The electrolysis method of removing rust is just so very satisfying to watch. Despite all of the corrosion, the pieces were in remarkably good condition -- there were no holes rusted through, etc. The brief segment on the history of the company was a nice bonus, thank-you.
That long spring, inside the tube, pushes the candell up into a Nozzle at the top of that tube , so that as the candle burns away, it is replenished from below . Presumably the Nozzle has been lost , and not yet renewed . . Ok.
You did a fantastic job on the restoration of this antique carriage lamp, beautiful period correct colours too. 👌I do early lighting restoration as well, the only thing that bothered me was that you used modern nuts and bolts to reassemble the piece. It would've been much for authentic to the period if you had riveted the sections back together. Great video mon ami! - Dave
Pourquoi as tu peind le réflecteur ? Et tu aurais mettre des rivets à frapper au lieu des vis et boulons car je trouve que ca enlève de son charme de l'époque. Sinon, bonne restauration.
With all due respect to you for doing a nice job... I think you only repaired this light, since when watching the video it is very noticeable that there were parts left unstraightened and unpolished and as someone mentioned in another comment the plate that reflects the light should be polished and shiny to reflect the light and not painted, mine is constructive criticism since you are on the right track and it is noticeable that you like this activity, good luck friend in future jobs, persist...!!
You should really flip your vice jaws over to the smooth side, or get a set of soft jaws. I can't see that the bondo will last long with the heat if you use it for long enough. And I hope you used high temperature paint!!
Мой вам добрый совет: когда паяете такие железки, используйте паяльную кислоту или ортофосфорную в качестве флюса. И паять гораздо удобнее электрическим паяльником, такие вещи паяются паяльником не менее 100 ватт мощности и ОБЯЗАТЕЛЬНО с толстым массивным жалом из меди. Хотя, можно паять и горелкой, но лучше все-таки горелку иметь с узким, направленным пламенем. Греть надо аккуратно, потому что у оловянно-свинцовых припоев ограниченный диапазон рабочих температур, для качества пайки вреден и перегрев, и, естественно, недогрев. Главная проблема пайки в этом видео - отсутствие кислотного флюса. Вот попробуйте, и увидите, как по металлу под флюсом побежит припой, сам, под влиянием капиллярного эффекта!
Good job. You do need to get a set of plastic applicators for the body filler. The cardboard you are using is not rigid enough for proper application on flat surfaces and doesn't bend uniformly on curved surfaces.
Мне не понятно разница в годах, в 1860 некий Чавагнат поселился в Париже. А в 1972 он набрал 150 людей специализирующихся на фонарях и маяках. Это получается сколько ему было лет в 1972 году. И в каком году он родился.
The electrolysis method of removing rust is just so very satisfying to watch. Despite all of the corrosion, the pieces were in remarkably good condition -- there were no holes rusted through, etc.
The brief segment on the history of the company was a nice bonus, thank-you.
Thank you so mush 😬
Always be proud of the work that you do, restoring items from the past for the future to enjoy.
Thanks !!🙏🏻
It's an old carriage lantern. You've done a remarkable job on it.
Thank you!! :)
That long spring, inside the tube, pushes the candell up into a Nozzle at the top of that tube , so that as the candle burns away, it is replenished from below . Presumably the Nozzle has been lost , and not yet renewed . . Ok.
Great restoration of a beautiful carriage lamp. Merci pour votre bon travail.
Merci beaucoup mon ami!
What an impressive, wonderful, fantastic restoration of such a beloved, beautiful lantern from an expert restoration artist
Waouh!! Thank you so much😁
Amazing how shiny and new that brass threading looks on the lower pipe since the other pieces look so dirty
Fantastic job restoring that old lantern. It looks much better and it works like a charm too. Excellent work.
Thanks !🙂
Now that is a time capsule restoration.
A singularly lovely restoration - thankyou - 🙂
Thank you to! :)
A splendid restoration.
A delight to watch.
Thanks bro!😁
Absolutely AWESOME!!!
Thank you!!!!
The reflector should have been polished, not painted.
Yep. The color absorbs to much of the light.
Абсолютно верно рестоврация мне не понравилась
Tirou muito das características originais da peça; principalmente a logomarca. No fim, parece que ficou uma peça criada e não restaurada.
But he only painted one side? He may not have polished the interior side of the reflector but it still looked good to me
You did a fantastic job on the restoration of this antique carriage lamp, beautiful period correct colours too. 👌I do early lighting restoration as well, the only thing that bothered me was that you used modern nuts and bolts to reassemble the piece. It would've been much for authentic to the period if you had riveted the sections back together. Great video mon ami! - Dave
I agree my friend, it's easier to edit.. Thank you very much anyway!🙂🙂
В фонарях карет ,насколько знаю, была автоматическая подача свечи на пружине
Beautiful piece of history ✌️🌹
Thanks :)
industrial archaeologists, in a distant future , may find Modified relics ! !
World absolutely love to hear you talk this out
Thanks :))
Обалдеть, классная реставрация на все 💯. Лайк мастеру. Спасибо за видео.
Thanks !!!
You create magic. What a piece of beauty!
Thanks 😍
Nice job on the carriage lantern.
Thank you bro!
Que espetáculo! Parabéns pelo capricho e criatividade como sempre! Fiquem com Deus se cuidem aí.
🙏😍👏👏👏🇧🇷
Thanks !! :)
I really enjoy your Showmanship !
Thanks :)
Very well done sir,all you need now is the horse and carriage.😮😊.
Yes😂 Thanks bro 😁
Love It I really liked that you used screws and nuts to put it back together
Thank you!!🤪
Looks great 🕯
Thank you!!
Old Lanterns 🙂 Inner peace 🙏
Jolie passion et... Jolie restauration ! Bravo
Merci beaucoup :)
Ya solo falta el carruaje! Muy bonito mita quedó
Bravo jolie restauration de cette ancienne lanterne
Merci beaucoup Patricia!
Exelente trabajo....muy bien video !!!
THANKS !!😁
Beautiful! Well done
Amazing stuff and wonderful work
Thanks 🤩
БРАВО МАСТЕРУ! МОЛОДЕЦ!!!
Aha, Thanks !!😂
A great piece of history saved. I do sense the level of special effects and drama to be increasing. Well done
Waouh thank you !🤩
That’s funny my Easter is next Sunday so I can use one of those 😂
Félicitation pour votre travail de restauration sa fait plaisir de voir le travail finit ❤
Merci beaucoup, ça me fais plaisir!😁
Bravo 👏 👏 👏 👏 superbe travail 🎉🎉
Merci beaucoup !! :)
Magnifique restauration ❤
Merci beaucoup!!❤️
Que hermosa restauración!!!🇦🇷
OBRIGADO!!!
Alors là super et incroyable et félicitations
Merci beaucoup GRANNY!!❤️
Сто сорок років пройшло, а лампочка світить як новенька! Оце якість!
PARABÉNS meu amigo, truxe-a vida novamente ❤️
Abraço aqui do Brasil 🇧🇷
OBRIGADO🇧🇷
Wonderful video 👍👍
Thanks!! 😁
Well done!!🎉🎉
Thanks!😁
0:16 The guy opened a tinsmith factory to make gas and candle lanterns in 1972, eh? Do you even proofread your own stuff?
Теперь если дома выключат свет, то можно ходить по дому с этим фонарём. 😄 Он может пригодиться даже в дождь👍
Breath taking restoration and qwite the history lesson as well I have a question though do these pieces go into museums once their restored
Pourquoi as tu peind le réflecteur ?
Et tu aurais mettre des rivets à frapper au lieu des vis et boulons car je trouve que ca enlève de son charme de l'époque.
Sinon, bonne restauration.
Très belle restauration. Un plaisir de voir vos vidéos.
Tout le plaisir est pour moi!🙂
Очень плохая рестоврация
A nice video. Thank you.
Thanks :)
Excellent work..
Thanks :))
With all due respect to you for doing a nice job... I think you only repaired this light, since when watching the video it is very noticeable that there were parts left unstraightened and unpolished and as someone mentioned in another comment the plate that reflects the light should be polished and shiny to reflect the light and not painted, mine is constructive criticism since you are on the right track and it is noticeable that you like this activity, good luck friend in future jobs, persist...!!
@@Oymir4511 Thanks for the TIPS :)
... Uauuuuuu ... Ameiiiiii ... Belíssimo ... e os Momentos de Descontração ... Magnífico ...
It was a most impressive and excellent job you've done on that lamp😊
Thanks !!!
beautiful 👍
Thanks bro
hardworking bro👍
Thanks :)
Nice result! 2 questions: did you use heat-resistant lacquer, and did you treat the inner surface with something?
TÔ ENCANTADA COM SEU TRABALHO
Wow, that is so cool, great job! New sub!
Thanks :))
So cool! ❤
Thanks !!😁
very nice 👍🏼
Thanks 😁
Voce tem uma luz vermelha aí na sua oficina? Está dando reflexo nas peças que vc pinta.
I wonder if he just cleaned the glass or replaced it
You should really flip your vice jaws over to the smooth side, or get a set of soft jaws. I can't see that the bondo will last long with the heat if you use it for long enough. And I hope you used high temperature paint!!
Good job
Thanks :)
Amazing boss👍👍👍😁🇲🇨
Waouh thank you!!!
Просто красота! 👍👍👍❤️❤️❤️
😁😁
Trabalho maravilhoso.Linda lanterna vintage do sec 19.From Brazil
Lindo assassinato de uma lanterna do séc XIX...
Te felicito, que paciencia! Abrazo desde ARG
¡¡muchas gracias!!🇦🇷⚽️
🇨🇵👏👏👏
God damn it - you are good!
Thanks :)
It's cool with the candle. I would've used a battery type candle
Lindo trabalho parabéns 🎉❤
Thanks ! :)
Belle restauration ! Je m'abonne ! 😀
Merci beaucoup🔥🔥
Buen trabajo 👌👍🇪🇸🌿
GRACIAS!!🇪🇸
Admiro seu trabalho é incrível já sou fã do seu canal.
😁😁
Bravo....magnifique
Merci beaucoup!!
МАСТЕР👍👍👍👍👍👍👍👍👍👍🌷😊
Finishing putty? Is that stored next to the starting putty?
Nice job! Why not puting back those rivets instead of screws?
Proof he was a time traveller, He opened a shop in 1972 and it burnt down in 1884.
the 9 had to be an 8
عمل جيد ولكن كان يجب ان لاتستبدل البيم بالصاموله
رائع جدا وغير متكلف ..
Thanks :))
what happened to the spring? did I miss a part
The spring was in good condition, I didn't stop on it :)
What is that spring’s job or purpose?
Какой сказочный фонарик.Я бы назвала его «Сверчок»😊
:)
Beautiful. Do u find these pieces? or do clients send them to u for restoration? Do u sale them? Just wondering..
Gente quanta beleza
Cassica
Eu amei
Nota 1000❤❤❤❤
Waouh! Thanks!!!😁
A coach lantern. Equivalent to headlights on a modern car.
🤩🤩
Мой вам добрый совет: когда паяете такие железки, используйте паяльную кислоту или ортофосфорную в качестве флюса. И паять гораздо удобнее электрическим паяльником, такие вещи паяются паяльником не менее 100 ватт мощности и ОБЯЗАТЕЛЬНО с толстым массивным жалом из меди.
Хотя, можно паять и горелкой, но лучше все-таки горелку иметь с узким, направленным пламенем. Греть надо аккуратно, потому что у оловянно-свинцовых припоев ограниченный диапазон рабочих температур, для качества пайки вреден и перегрев, и, естественно, недогрев.
Главная проблема пайки в этом видео - отсутствие кислотного флюса. Вот попробуйте, и увидите, как по металлу под флюсом побежит припой, сам, под влиянием капиллярного эффекта!
Ничего в этом деле не соображаю,но почему то прочла Ваш комментарий до конца.😊
I love old stuff but did you mean 1872 instead of 1972??
Good job. You do need to get a set of plastic applicators for the body filler. The cardboard you are using is not rigid enough for proper application on flat surfaces and doesn't bend uniformly on curved surfaces.
Thanks for the advice😁
Não sei se gosto mais das transformações ou daa inúmeras técnicas que ele usa.
Why not Rivots?
Мне не понятно разница в годах, в 1860 некий Чавагнат поселился в Париже. А в 1972 он набрал 150 людей специализирующихся на фонарях и маяках. Это получается сколько ему было лет в 1972 году. И в каком году он родился.
tienes una nueva suscriptora
Gracias🎉
Rather than pour the paraffin into the holder, I’d make several candles to fit.
It’s a brilliant restoration- obviously many day’s work.
Thanks :))
The modern screws are the absolut NO GO...!!
Where are the old fashioned BRASS screws..?????????
one advantage of the nuts & bolts is that future repairs & improvements can be accessed by screwdriver !
This Lamp needs “A Sympathetic Restoration” Not a new bought lamp!
Sympa comme retour à la vie. Tu es sur que le réflecteur était doré ?
Merci! Je trouve que le dorée rajoute plus de charme.
Soulever les pièces rivetées avec un couteau à enduire plutôt qu'un tournevis permettrait de limiter la déformation des pièces.