Features - Question : Did You Purposely Change The Audio There Near The End For Effect ? Not Complaining By Any Means , Just Curious Enjoy The Rest Of Your Weekend With The Family , Cheers
They HATE US!!!! Ill tell you more. I went on apple communities and as soon as you put in Autocaptions or Auto Captions. NOT A SINGLE POST pops up. So I made one. And it was deleted within 15 minutes
@@Brad_West Thats why I said, they hate us! Because not only apple has the technology, EVERY cheap chinese app has the technology. Im not even mentioning that you can do word based editing in Davinci and Premier. But capcut, captions app with translation and lip movement. I can go on and on
Gosh danggit! I had an automatic update on my iMac and got the new update of Final Cut Pro before watching this video. So I wouldn't be able to go back to the previous version in order to create a zip file of version 10.7 would I?
@@Brad_West Dang! Well thanks for your insight and reply. So with this update, even if I have a disc drive with my iMac, I’ll still never be able to move my work onto a Blu-Ray going forward?
@@thescepterofjudah12 You will be able to if you have other Blu-ray disc writing software, but you won't be able to write to blu-ray directly from FCP. But if you keep a copy of an older version of FCP before updating, you will be able to export the final project from 10.8 and then create your Blu-ray discs from the older version by importing your export.
Yo Brad, applying the Enhance Light and Colour to multiple clips at once is a genius move. Haven‘t thought about this. Maybe because I was wrangling with it so much. :D
Thanks Eric! Yeah I wanted to see how well it would work as a "rough color grade" tool. I think this is going to be a super helpful feature for many people.
@@Brad_West Checked this morning. Burning is gone from there too. You can encode MPEG 2 and then send to a third party application. Speaking of, Roxio Toast Pro is currently half off if you need it…
Hey thanks, Does anybody know why my project icons always show as black when opening my library? FCPX 10.7.2 ? After I open the project it thens makes an icon, but mostly all have black icons and are not "previewing" what is in that project? Is there a fix for this by any chance? Thank you!!
@@Brad_West no not yet bc I am in the middle of several big projects. This icon preview has been around for me for a while, the project icons do not show up until I double click them and open them... Weird
Before the update if I double klicked on a color correction in the video inspector it jumped directly into the effect. Now after the update it always wants me to rename the color correction/effect. Does anybody know how I can change this double klick setting?
I don’t think you can change it now that you can double click to rename an effect, but if you click on the little color icon on the effect, it’ll open up the effect.
Mine freezes every time I click a title in the viewer to edit the text. Used to do all text editing there no problem. Now I have to edit the text in the text edit window. Also Ken burns effect lags and is feeezy also. I have a Mac Studio with a good build. Anyone else having this?
Are you using a trackpad? Matthew O'Brien experienced bugs in the viewer window when using a trackpad, so I would highly recommend checking out his recent videos.
The same issue here! On-screen controls don't work properly. I can't move the text around with the cursor. It just won't move. Then you release and click somewhere in the viewer and the text jumps to the position where your cursor stopped. Very annoying! Other onscreen controls have the same problem. Yes, I'm using the trackpad which was always perfect. In fact I don't need any mouse at all! Well, this is weird. The first time I see that kind of obvious bug with a simple function. Are they checking what they're releasing after all?! This is a NATIVE SOFT!!
@@Brad_West I don't have a mouse, sorry. I watched the video from Matthew O'Brien that you mentioned. They recommend to turn off the tap-to-click function in the MacOS Settings. Well, I left a comment there: The problem with the on-screen controls and the trackpad could be kinda solved. You must not operate with three fingers but press the trackpad until you click and hold it like that moving the object in the viewer with a finger of the other hand. The same thing with just highlighting the text in the viewer. You press the trackpad until you click instead of tapping it as usual. It works like this for me. Definitely, it's not a solution but it's much better than to turn off the tap to click function.
@@vsevolodshpak1867 Yeah that's not ideal, but I'm glad you found a temporary workaround. Hopefully the 10.8.1 bug fix update will fix that problem. 🤞🏼
The 'draw mask' feature doesn't work since the 10.8 update. If i select the area with the pen tool, the Final Cut will stop working and won't be able to use any of the features. It works if you press and touch it instead of clicking with a touch on the trackpad, but it's still very slow. Does anyone know a workaround?
Matthew O'Brien discovered a bug with the Trackpad. The bug didn't seem to happen with a mouse. I'd suggest checking out his recent FCP 10.8 videos. You might find the answer you need 😄
My main issues are that "add freeze frame" still doesn't work correctly and at Apple they still don't know that Mongolian is a real language. I asked several times to add it to the language list in the captions but even in 2024 (!) it is still not added. This new version of FCP looks more like a beta version.
@@Brad_West Thank you for helping. "Hold Frame" isn't very practical for my workflow. I remark that "Add Freeze Frame" is a problem when I apply it to the last frame of a clip. When I apply it somewhere else in a clip it seems to work. It's a workaround, but is works. Thanks again.
Yeah you’re not going to be able to get the same results with slow mo compared to actually shooting in slow motion. But there are some shots that it will work on in a pinch.
I just downloaded it today and so far, not too impressed. It’s more of the same that everyone wants instance satisfaction and not put in the work. I tried to color enhance and it was really weak, yeah if you are on a super tight deadline and you don’t have time, not bad, but like anything if you want quality you have to put in the time. Just like jump cuts. When I taught an editing class some years ago, this was not accepted, it was considered lazy and would drop you a letter grade, now that is the norm and is used on every video out there.
Check out my Color Grading Masterclass 👉🏼 bit.ly/BW-ColorGradingMasterclass
Aw shucks! I made the cut!
Great breakdown brotha!!
I've got so much footage of you now. "The TRUTH About the Final Cut Bro Part 2" coming soon. 🤣
Thank you Brad, didn't even know 10.8 was out today!
No problem! Don’t forget to backup your current version for safety’s sake!
Seeing me in slow motion made me realize I make a really dumb face when catching a football.
Great breakdown, Brad! 🙌
Haha 😆 That’s not your normal face? Thanks for watching man!
Awesome tuto as usual
Thank you for watching! Cheers!
An excellent overview of the update. Thanks Brad.
You’re welcome. Glad you enjoyed it. 😄🤙🏼
Hey Brad, great break down of the updated version features, loved the wierd stuff around Dylan on the old slow mo haha 😊this is all so clear and great content as always , thanks 🙏 !
Glad you enjoyed it! Thanks Dénes! 😄🙏🏼
requested auto captions too! About the only thing that is missing imo. Great video as per
Thanks Tom! Yeah auto captions would be such a great addition 😄🤞🏼
Is there any way to disable the storyline function yet? I do most of my editing in the timeline. So those storylines are SUPER annoying for me. I've searched how to disable them, but I can't find a straight answer.
FCP is based on the magnetic timeline so that is how it works and there is no way to disable it. If the secondary storyline (the grouped clips above the primary storyline) bothers you. You can select all the clips in that group and lift them from the storyline by using the shortcut Option Cmd and the Up arrow. Hope that helps!
Thanks for the info. My issue is when I keep lifting clips from storylines, I end up with tons of storylines all over the place and it makes my timeline a mess!
Yeah no way to disable them unfortunately, but like I said, you can lift from the primary storyline (the shortcut is Cmd Option Up) and then you can do it again to lift it from the secondary storyline. That way you will just have the clips on top.
@@Brad_West Thanks for the info. I guess what it comes down to is I don't like the empty storylines cluttering up my timeline (after lifting clips from the storyline). In a large project, I'll often end up with multiple blank storylines, on top of other blank storylines. It's super annoying. I was trained on older FCP versions that didn't use storylines, and to me, those were far superior. I appreciate your explanations.
Wow, that's amazing! The major updates to Final Cut Pro are incredible. I absolutely love it!
Glad you like the updates! Thanks for watching 😄💪🏼
Coming from FCP I´m forced to work with Premiere Pro since two years in my new job and I hate it almost every day. Especially since I started using FCP again for my private work. The only thing I like about Premiere and miss in FCP is the AI Music function where I can expand or shorten music just by dragging the clip to the required lenght.
Hey Michael! It’s a pity you have to use both and can’t use FCP 😄 The music feature in Premiere is great though I must say. I’d love for Apple to bring that into FCP.
Pretty dope updates 🫡 Cheers man!
Yeah some decent little updates in this version!
Thanks again for being an epic resource in all things FCPX Brad!
My pleasure! Thanks for watching 😄🤙🏼
I kinda wanna check out the new updates but being in the middle of a huge edit I feel like I just need to wait lol. Maybe on 2 or 3 weeks I can check it out
Oh yeah, definitely don't update in the middle of an edit 😅 I'm getting second hand stress at the thought of that!
Thanks for video. Looks like you don’t use color finale anymore. Just curious; why? Cheers and keep up the good work.
Thanks! Glad you enjoyed it. I do. I just often use the built in tools for tutorials so that more people can follow along 😄💪🏼
cheers mate !!! question: if do the update, colorfinale would work ? thx
Yeah, Color Finale still works for me with the update!
Thanks Brad for the INFO
You're welcome!
thanks Brad
You're welcome!
i think it's cool these updates. :)
Agreed!
I was hoping you knew how to use a tracker but how to use it when an object is in front of the thing you track and how to handle that to keep the track smooth....also when the track leaves the camera view....I don't know how to deal with both scenarios?
That's a little tricky and in some cases, you have to manually adjust the track frame by frame. You can do that by starting to track, stopping right before the object is obscured and then use your arrow keys to go one frame at a time, each time adjusting the position of the tracking box.
@@Brad_West ok thank you
I was looking for Masking features... tracking a subject and eliminating the background
MotionVFX’s mRoto is probably the best option out there for that. Unfortunately there is no built in notion to do that right now.
@@Brad_West Hey Brad. There is a scene Removal Mask in the new version 10.8 have you seen this ?
@@Brad_West ua-cam.com/video/xjFUG9YQlP4/v-deo.htmlsi=Eeg5HFJUWKUK_p7h
@speliotis yeah and it’s only okay in my opinion. It works fine in VERY specific situations but it’s not something I feel like I can rely on. Keyper from FxFactory is pretty decent but I basically do any rotoscoping work exclusively with mRoto AI now.
@@Brad_West Thank you Brad...
Great! Please, "Please, do you know if there is a way to edit videos and make cuts through audio transcription? Like in Davinci or Premiere. Or even to make cuts in all the silent parts of the video? Thank you."
Thanks 😄 Well, not natively in FCP right now. But apps like Timebolt and Gling AI might be what you are looking for. Here's a video I did on Timebolt: ua-cam.com/video/RBhGI0hHURI/v-deo.html
@@Brad_West thanks! 👏🏻👏🏻👏🏻
Been using Lumafusion for a few years and love the effects they offer. Is there a way to add more transitions to FCP on the iPad?
I don't think that is possible yet. But that may change in a future update.
Thanks Brad,
It does not performing "Smooth Slow Motion" with larger 4.0k clips such as 4.1K clips. Would you please try< thank you.
I don't have any clips larger than 4k. They might be a limitation, I'm not sure.
Thanks for the video. Quick question for the feature 1 : if you are recording in D-Log or other flat format, is it working good ? You spoke about that in your vidéo but for someone who struggle with the Color Grading, is it helping to go in the correct way for obtaining a natural look (for example ) ?? Thx
I would suggest adding your D-Log conversion LUT in the inspector window, and then applying the enhance light and color effect. That should give you a really good starting point for a natural look. Hope that helps!
@@Brad_West Yes, that helps a lot. I see what you mean. Thanks a lot for your quick answer. On that one you are the first 🤣
@@Mister_Raphy Haha no problem! Thanks for watching 😄
Nice, thank you for the review. Do you know if the ipad version the same as the mac version or do i have to buy the ipad one separate?
The iPad version is a totally separate app and it is a subscription. Thanks for watching! 😄
@@Brad_West oh no a subscription? Smdh, just bought ipad pro (comes in a few weeks)...i hate subscriptions. Maybe i'll just learn da vinci resolve. 🤷🏽
@goldbrick2563 Yeah the sub is like $5 per month if I’m not mistaken. But FCP for Mac is a once off purchase at least.
@@goldbrick2563 Yeah subscriptions aren't for everyone. I'd recommend trying both and seeing what you like best 😄
can you still capture mini dv footage in this version of final cut?
Yeah I think you can! I haven’t captured tapes in over a decade though haha. But this post in the FCP Documentation should point you in the right direction: support.apple.com/en-gb/guide/final-cut-pro/verd0e78a7e/mac
I love the idea of applying Enhance Light & Color to a rough cut - that’s a great idea 💡Solid breakdown, Brad!
Thanks so much Matthew! I’m definitely going to try using that as a rough grade technique on my next client video 😄🤞🏼
Doesn’t support 24 bit audio ? Also do you have built in luts for s log 3
It does support 24bit audio. I think there is an sLog3 LUT but I would just download the free one from Sony’s website and use that.
That’s dope 🎉
😄💪🏼
Can u please inform me which latest versions of Fcpx support to mac os monterey 12.7.6
You should be able to check that by “Googling FCP compatibility MacOS”
Is there any option for autocaption or do I need to wait till fcp11 😮
No auto caption yet. I would love to see that natively in FCP in the future.
Are You Stoked Or What ?? That Was A Heck Of A Lot Of Useful Intel There Brother Man - Most Of These Options Are Above My Skill Set But I Appreciate The Slow Mo Action And The Drop Attributes Features - Question : Did You Purposely Change The Audio There Near The End For Effect ? Not Complaining By Any Means , Just Curious
Enjoy The Rest Of Your Weekend With The Family ,
Cheers
Glad you like the new features Travis 😄👊🏼
Hello nice information but my final pro not showing inhance coler in auto colour correction icon..if anything to do....if reply i greatful to l you
What version of MacOS and FCP are you running?
They HATE US!!!! Ill tell you more. I went on apple communities and as soon as you put in Autocaptions or Auto Captions. NOT A SINGLE POST pops up. So I made one. And it was deleted within 15 minutes
LOL, so typical of Apple...
That’s really odd! I don’t see why it hasn’t been added yet. In my mind, the technology already exists in their ecosystem to make it happen.
@@Brad_West Thats why I said, they hate us! Because not only apple has the technology, EVERY cheap chinese app has the technology. Im not even mentioning that you can do word based editing in Davinci and Premier. But capcut, captions app with translation and lip movement. I can go on and on
@@Brad_Westwhen you realize CapCut has it on mobile and desktop 🤦🏾♂️
Didn’t know they deleted stuff.
I updated, but I don’t see the Smooth Slow-Mo option available 🤔
You need to have one of Apple’s M chips.
There’s no way to put video preview window vertically for editing vertical videos right?
You can't really move the windows around no. But vertical videos on a vertical timeline will display vertically.
Gosh danggit! I had an automatic update on my iMac and got the new update of Final Cut Pro before watching this video. So I wouldn't be able to go back to the previous version in order to create a zip file of version 10.7 would I?
No unfortunately not. Unless you have a time machine backup. I would recommend turning off automatic updates too!
@@Brad_West Dang! Well thanks for your insight and reply. So with this update, even if I have a disc drive with my iMac, I’ll still never be able to move my work onto a Blu-Ray going forward?
@@thescepterofjudah12 You will be able to if you have other Blu-ray disc writing software, but you won't be able to write to blu-ray directly from FCP. But if you keep a copy of an older version of FCP before updating, you will be able to export the final project from 10.8 and then create your Blu-ray discs from the older version by importing your export.
Hey Brad, is there a reason the smooth slo-mo wouldn't be showing up on my version of FCPX. I have the latest 10.8.1. Thank you.
The super slo-mo feature requires an Apple chip like the M1, M2, etc. Are you using an Intel Mac?
"Wow, Auto Caption and Magic Mask-thanks, Apple! Just dreaming 😂"
Haha I wish! I hope with the introduction of Apple Intelligence that we will stat seeing some of those features implemented in future.
Yo Brad, applying the Enhance Light and Colour to multiple clips at once is a genius move. Haven‘t thought about this. Maybe because I was wrangling with it so much. :D
Thanks Eric! Yeah I wanted to see how well it would work as a "rough color grade" tool. I think this is going to be a super helpful feature for many people.
well explained.
Thank you!
Hi Brad, thanks for this video.👍 For me it's now to say bye bye Final Cut Pro and welcome Davinci. The time for a change has come.
Yeah I don’t think you’re alone in that decision. I remain an optimist 😬🤞🏼
How did they let Capcut outdo them 😢.
The value CapCut provides is super impressive!
I just made the update but for some reason don't have the slow mo feature available to me. Any idea why that might be?
You need one of Apple's M1, M2, etc chips for the smooth slow mo feature.
I updated fcp but i cannot find smooth slow motion. It is not there. Does anyone know what can it be?
You need to have a Mac with one of Apple's M chips to have the smooth slow motion feature.
I don't found smoth slow motion not found in final cut
You need to have one of Apple’s M chips.
I'm not near my machine right now, but I would imagine that you can still use Compressor to burn a DVD
I don’t have Compressor, but I feel like that option would still be available. Let me know. 😄🤙🏼
@@Brad_West Checked this morning. Burning is gone from there too. You can encode MPEG 2 and then send to a third party application. Speaking of, Roxio Toast Pro is currently half off if you need it…
Hey thanks, Does anybody know why my project icons always show as black when opening my library? FCPX 10.7.2 ? After I open the project it thens makes an icon, but mostly all have black icons and are not "previewing" what is in that project? Is there a fix for this by any chance? Thank you!!
That's an odd bug. Have you updated to 10.8?
@@Brad_West no not yet bc I am in the middle of several big projects. This icon preview has been around for me for a while, the project icons do not show up until I double click them and open them... Weird
Before the update if I double klicked on a color correction in the video inspector it jumped directly into the effect. Now after the update it always wants me to rename the color correction/effect. Does anybody know how I can change this double klick setting?
I don’t think you can change it now that you can double click to rename an effect, but if you click on the little color icon on the effect, it’ll open up the effect.
Bravo, my friend everything is good but I don't understand why you are rushing?.
It’s just the speed at which I speak 😄🤙🏼
Mine freezes every time I click a title in the viewer to edit the text. Used to do all text editing there no problem. Now I have to edit the text in the text edit window. Also Ken burns effect lags and is feeezy also. I have a Mac Studio with a good build. Anyone else having this?
Are you using a trackpad? Matthew O'Brien experienced bugs in the viewer window when using a trackpad, so I would highly recommend checking out his recent videos.
The same issue here! On-screen controls don't work properly. I can't move the text around with the cursor. It just won't move. Then you release and click somewhere in the viewer and the text jumps to the position where your cursor stopped. Very annoying! Other onscreen controls have the same problem. Yes, I'm using the trackpad which was always perfect. In fact I don't need any mouse at all! Well, this is weird. The first time I see that kind of obvious bug with a simple function. Are they checking what they're releasing after all?! This is a NATIVE SOFT!!
@@vsevolodshpak1867 Is the bug still present if you test with a mouse?
@@Brad_West I don't have a mouse, sorry. I watched the video from Matthew O'Brien that you mentioned. They recommend to turn off the tap-to-click function in the MacOS Settings. Well, I left a comment there:
The problem with the on-screen controls and the trackpad could be kinda solved. You must not operate with three fingers but press the trackpad until you click and hold it like that moving the object in the viewer with a finger of the other hand. The same thing with just highlighting the text in the viewer. You press the trackpad until you click instead of tapping it as usual. It works like this for me. Definitely, it's not a solution but it's much better than to turn off the tap to click function.
@@vsevolodshpak1867 Yeah that's not ideal, but I'm glad you found a temporary workaround. Hopefully the 10.8.1 bug fix update will fix that problem. 🤞🏼
Does anyone have an issue with the 10.8 with the 2017 MacOS Virtual 13.6.7
To upload 20 minute video takes up to six hours?
Anyone can help ?
That’s insanely long!
The 'draw mask' feature doesn't work since the 10.8 update. If i select the area with the pen tool, the Final Cut will stop working and won't be able to use any of the features. It works if you press and touch it instead of clicking with a touch on the trackpad, but it's still very slow. Does anyone know a workaround?
Matthew O'Brien discovered a bug with the Trackpad. The bug didn't seem to happen with a mouse. I'd suggest checking out his recent FCP 10.8 videos. You might find the answer you need 😄
4th feature is not show in my fcpx
Do you have an M1, M2, or M3 chip in your machine? This feature is not available with Intel chips.
Спасибо, но у меня нет окна Smoot Slow Mo в 10.8. Все ясно, только для процессоров яблочных. Упыри
Yeah only for Apple chips unfortunately.
What about can you export aaf file ??
Unfortunately no AAF export unless you use a third party app like X2Pro.
@Brad_West final cut pro needs to do better then that. That should be a major thing to have for people that do sound mixing for there movies etc
Agreed 100%! A few years ago a did a video about the features I wish FCP and being able to export OMFs and AAFs natively was one of them.
@Brad_West can you send me a link as far third party app for aaf?
This is what I used for years when I was working on a TV show and had to send audio to Pro Tools.
x2pro.net
Good luck 💪🏼
My main issues are that "add freeze frame" still doesn't work correctly and at Apple they still don't know that Mongolian is a real language. I asked several times to add it to the language list in the captions but even in 2024 (!) it is still not added. This new version of FCP looks more like a beta version.
That's odd! Have you tried using a hold frame instead of a freeze frame?
@@Brad_West Thank you for helping. "Hold Frame" isn't very practical for my workflow. I remark that "Add Freeze Frame" is a problem when I apply it to the last frame of a clip. When I apply it somewhere else in a clip it seems to work. It's a workaround, but is works. Thanks again.
@@PaulVanCaesbroeck That's strange, but I'm glad you were able to find a workaround 😄👊🏼
Unfortunately, CapCut laughs at every FCPX update 😂
CapCut has a ton of great features, there’s no denying that 😅
I don't have the option of smooth Slow motion, am I the only one?
Do you have an Intel chip or one of the Apple Silicon chips?
@@Brad_West intel
@farahelaraby4742 The new smooth slow mo is only compatible with Apple silicon chips unfortunately.
I want direct pen tool
To be able to draw on your footage?
I don’t see the smooth slow mo
Yeah, I tried it today and it looked pretty awful! Once again Apple hypes everything like it’s the greatest thing since sliced bread!
@@donjohnsmusic3116 might be time to jump on the da Vinci resolve bandwagon
You need one of Apple's M1, M2, etc chips for the smooth slow mo feature.
@@Brad_West That's what I have. I shoot real 60-120 fps, you really can't duplicate that, like I said, it's more Apple Hype.
Yeah you’re not going to be able to get the same results with slow mo compared to actually shooting in slow motion. But there are some shots that it will work on in a pinch.
Ferst lol
First to have a 10.8 video out, first to comment. What's next? 😅
First to get canceled
@@TheFinalCutBro 😂😂😂
I just downloaded it today and so far, not too impressed. It’s more of the same that everyone wants instance satisfaction and not put in the work. I tried to color enhance and it was really weak, yeah if you are on a super tight deadline and you don’t have time, not bad, but like anything if you want quality you have to put in the time. Just like jump cuts. When I taught an editing class some years ago, this was not accepted, it was considered lazy and would drop you a letter grade, now that is the norm and is used on every video out there.
So true! You definitely have to put in time to get quality final products.
I literally just need auto cuts / editing....
That would be such a great feature!
Almost 40 days and still no fix to the bugs in 10.8
I know! Usually they arrive sooner!
Looks like FC less pro than even capcut... Just generation away
Yeah I’m still waiting for an update to come out that totally blows us away!
No captions or text based editing, really apple. I will stick with PP and Capcut
That's a feature we are all waiting for!