Nice review and I got one same monitor. Like it, did't use a lot but checking. In movie mode it works in full 5,5 inch screen, but in Photo mode it displaying in mid center screen, showing all functions from camera screen (camera screen is OFF and in black when in photo mode). What do I need to do to see in full screen when makes photos? My camera is Sony ZV-E10 with 15mm F1,4 lens) . Thank you.
@@JonathanJScottFilms nice video :) I would also liked if you elaborate and test a little more about the fan noise. How little noise can you have if you reduce fan speed, and what nits does it need to be ? :)
Do you have speakers built into your lut5? Does the volume function control the audio volume coming out of the monitor or the headphone jack only? Does yours show monitor battery life left? And it definitely has fan noise even at setting 1. No noise at 0 but your brightness can't go high else fan kicks in.
Does this have an auto rotate feature?? I tried mine the other day for a vertical set up, but the image went upside down 😂 not quite sure how to sort this...
Is the top button programmable like the LUT7 Pro (ie button select pixel to pixel 1:1 view mode)? Or anyway you found to quickly switch between Zoomed in view (ie to focus at 400%) and 1:1: view. I normally use this as a quick button press to switch on/off Zoomed In modes. Thx J
You can adjust it manually. The brightness and backlight are similar, you need to turn both up to 100% to get the max brightness....which is very bright 😉
I just read on amazon than even 3000k nits was useless under direct sunlight exposition, and a lower nits value + protective hood would be more useful. So yes, a, outdoor test would have been great :/
@@JonathanJScottFilms fellworld have any monitor where I can control camera settings? I’m trying to get the right monitor but I can't find it😭😭 Thanks if you can help me 🙏
Hey quick question. Just bought mine and it mirrors my display for 1080p showing all of my setting and so on. On 4k though it works like it should. Is there a setting you have toggled for this?
Hi Jonathan. Have you tried loading your own Luts yet using the sd slot? Does not work for me and Feelworlds support is terrible to be honest. I bought the Lut7 for the size and brightness. It is excellent. Shame about their support.
This monitor is not recording. The spec says that this monitor support 4K30 input and output. If I record to the internal memory card of the camera and set 4K60 then what will be the result? Will the monitor work at all, will it decrease to 4K30, will it not affect the result?
Check out the LUT5 on amazon: amzn.to/34nOIjV
No it doesn't
the dummy battery feature is genuis
Yep, it does come in handy
same question here
Шикарный обзор, без лишних слов! Большое спасибо!
Does it come with a battery?
상세한 설명 매우 유용했습니다.
thank you verymuch😊
You're welcome
Do you have a link for the video light?
❤❤ thanks
Nice review and I got one same monitor. Like it, did't use a lot but checking. In movie mode it works in full 5,5 inch screen,
but in Photo mode it displaying in mid center screen, showing all functions from camera screen (camera screen is OFF and in black when in photo mode). What do I need to do to see in full screen when makes photos? My camera is Sony ZV-E10 with 15mm F1,4 lens) . Thank you.
Great video...Does the fan stay on at all times? If you have the brightness turned down, does the fan turn off? or get lower?
I talk about this at 4:40
@@JonathanJScottFilms nice video :)
I would also liked if you elaborate and test a little more about the fan noise.
How little noise can you have if you reduce fan speed, and what nits does it need to be ? :)
Do you have speakers built into your lut5? Does the volume function control the audio volume coming out of the monitor or the headphone jack only? Does yours show monitor battery life left?
And it definitely has fan noise even at setting 1. No noise at 0 but your brightness can't go high else fan kicks in.
does the monitor show that the camera is recording on the screen when the camera record button is pressed and if so how is it displayed thanks
No, not unless you have your camera overlay on over hdmi and you have all of the camera info on screen, f stop, shutter speed, iso etc.
Is it normal tl have a bit of stuttering in the image displayed on the monitor?
Not really, no more than what would be displayed on the camera screen.
Does this have an auto rotate feature?? I tried mine the other day for a vertical set up, but the image went upside down 😂 not quite sure how to sort this...
@@Matt_warren_photography you can flip the image 180 but NOT 90 I think
@@JonathanJScottFilms ok cool thank you I'll take a look into that!
Is the top button programmable like the LUT7 Pro (ie button select pixel to pixel 1:1 view mode)? Or anyway you found to quickly switch between Zoomed in view (ie to focus at 400%) and 1:1: view. I normally use this as a quick button press to switch on/off Zoomed In modes. Thx J
No I don't think it is I'm afraid.
What is the difference between the % backlight and % brightness? Also is the brightness adjusted automatically via a light sensor or manually?
You can adjust it manually. The brightness and backlight are similar, you need to turn both up to 100% to get the max brightness....which is very bright 😉
test it in the sun. wouldn't that actually help?
I did, but just didn't get a chance to film it. It's very bright and works great outdoors in bright light
I just read on amazon than even 3000k nits was useless under direct sunlight exposition, and a lower nits value + protective hood would be more useful.
So yes, a, outdoor test would have been great :/
Can we control camera settings in the monitor?
No I'm afraid you cant
@@JonathanJScottFilms fellworld have any monitor where I can control camera settings? I’m trying to get the right monitor but I can't find it😭😭
Thanks if you can help me 🙏
@@afonsocovas9996 not sure, it depends on which camera you have. I'd Google it if I were you.
Hey quick question. Just bought mine and it mirrors my display for 1080p showing all of my setting and so on. On 4k though it works like it should. Is there a setting you have toggled for this?
Sorry I don't understand what you're asking.
How do you turn on false colour? Thanks.
I think it's down the bottom of the first menu.
@@JonathanJScottFilms thanks. will give it a try
How does this compare to the 2600nit LUT6 in terms of features and specs aside from that 400 nit difference?
Hi Jonathan. Have you tried loading your own Luts yet using the sd slot? Does not work for me and Feelworlds support is terrible to be honest. I bought the Lut7 for the size and brightness. It is excellent. Shame about their support.
Yeah, make sure the luts are in .cube format and in the root directory of the SD card.
This monitor is not recording. The spec says that this monitor support 4K30 input and output. If I record to the internal memory card of the camera and set 4K60 then what will be the result? Will the monitor work at all, will it decrease to 4K30, will it not affect the result?
It shouldn't affect the recording but it may not display on the monitor it depends on the model of camera
@@JonathanJScottFilms I have Sony A7S III. Will it display or not on any monitor with limited FPS, like 4K30? Thank you.
@@vladimirchapranov I'm afraid I do not know for sure.
@@JonathanJScottFilms Anyway thanks a lot
@@vladimirchapranov have you got an answer somewhere? I have the same question :)