Thank you for the video. Where I especially appreciate it, is because, you're the only one that tries to explain each step and why, so that dummies like me can better understand what we are doing. Other channels are telling people to do as I do with no explanation as to why. As you imagine, it's not good if you don't understand why you are "doing or not doing" things.Thank you again. (And I gave a "Like" and I subscribed.)
Best bios settings video for X670 matherboards from Asus. Thanks a lot ... I don't have time to ting about these settings and play with them, rebooting my PC every now and then. I DONT HAVE THE TIME FOR THAT! Very helpful video !!! Every manufacturer, always has something different in mind, different concept etc. You make a very Good point that if something seems uncertain , its better to set it to auto in a few settings, in addition to ENABLED, there is sometimes a MOTHERBOARD settings and then it is worth using it. A least thats what Gigabyte has. I have a Ryzen 7950x3D and Asus ProArt X670. Great introductory guide, well done ❤
Hey man this video was really informative to watch! I just ordered this exact motherboard and a Ryzen 7 7700x. I'd really like to see follow up videos when new bios updates come.
@@d-wall hey man are you having any trouble with using expo on your system? I have the g.skill trident z5 6000 CL36 kit. I tried each stick individually and neither was able to give me expo. when i enable it I cannot boot into the system I can barely even boot into the bios. when I eventually do get into the bios its extremely slow and stuttery I was thinking it could have been the ram but the more I look around the more I wonder if its actually the motherboard itself especially since both sticks did the same thing when tested one at a time.
After having now bought 7600X and Hynix kit I'm running 6400CL30 with 2133FCLK. In the video i noticed your uncore was in 1:2 mode which is default over 3000 UCLK (6000Gbit memory). You should also set that to 3100/3200 according to what your CPU can do and have the IF run in 2:3 the speed of the 1:1 Uclk and memory for absolute best performance. One interesting thing to note is that i also have the "ROG" profiles on my TUF B650 mobo. Unluckily for me i get bootloops with them so they don't work for me, even though i can manually tune my kit to 6400 without issue. But long story short, you should run with 2/3:1:1 for IF:UCLK:MCLK for optimal performance, by checking off the UCLK=MCLK mode under RAM timings in bios.
That is bad advice abouit updating to latest bios . The latest one for crosshair x670 didn't like it had to go one down . With my Strix it didn't like any it was in 0500 factory bios and only took 0705 .
I have the same motherboard with bios 0805. Surprise my, some important options seem to be missing. Example, I don’t have « SMT mode » option in « CPU configuration » menu. It is strange ? It means we can’t disable SMT if we want on this motherboard ? Also , some voltages are missing like CCD IOD…. Can you confirm this ? Thank you !
excellent Max. im not thinking into buying zen4. amd PBO is the easiest way to gain some performance without too much thinkering. im going to wait for zen43d/raptorlake and then will see if i make the upgrade (currently using zen3+dualrank bdie)
Will this work on Asus B650-A strix gaming wifi? With expo enabled, it will crash and reboot. With expo off on boots up in 8 seconds and does not crash.
Hi there, your video is interesting thanks for making it! I recently have a problemwith my new corsair vengeance ddr5 96gb ram (2 x48 in slots 2 and 4 on a rog x670e-e) I haqve updated to the latest bios and updated the mobo's drivers. My problem is that my system is saying I have 15gb usable and only 16gb installed. Is this possible with hardware / software incompatibilities? Or is it a mistake from the seller on amazon? Any info would be really helpful. I have tried putting them into slots 1 and 3 instead and I couldn't get it to display with that setup. So I am at a loss. Any ideas / thoughts would be welcome. (I also installed a ryzen 7950x and my gpu is a 3070 ti.) Thanks in advance.
I have a 5700x and a single rank 2x8 b-die ram running at 3733 cl14 tuned subtimings as well. @1.48v. It hovers around 54 to 55ns with around 56k bandwidth in Aida. What would be the latency if I could get the same RAM timings on alderlake?
I would like u to test IMC of raptor lake ddr4 gear1 before i buy it coz my 12600kf is maybe worst binned one will be nice to see if there is any change with 13th
Can anyone help me, I'm going with an AMD build based on an ASUS x670e-e MOBO I don't see a single AMD board that supports over 6400 mhz DDR5. If I buy anything over that is there an update to their BIOS to support it?
I have 7600x Asrock x670e pro rs Ddr5 patriot viper venom 6000MHz, but I want to change memory to G Skill 6400MHz. Wath do you think, ist will working?
I accidentally bought corsair DDR5 dominator 5200 c40 ram / Intel optimized, Can I still use it in my AM5 build? I have the asrock steel legend X670e, 7900 x cpu?
hello mate, do you think aorus master b650e is good? or maybe the msi carbon wifi x670e. because the asus strix x670e e doesn't have the ram i bought in the QVL list and they seem to have very little ram support
@Hardware Numb3rs just ordered 2x16GB Trident Z5 NEO Black, CL32, F5-6000J3238F16GX2-TZ5N. At 6000 MHz, it should quite well be good enough with ryzen 5 7600x. And according to the QVL of the ROG Strix X670E-F, it's tested!
@@HardwareNumb3rs thanks for the idea! Will reply back with the result when everything is assembled, and don't forget to reply xD Didn't wanna order the 7800x3d as it is about 2.3x more expensive. At 1080p, a much too big investment.
Hello. Yesterday I tried just swapping my 7600x to a 7950x, and the board wouldn’t post (displays on but black) and the Qcode was 64-cpu dxe initialized. And just sat there. After 20 mins I tried to restart it and it again hung up on qcode 64. I suspect it’s something with the memory. I put the 7600x back in and it posted right away. Any ideas from you or anyone? Should I set all the memory tuning to auto and try again?
KINGSTON Fury Beast 64GB (2x32GB) 5600MT/s DDR5 CL40 XMP (KF556C40BBK2-64) 2x for 128GB ASUS ROG STRIX X670E-E GAMING WIFi works fine with 2x32gb....doesn't boot with 4x32...please help :) CPU 7950X
i got my rams working at 6600mhz 30-38-38 1T , with Asus X670E-F, Gskill 32gig memory, but for some reason my i cant change my timings, maybe new bios firmware bug.
I had a Crosshair VIII Extreme X570 ($875USD) and a R9 5900X, but decided to send that EXTREMELY EXPENSIVE Crosshair VIII Extreme mobo back, and get a X670 mobo and update to the 7950X. It seemed like a better situation if I'm going to OVERSPEND on tech, I might as well get ahead of the curve, instead of being on last gen architecture. So right now, I am back on my old mobo (Aorus Master X570), and my current 5900X cpu. However, I am having a very difficult time deciding on a new X670E mobo. I will NEVER buy an ASRock board, and don't really like the MSI boards either. I usually only buy Asus or Gigabyte, but have had better performance on the Asus boards. At first I wanted the Crosshair X670e Hero, but $700 dollars is STILL too much for a mobo, in my opinion. However, as I've researched it, unless i'm missing something, the Strix x670e-E is a better board for $200 dollars less. The ONLY thing that the Hero offers better is the two USB 4.0 ports, and the Strix E actually offers MORE usb ports on the rear I/O. So I'm looking for any advise to this decision, and if anyone see's an advantage or disadvantage with either that I've missed, please chime in.
I just went on a months long journey trying to decide between this, and the Aorus master x670e as well. I ended up choosing this one for the exact same reason you said. Better read IO and more PCIE 5.0 drive support.. you can also add the thunderbolt 4 add in card of you want more USB c
@@Silverturky Yeah, I also ended buying this board, a 7950X and 2x32G GSkill TridentZ NEO 6000 DDR5. This system is very powerful and well rounded for many different applications.
@@HiiiCee It's feature rich, and very solid performance wise across the board. Much better experience than my old board. And the 7950X just can't be beaten...
One thing I like about apples is that there are so many different kinds. Some look totally different and taste the same and some look similar and taste totally different. In England the most popular is the Royal Gala which is sweet and crispy.
Asus X670E-E GAMING WIFI motherboard I changed memory to G.SKILL F5-6000J3636F16GX2-TZ5NR approved by ASUS for this board and that fixed all my problems. Could not load BIOS 0705 or 0805 = FIXED. INTEL i225v3 Ethernet gave trouble sometimes = FIXED.
@@HardwareNumb3rs ok. can i look them up on a third part website or a forum? i am going to buy a 2x32GB 6000 cl30 gskill kit with sk hynix m dies and want to toghten the timings even more. i just dont know how to deal with the dual rank timings.
@@HardwareNumb3rs too bad it has really bad QVL list for ram, like it doesn't even have the AMD recommend EXPo ram ( G Skill cl30 6000mhz) that's a massive put off
First set you uclk mode to 1 to 1 not 2.1 like you have hence your uncore running at 1500. Second set pbo to enhanced and use the algorithm and set docp to coincide with that algorithm. Third no reason to run actually ddr faster than 6000 as per ya video not muched gained better to jump the bclk up a couple notches will gain you more in uncore and fclk. 4th set ya fclk to maximum 2133. 5th with your nvme in second slot your graphics cars is probably not running at 16x per the manual. 6th there is a new bios 870 cap I believe. Other than that, learn the board a little more as I have my 7950x running @6.115 @ 41c ok video actually is all.
Hi guys for me the big help was when I found out Memtest86+ and OCCT also AIDA these test tested my system and I also found out that my system super unstable at 6000 Mhz I tried everythin I mean everything doing DOCP I, II, DOCP Tweak fo Asus rising up the voltage, lovering it, Ai Overclock, Curve optimizer negative offset 20 , positive offset 20, undervolting the CPU to 1.3 Volts I mean everything set manually tryed to set also infinite fabrick for rams , Enhancemnet mode for CPU. Spent almost 2 months and my system remains stable only at 5600 Mhz , also at 4800 Mhz super stable I mean this freqvency is the most stable boot up time max 10 seconds with Windows 11 Pro ! For me with the AMD 7950X CPU is a big no for 6000 Mhz not stable, system crash restart BSOD and all the errors you can imagine ! What is the 6000 Mhz marketing nonsense to rob people about paying more for and getting nothing instead is a big question going above 5600 Mhz my personal advice is a nonsense not a huge advantage maybe few drops of FPS around 3-4 FPS in gaming ! Increased my voltage 1.3 Volts about 5800 Mhz for the memory my system not stable again multiple errors crasches fails in Memtest 86+ V6.20 also for OCCT test ! My rams Kingtson Fury Renegade 6000 MT\S timing CL 32-38-38 with latest bios upgrade 1415 from ASUS ! Not runing cheapo system currently running with Sapphire 7900 XTX NITRO+ Vapor-X , Seasonic 1000W PSU should be more than enough, ASUS GT502 case enough ventilation for the hole universe, EVGA CLC 360 for the CPU, 11x 120mm fans, 3x HDD 4TB and 4x SSD NVME Samsung 990 PRO, Motherboard ASUS ROG STRIX X670E-F GAMING WIFI ! I would go with 6400 MT\S for the rams but what's the reason behing if my system is unstable ? Wasting my time and money that's for sure I don't think that EXPO would resolve this problem buying another kit of rams from KINGTSON Fury BEAST 6000 MT\S CL 36-38-38 with EXPO certificat ! It would be interesting seeing your memtest 86+ result or OCCT memtest stability AIDA 64 Stability test around 30 minutes after this video, also from all the peoples comments below that there system is now super stable I don't think so I highly suggest them to memtest86+ and system stability test from AIDA 64 and also OCCT test these always shows the truth about system stability and crashes ! Good luck for everyone !
Thank you for the video. Where I especially appreciate it, is because, you're the only one that tries to explain each step and why, so that dummies like me can better understand what we are doing. Other channels are telling people to do as I do with no explanation as to why. As you imagine, it's not good if you don't understand why you are "doing or not doing" things.Thank you again. (And I gave a "Like" and I subscribed.)
Overclocking by memory manufacturer is a pretty slick feature.
Great video buddy, good balance between beginner and intermediate.
Best bios settings video for X670 matherboards from Asus. Thanks a lot ... I don't have time to ting about these settings and play with them, rebooting my PC every now and then. I DONT HAVE THE TIME FOR THAT! Very helpful video !!! Every manufacturer, always has something different in mind, different concept etc. You make a very Good point that if something seems uncertain , its better to set it to auto in a few settings, in addition to ENABLED, there is sometimes a MOTHERBOARD settings and then it is worth using it. A least thats what Gigabyte has. I have a Ryzen 7950x3D and Asus ProArt X670. Great introductory guide, well done ❤
Best bios update video on UA-cam you’re very good at explaining things keep up the work
I love RAM tweaking with Zen. These are some of your number one videos.
The issue none of Asus boards or even AM5 boards support 4 dims of ram
Hey man this video was really informative to watch! I just ordered this exact motherboard and a Ryzen 7 7700x. I'd really like to see follow up videos when new bios updates come.
That’s exactly what I have!
@@d-wall hey man are you having any trouble with using expo on your system? I have the g.skill trident z5 6000 CL36 kit. I tried each stick individually and neither was able to give me expo. when i enable it I cannot boot into the system I can barely even boot into the bios. when I eventually do get into the bios its extremely slow and stuttery I was thinking it could have been the ram but the more I look around the more I wonder if its actually the motherboard itself especially since both sticks did the same thing when tested one at a time.
@@d-wall same haha on it right now
@@Silverturky What CPU and what Motherboard and other PC Specs??
I’m having issues enabling DOCP. System does not post, stuck in boot loops. I will try manually lowering the frequency and see if it helps
After having now bought 7600X and Hynix kit I'm running 6400CL30 with 2133FCLK. In the video i noticed your uncore was in 1:2 mode which is default over 3000 UCLK (6000Gbit memory). You should also set that to 3100/3200 according to what your CPU can do and have the IF run in 2:3 the speed of the 1:1 Uclk and memory for absolute best performance.
One interesting thing to note is that i also have the "ROG" profiles on my TUF B650 mobo. Unluckily for me i get bootloops with them so they don't work for me, even though i can manually tune my kit to 6400 without issue. But long story short, you should run with 2/3:1:1 for IF:UCLK:MCLK for optimal performance, by checking off the UCLK=MCLK mode under RAM timings in bios.
Straight to the point : )))
That is bad advice abouit updating to latest bios . The latest one for crosshair x670 didn't like it had to go one down . With my Strix it didn't like any it was in 0500 factory bios and only took 0705 .
good work king, love you
I have the same motherboard with bios 0805.
Surprise my, some important options seem to be missing.
Example, I don’t have « SMT mode » option in « CPU configuration » menu.
It is strange ? It means we can’t disable SMT if we want on this motherboard ?
Also , some voltages are missing like CCD IOD….
Can you confirm this ?
Thank you !
Good work!
excellent Max. im not thinking into buying zen4. amd PBO is the easiest way to gain some performance without too much thinkering.
im going to wait for zen43d/raptorlake and then will see if i make the upgrade (currently using zen3+dualrank bdie)
Will this work on Asus B650-A strix gaming wifi? With expo enabled, it will crash and reboot. With expo off on boots up in 8 seconds and does not crash.
Wait are you Overclocking 6000 MHz Ram to 6200/6400??? Or is the sticks your OC 6400MHz?? vThanks
Hi there, your video is interesting thanks for making it!
I recently have a problemwith my new corsair vengeance ddr5 96gb ram (2 x48 in slots 2 and 4 on a rog x670e-e) I haqve updated to the latest bios and updated the mobo's drivers.
My problem is that my system is saying I have 15gb usable and only 16gb installed. Is this possible with hardware / software incompatibilities? Or is it a mistake from the seller on amazon? Any info would be really helpful. I have tried putting them into slots 1 and 3 instead and I couldn't get it to display with that setup. So I am at a loss. Any ideas / thoughts would be welcome. (I also installed a ryzen 7950x and my gpu is a 3070 ti.) Thanks in advance.
Is it the Haze 15 Marshall amplifier in the background ? ;)
Hello when you gonna do video about dynamic oc switcher and advanced pbo settings ?
Thx. Are you going to benchmark 13900k vs ZEN4 and 5800X3D in WoW?
Yes!
Hello, I wanted to buy these two motherboard models and There is a processor AMD 7800X3D
ROG STRIX X670E-A
ROG STRIX X670E-F
What is your suggestion?
I have a 5700x and a single rank 2x8 b-die ram running at 3733 cl14 tuned subtimings as well. @1.48v. It hovers around 54 to 55ns with around 56k bandwidth in Aida. What would be the latency if I could get the same RAM timings on alderlake?
Just found your channel, was hoping to see a follow up to this as ive just got this board and cpu! Hope you are OK. Are you returning?
Hello, I too have this motherboard, it's a poor CPU overclocker like you mention on your video. I hope Asus fix this with a new bios update. :(
I would like u to test IMC of raptor lake ddr4 gear1 before i buy it coz my 12600kf is maybe worst binned one will be nice to see if there is any change with 13th
In gear 1 and ddr4 I was able to get to 4000 C16 easily
Do you need to overclock cpu to get memory stable?
Hi bro ! Ive a problem, i'm stuck in a0 qcode, i'm My movie z590-e , with blackscreen, can u helpme??
Can anyone help me, I'm going with an AMD build based on an ASUS x670e-e MOBO I don't see a single AMD board that supports over 6400 mhz DDR5. If I buy anything over that is there an update to their BIOS to support it?
I have
7600x
Asrock x670e pro rs
Ddr5 patriot viper venom 6000MHz, but I want to change memory to G Skill 6400MHz.
Wath do you think, ist will working?
I accidentally bought corsair DDR5 dominator 5200 c40 ram / Intel optimized, Can I still use it in my AM5 build? I have the asrock steel legend X670e, 7900 x cpu?
What timing profile should i use for corsair vengance?
I have the motherbaord and 2 32gb ram 6800mhz sticks, is there a posibility, to get the 6800mhz?
My crossahair 670e extreme is always having boot issues right now it boots gets to logon screen and restarts itself
11 month after release and new AGESA? new results? 😉
hello mate, do you think aorus master b650e is good? or maybe the msi carbon wifi x670e. because the asus strix x670e e doesn't have the ram i bought in the QVL list and they seem to have very little ram support
Asus is the best brand
@@RoyalAngel000 thats what she said
@@GoldenEagle0007 try the asus b650
@@RoyalAngel000 i have the gene
@@GoldenEagle0007 bruh
Do you recommend 2x16GB single rank? Torn between 2x16gb and 4x16gb
General rule is less the better, 4 sticks are much harder to tune vs 2
@Hardware Numb3rs just ordered 2x16GB Trident Z5 NEO Black, CL32, F5-6000J3238F16GX2-TZ5N.
At 6000 MHz, it should quite well be good enough with ryzen 5 7600x. And according to the QVL of the ROG Strix X670E-F, it's tested!
@@Boldimore yes, try the motherboard preset for 6200 with the tight timings and you’re good to go!
@@HardwareNumb3rs thanks for the idea! Will reply back with the result when everything is assembled, and don't forget to reply xD
Didn't wanna order the 7800x3d as it is about 2.3x more expensive. At 1080p, a much too big investment.
Hello. Yesterday I tried just swapping my 7600x to a 7950x, and the board wouldn’t post (displays on but black) and the Qcode was 64-cpu dxe initialized. And just sat there. After 20 mins I tried to restart it and it again hung up on qcode 64. I suspect it’s something with the memory. I put the 7600x back in and it posted right away. Any ideas from you or anyone? Should I set all the memory tuning to auto and try again?
try 1.3v on soc. in this vid voltages look high.
Top max
KINGSTON Fury Beast 64GB (2x32GB) 5600MT/s DDR5 CL40 XMP (KF556C40BBK2-64) 2x for 128GB
ASUS ROG STRIX X670E-E GAMING WIFi
works fine with 2x32gb....doesn't boot with 4x32...please help :)
CPU 7950X
i got my rams working at 6600mhz 30-38-38 1T , with Asus X670E-F, Gskill 32gig memory, but for some reason my i cant change my timings, maybe new bios firmware bug.
Any advice getting 128 GB to work on this machine? I have 4 Gskill sticks, bought pair of 2x32 GB. Sometimes it boots but mostly I get 0d error!
Does it work now?
@@ZVR178 it should work now after the latest MB firmware updates
what memory profile you choose? @@RahulVenugopal
I had a Crosshair VIII Extreme X570 ($875USD) and a R9 5900X, but decided to send that EXTREMELY EXPENSIVE Crosshair VIII Extreme mobo back, and get a X670 mobo and update to the 7950X. It seemed like a better situation if I'm going to OVERSPEND on tech, I might as well get ahead of the curve, instead of being on last gen architecture.
So right now, I am back on my old mobo (Aorus Master X570), and my current 5900X cpu. However, I am having a very difficult time deciding on a new X670E mobo. I will NEVER buy an ASRock board, and don't really like the MSI boards either. I usually only buy Asus or Gigabyte, but have had better performance on the Asus boards. At first I wanted the Crosshair X670e Hero, but $700 dollars is STILL too much for a mobo, in my opinion. However, as I've researched it, unless i'm missing something, the Strix x670e-E is a better board for $200 dollars less. The ONLY thing that the Hero offers better is the two USB 4.0 ports, and the Strix E actually offers MORE usb ports on the rear I/O. So I'm looking for any advise to this decision, and if anyone see's an advantage or disadvantage with either that I've missed, please chime in.
I just went on a months long journey trying to decide between this, and the Aorus master x670e as well. I ended up choosing this one for the exact same reason you said. Better read IO and more PCIE 5.0 drive support.. you can also add the thunderbolt 4 add in card of you want more USB c
@@Silverturky Yeah, I also ended buying this board, a 7950X and 2x32G GSkill TridentZ NEO 6000 DDR5. This system is very powerful and well rounded for many different applications.
@@AquaStevae how are you liking the board? i'm in the same position and can't decide on which board to get.
@@HiiiCee It's feature rich, and very solid performance wise across the board. Much better experience than my old board. And the 7950X just can't be beaten...
First! Ha! 😃
One thing I like about apples is that there are so many different kinds. Some look totally different and taste the same and some look similar and taste totally different. In England the most popular is the Royal Gala which is sweet and crispy.
Asus X670E-E GAMING WIFI motherboard I changed memory to G.SKILL F5-6000J3636F16GX2-TZ5NR approved by ASUS for this board and that fixed all my problems. Could not load BIOS 0705 or 0805 = FIXED. INTEL i225v3 Ethernet gave trouble sometimes = FIXED.
With this motherboard I have long ram training how do you fix it? I need faster boot times.
Mine is the same, did you find a fix?
Enable Memory Context Restore
Enable Memory Context Restore@@jakeis4lsu
will this also make temps low?
It is good with 7950X3D?
Yep
do msi mb have the same presets? looking to buy a msi x670e carbon
Unfortunately not, only Asus Strix and some TUF
@@HardwareNumb3rs ok. can i look them up on a third part website or a forum?
i am going to buy a 2x32GB 6000 cl30 gskill kit with sk hynix m dies and want to toghten the timings even more.
i just dont know how to deal with the dual rank timings.
@@Ginkoman2 join my discord (link in the description), we can definitely help you out easy 👍
Is it good for the gander
Buildzoid actually killed 7950x while memory tuning. Be carefull, maybe better wait for new bios versions.
P.S. please Ashran benchmarks :)
Buildzoid put too much trust in Asus auto voltages.
If my ram is 5200MHZ, should I change the frequency to 5200 or 5000 ?
5200
Actually ur fclk is suppose to be half of your ram speed so its 1:1
should if showed VRM temps
This board have overkill vrms, even under heavy load they got barely warm
@@HardwareNumb3rs too bad it has really bad QVL list for ram, like it doesn't even have the AMD recommend EXPo ram ( G Skill cl30 6000mhz) that's a massive put off
give new benchmark video!!!!!!!!!!!!!!!!!!!!
asus lies, their boards dont do what users set up. and they destroy am5 cpus.
First set you uclk mode to 1 to 1 not 2.1 like you have hence your uncore running at 1500. Second set pbo to enhanced and use the algorithm and set docp to coincide with that algorithm. Third no reason to run actually ddr faster than 6000 as per ya video not muched gained better to jump the bclk up a couple notches will gain you more in uncore and fclk. 4th set ya fclk to maximum 2133. 5th with your nvme in second slot your graphics cars is probably not running at 16x per the manual. 6th there is a new bios 870 cap I believe. Other than that, learn the board a little more as I have my 7950x running @6.115 @ 41c ok video actually is all.
Hello are you using the Asus Strix X670e-e motherboard with your 7950X?
@@gimbleguyyes
@@JoeMama-yl1ow which bios version are you using please?
@@gimbleguy right now 1602
@@JoeMama-yl1ow Thank you
Italian accent is funny. No offense, I like it :)
Help I did the exact same thing u did and my system dosent post anymore I have z trident 6400 ram and chose the Samsung 6400 preset 😢
Dona reset cmos with the button and start again from default, but this time use a Hynix profile 😁
Hi guys for me the big help was when I found out Memtest86+ and OCCT also AIDA these test tested my system and I also found out that my system super unstable at 6000 Mhz I tried everythin I mean everything doing DOCP I, II, DOCP Tweak fo Asus rising up the voltage, lovering it, Ai Overclock, Curve optimizer negative offset 20 , positive offset 20, undervolting the CPU to 1.3 Volts I mean everything set manually tryed to set also infinite fabrick for rams , Enhancemnet mode for CPU.
Spent almost 2 months and my system remains stable only at 5600 Mhz , also at 4800 Mhz super stable I mean this freqvency is the most stable boot up time max 10 seconds with Windows 11 Pro !
For me with the AMD 7950X CPU is a big no for 6000 Mhz not stable, system crash restart BSOD and all the errors you can imagine !
What is the 6000 Mhz marketing nonsense to rob people about paying more for and getting nothing instead is a big question going above 5600 Mhz my personal advice is a nonsense not a huge advantage maybe few drops of FPS around 3-4 FPS in gaming !
Increased my voltage 1.3 Volts about 5800 Mhz for the memory my system not stable again multiple errors crasches fails in Memtest 86+ V6.20 also for OCCT test !
My rams Kingtson Fury Renegade 6000 MT\S timing CL 32-38-38 with latest bios upgrade 1415 from ASUS !
Not runing cheapo system currently running with Sapphire 7900 XTX NITRO+ Vapor-X , Seasonic 1000W PSU should be more than enough, ASUS GT502 case enough ventilation for the hole universe, EVGA CLC 360 for the CPU, 11x 120mm fans, 3x HDD 4TB and 4x SSD NVME Samsung 990 PRO, Motherboard ASUS ROG STRIX X670E-F GAMING WIFI !
I would go with 6400 MT\S for the rams but what's the reason behing if my system is unstable ? Wasting my time and money that's for sure I don't think that EXPO would resolve this problem buying another kit of rams from KINGTSON Fury BEAST 6000 MT\S CL 36-38-38 with EXPO certificat !
It would be interesting seeing your memtest 86+ result or OCCT memtest stability AIDA 64 Stability test around 30 minutes after this video, also from all the peoples comments below that there system is now super stable I don't think so I highly suggest them to memtest86+ and system stability test from AIDA 64 and also OCCT test these always shows the truth about system stability and crashes !
Good luck for everyone !