It's not too bad, Jeffro...the hardest part is getting the rails out. The old O-rings tend to swell and stick in the intake. A little lube spray onto each injector, with a little rocking the rail back and forth while pulling...out they come! Thanks for watching!
Thanks so much for this, we have a 2006 Escape and the only thing different is it's right hand drive (Australian) so the accelerator cable doesn't cross over the engine.
Great video! Thanks! I replaced the spark plugs, ignition coils and working on replacing the intake manifold gaskets from your other video. Also did the valve cover gaskets while I was at it! For the o-ring gaskets, the mount bracket fasteners 2 nuts and 2 bolts seem stuck. How much can I torque them? I applied some Brakeleen. Nothing's budging. Should I try with a breaker bar?
BEST automotive how-to channel on the internet. 👍
I was terrified when i first started watching this video. When I got to the end. I thought, "Wait I can do that!" Thank you! very helpful!
It's not too bad, Jeffro...the hardest part is getting the rails out. The old O-rings tend to swell and stick in the intake. A little lube spray onto each injector, with a little rocking the rail back and forth while pulling...out they come! Thanks for watching!
@@GreaseMonkeyFever Thank you I appreciate that!
This really is... One of the best tutorials I've ever seen. Wow great work my friend!
Muchas gracias por compartir su conocimiento, este ha sido de gran ayuda.
Unbelievably well done and easy to follow. You just saved me $400-500.
Ditto. Super helpful and well done.
Excellent
Saved me so much in time and money. Many thanks for doing this and doing so well.
Great video, best educational how to video I've seen yet. Exactly what I needed. Thanks a million.
this is the best tutorial I ever have seen
Great info, no nonsense, thanks!
You've been a life saver in helping me fix up my own car for awhile now. Thanks man
Incredibly detailed and thorough video. Thank you.
Best tutorial ever !! Thank you so much!
Thanks so much for this, we have a 2006 Escape and the only thing different is it's right hand drive (Australian) so the accelerator cable doesn't cross over the engine.
2X speed will make you less angry.
Thanks, God bless you.
Excellent!
Very good video 👍
Thanks, Christopher...hope the vids helped you get the O-rings installed on the fuel injectors. Thanks for watching!
Great video! Thanks! I replaced the spark plugs, ignition coils and working on replacing the intake manifold gaskets from your other video. Also did the valve cover gaskets while I was at it! For the o-ring gaskets, the mount bracket fasteners 2 nuts and 2 bolts seem stuck. How much can I torque them? I applied some Brakeleen. Nothing's budging. Should I try with a breaker bar?
Good information.
What are the right sizes for the O-rings upper and lower?
Where is fuel pressure sensor for raíl?
Dam everything except how to reinstall injectors and rail :( Not it will be that easy...