My krg xray on my woomera has the same problem with bolt extraction so krg has rubber orings on the posts so it goes back in at correct height. Cheers for the vids
That oneleaf nv100 plus scope and nv add on you showed is a ripper set-up after dark, i use one on a similar setup gun to yours but in 223 and it was super clear at night out to 200-250 meters dependent on the weather.
If you get the clip on NV scope, an IR torch is a must! Ive shot 60 foxes this year and all using the pard nv clip on with the extra IR torch, it will give you a lot further range and it also saves battery life in your clip on. I'm shooting a Tikka T3x pollyfade 223 with hand loads👌53grn vmax 🦊💥
I have the same XRS chassis and love it. Just putting out there that MDT now sells an adjustable butt pad for height and cant... not sure if that's your preference but want to make you aware of it. Cheers, mate!
Have you looked at the Accura Varminter 5-30 x56 with illuminated reticle. They're a Chinese made scope but an Australian company but the quality is quite impressive. I have one on my 6.5 Bergara and I can't fault it.
Thanks for another informative and entertaining video mate, was hoping you might be able to advise on a decent smith in Vic? Recently had a shit expierence with a smith doing a crooked thread job and really knocked the wind out of me.
It depends on what you want done, some specialise in repairs, some in builds... not all do the same work. Hit up HiCal Firearms if you're in central Vic.
When you say heavy, how heavy is it... I'm thinking of the same chassis for my Tikka T3X Varmint Hunter in .243. It already past the 5kg mark now with the 23.7' heavy barrel...bit of a bugger lugging it round the hills, but dead steady from the ute or of the bipood. I reckon the factory single stage triggers are great, albeit with a 1.5lb spring
"If you think this video was shiet - go make your own". Bwaaaaah !!!
That comment got it a like and subscribe on it's own. The fact he swears and tells it like it is is why I will keep watching!
I agree a bunch of bs
My krg xray on my woomera has the same problem with bolt extraction so krg has rubber orings on the posts so it goes back in at correct height. Cheers for the vids
That oneleaf nv100 plus scope and nv add on you showed is a ripper set-up after dark, i use one on a similar setup gun to yours but in 223 and it was super clear at night out to 200-250 meters dependent on the weather.
Excellent video, I have 308 Lithgow X-ray, same problem with bolt removal, the zip tie’s capital idea, will definitely use zip ties.
Nice shoota, good combo being big scope 22-250 and chassis. Be a good long range goat gun too. Thanks for another good video.
Great cartridge for a lot of things.
Nice build. The day night scope reveiw should be interesting as to what you can see at night, I have never had any experience with them.
If you get the clip on NV scope, an IR torch is a must! Ive shot 60 foxes this year and all using the pard nv clip on with the extra IR torch, it will give you a lot further range and it also saves battery life in your clip on. I'm shooting a Tikka T3x pollyfade 223 with hand loads👌53grn vmax 🦊💥
I have the same XRS chassis and love it. Just putting out there that MDT now sells an adjustable butt pad for height and cant... not sure if that's your preference but want to make you aware of it. Cheers, mate!
Any feeding issues using the 308 mag with a full 5 rounds in it? MDT says to run reduced capacity in 308 mags when shooting 22-250.
I’ve never had an issue
Thanks for sharing mate, love your content
You're welcome.
Have you looked at the Accura Varminter 5-30 x56 with illuminated reticle. They're a Chinese made scope but an Australian company but the quality is quite impressive. I have one on my 6.5 Bergara and I can't fault it.
Never heard of it. I'll have to check it out.
Thanks for another informative and entertaining video mate, was hoping you might be able to advise on a decent smith in Vic? Recently had a shit expierence with a smith doing a crooked thread job and really knocked the wind out of me.
It depends on what you want done, some specialise in repairs, some in builds... not all do the same work. Hit up HiCal Firearms if you're in central Vic.
@@fhckoutdoors thanks mate, appriciate it.
When you say heavy, how heavy is it... I'm thinking of the same chassis for my Tikka T3X Varmint Hunter in .243. It already past the 5kg mark now with the 23.7' heavy barrel...bit of a bugger lugging it round the hills, but dead steady from the ute or of the bipood.
I reckon the factory single stage triggers are great, albeit with a 1.5lb spring
At the moment its about 7kg.
Ive got 2 as prs rifles in the mdt xrs, its a good comp chassis, i dunno about a carry rifle though, they aren't light weight.
Definitely not a carry rifle.
good vid as usual.
how's the 9.3x62 going? keen to see some more on that front as this calibre has recently sparked my interest.
Havent even started it haha. I will do a 9.3 ballistics video shortly though.
@@fhckoutdoorsnice! looking forward to it.
10mm drill bit depth collars or stops work perfectly for the cheek rest posts. cheap as chips!
Fantastic idea!
For the cheap and non-lathe owners, stack of washers will do it too
Not shitting on armytek but olight oden is my go to
I've got a lot of Olights. SO far this Armytek seems to be stacking up against them.
If only 22-250s came out in 1-8 twist as (1 in 12 as well) standard twist rates from the factories...
Pretty sure there is a Ruger American that comes in 1:8.
How much do you want for the old tikka stock
Already sold mate.
🤤
Go 30”. 22-250 likes it.
That's one long boy.