Easily modifiable with regular arduino indeed. But requires proper power circuitry for arduino - otherwise it can reboot when solenoid fires (drains a lot of electricity and overall board voltage may go too low for a moment). And the most useful feature is not unlimited full-auto, but a shots counter. When given to kids and random people (in a controlled conditions) they all tends to dry-fire when drozd is out of BB's.
Yep, usually done with a capacitor and a diode to isolate it from source. Counting shots and blocking dry-fire when it reaches 0 could be done without screen.
Can you make the trigger mechanism for me. I currently don't have the facility to fabricate one. The cylinder and pipe I can get here. Or do you have documentation of the parts.
This guy probably has the most on the Drozd ua-cam.com/channels/v_vuhP5Y4KXLVWGywLVE1w.html Mason Dawson. He's got mods up to 3k, spares (o-rings n such), auger mag feeders, barrel ext and air tanks (pretty much essential for full auto fun)
stuff's expensive. i plan on making my own barrel and probably suppressor once it gets warmer out. with an arduino, i should be able to make it fire at whatever rate i want
to be honest i didn't even look at his stuff for more than a second at this time. pretty busy. just saying everything i've seen so far costs a ton for what it is. and when you can make it yourself : p thanks for the link though. will check it out when i have time
Swan Donovan sure sure, but when you do mod it, I'd highly recommend an auger fed mag (30 rounds just don't cut it lol) and with that an air tank as co2 will freeze up the valves super quick 😎
so i've read. although they say the auger load mag can't keep up with really high fire rates, and that the spring feed is actually better. and i was aware of the 600rpm full auto co2 freezing. was considering modifying the magazine to take hpa, but as i only have the one mag, think i'm going to do the rof mods first and then see where i'm at
@@ahmedfocak5691 I have a lot of interests, so I'm constantly working on different projects. They just haven't related to air guns lately, which is what this channel had become about, so I haven't posted any it
donaldeugenepierce1@gmail.com I'm looking for one to buy so I can modify and upgrade as a project for my son to have. I've just gotten into building air rifles over the past couple years and it would be a great project 👌
Easily modifiable with regular arduino indeed.
But requires proper power circuitry for arduino - otherwise it can reboot when solenoid fires (drains a lot of electricity and overall board voltage may go too low for a moment).
And the most useful feature is not unlimited full-auto, but a shots counter. When given to kids and random people (in a controlled conditions) they all tends to dry-fire when drozd is out of BB's.
I'd be there only one using it, and wouldn't want to add a screen. I'd think a capacitor would prevent the shut-off as well
Yep, usually done with a capacitor and a diode to isolate it from source.
Counting shots and blocking dry-fire when it reaches 0 could be done without screen.
@@shurmurray true, but the plan was to convert to hpa, so with the ability to refill in my garage, would have been no big deal
Can you make the trigger mechanism for me. I currently don't have the facility to fabricate one. The cylinder and pipe I can get here. Or do you have documentation of the parts.
This guy probably has the most on the Drozd ua-cam.com/channels/v_vuhP5Y4KXLVWGywLVE1w.html Mason Dawson. He's got mods up to 3k, spares (o-rings n such), auger mag feeders, barrel ext and air tanks (pretty much essential for full auto fun)
stuff's expensive. i plan on making my own barrel and probably suppressor once it gets warmer out. with an arduino, i should be able to make it fire at whatever rate i want
Swan Donovan yeah he's pretty spendy, I just thought it may give you some ideas or point you in the right direction 😎
to be honest i didn't even look at his stuff for more than a second at this time. pretty busy. just saying everything i've seen so far costs a ton for what it is. and when you can make it yourself : p thanks for the link though. will check it out when i have time
Swan Donovan sure sure, but when you do mod it, I'd highly recommend an auger fed mag (30 rounds just don't cut it lol) and with that an air tank as co2 will freeze up the valves super quick 😎
so i've read. although they say the auger load mag can't keep up with really high fire rates, and that the spring feed is actually better. and i was aware of the 600rpm full auto co2 freezing. was considering modifying the magazine to take hpa, but as i only have the one mag, think i'm going to do the rof mods first and then see where i'm at
Hows it runnin
When will you post next video?
Who knows. I've been really busy with other projects lately
@@swandonovan ok, i thought this channel is dead, so happy to see the next video if you upload
@@ahmedfocak5691 I have a lot of interests, so I'm constantly working on different projects. They just haven't related to air guns lately, which is what this channel had become about, so I haven't posted any it
@@swandonovan I'm still checking in
Can I contact you directly, I have a request
You just have
@@swandonovan still checking in
How much would you sell it to me for?
Not sure
donaldeugenepierce1@gmail.com I'm looking for one to buy so I can modify and upgrade as a project for my son to have. I've just gotten into building air rifles over the past couple years and it would be a great project 👌