Great Video!!! @TommyCBricks - However, I need to share: Proud Papa here! My 8-year-old son built this ALL BY HIMSELF on-and-off over the course of 4 days!
I have five cars afterlife clean, afterlife rusty. Original 84 car ladder on correct side and repositioned door handle, Ecto-1 84 with black exterior And Ecto-1 A with all the extras
Woah in glad you can make it almost identical to the original look and without getting extra bits at least not too many but I just built most of it the opposite way almost like a mirrored version so Tue gunner seat comes out the other side and the ladder is on the correct side and obviously I didn't build the roof equipment mirrored neither the engine or steering but also nice job on the 2021 look it has certainly had much effort put into it and it looks good
I personally hate the cheap looking rim covers, so I put the nice dish rim covers from the VW Camper Van onto the Ecto. To keep them fixed on the rim I use some sticky gum to "glue" the dish onto the outside bit of the axle, that stands out off the rim.
I loved Ghostbusters Afterlife so I went for the original afterlife build but didn’t apply the rust stickers. I’m now waiting for the light kit from Game and Bricks.
Are these mods now available on your website? These looks great and I would really like to do your version of the Afterlife ECTO-1 with the different colour brick pieces.
If afterlife has Ecto-1 and the ghostbusters ended with GB two and Ecto-1A, did they buy another car in GB two and made the Ecto-1A? then they did save the Ecto-1 in a garage?
Nice mods. One mod everyone can do and I suggest everyone do is, is to lift the car off the ground. Put a 2x8 or 2x10 brick and match plate under between the front and back wheels. This will lift the car off the ground just enough to keep the wheels from getting flat spots.
Cool mods, really like the brickbuild afterlife Version. Have you seen my Ecto-1 MOCs on Rebrickable, MOC-68873 a GB1 version and MOC-77303 a 2016 reboot version?
Hopefully you'll see this comment as its an old topic, but could you make GB figures for this Ecto 1 like you just did for the Delorean 10300 set? That would be epic!!!!
What about a ecto-1a from ghostbusters two or a frozen empire one with the trap drone and frozen detail plus the red line going all the way down the car?
What happened to the gurney instructions? I just built my Ecto-1 last night and was looking around for what mods are available and came across your video. I downloaded the proton pack instructions, but there is nothing about the gurney.
Good morning Do you still have all the instructions available for the Proton Packs and how you made it more Afterlife ECTO? Went to the website and the only thing under instructions is an astro droid
I am still a little confused. I got this set but want to make the original and not the afterlife version so I was just curious on how to get instructions for that. Is the only way to go through that rebrickable guy and is there any extra parts I need or is everything I need in the set?
Um, technically *adjusts nerd glasses pretentiously* the Ghostbusters game on the XBox360/PS3 is "Ghostbusters 3", The storyline takes place 2 years after GB2, features the voices of all 4 original Ghostbusters (Harold Ramus' final portrayal of Egon), and was partially written by Akroyd and Ramus. That makes "Afterlife" the 4th movie, not the 3rd as advertised. This infringement is being flagged for false information. XP (Don't worry... I'm not actually that big of a twat. XD) Those are all pretty great mods, honestly.
Can you send me a link for your plans to MOD the afterlife ecto 1 with parts as I really want to do this. Your passion for this matches my own but I don't have the creativity that you have. Really enjoy watching your channel.
if you want frozen empire ecto 1 change some parts on the roof replace the bloe tubes with grey ones change the red stripe reaching the front of the car ask me if i missed some stuff
For the original Ghostbusters ecto-1 does that model use all the pieces from the set or are they additional pieces you have to use from your own collection?
So hyped for this video man! Unreal MOC skills! 🤯
Hi minisuperheros today
I couldn’t agree more. I love how the rusted parts looks a lot more realistic than the sticker sheet. This MOC really is an amazing build.
Hey can you make a vid of how to make Ghostbusters fugures with out the actual set
I love your videos!
Wassaa
Very unique seeing a upgraded afterlife version instead of just converting it to the original, not to mention both!
New Ghostbusters was such a good sequel, and creator Ecto 1 is an amazing build. Can't wait to see what will u add
Great Video!!! @TommyCBricks - However, I need to share:
Proud Papa here! My 8-year-old son built this ALL BY HIMSELF on-and-off over the course of 4 days!
0:29 "more like the Ghostbusters 1 version" *shows GB2*
Looks great! I would use some of theses, if I had the set...
1:01 reminds me of that time just2good revealed his face by the silver piece on kylo rens ship review lol
I have five cars afterlife clean, afterlife rusty. Original 84 car ladder on correct side and repositioned door handle, Ecto-1 84 with black exterior
And Ecto-1 A with all the extras
I really want to have the Original Ecto 1 and the 1A
If you need to mod your lego car
Who you gonna call
TommyC
The tilted license plate is genius and is a great little addition!
Nice vid see your bricklink package 📦 finally turned up
He’s said the K.P.E. Meter It’s called P.K.E
Thank you! This bothers me.
@@patrickassmus3132same lol
He said „he‘s“ it‘s spelled „he“
It’s an easy mistake for someone who isn’t a huge ghostbusters fan, don’t get so angry at him
Holy smoke this is awsome!! That's just so damn cool
Love the weathering you done on the Afterlife version...awesome
I just wish he had the plans for it available
Great video! Love the ghostbusters.
I made mine the 1980s version on my own and also gave it lights and a speaker
Buying the ecto-1 soon when comes back in stock
you're so talented at this
great building skills :)
I used black electrical tape to do the double black out lines on the rear windows. Looks awesome
Brilliant MOC about to buy this set myself and you have inspired me to do something similar thank you
Dammit, now I want both Old Ecto and New Ecto in a display!
The suicide door that the "gunner seat" came out of was actually accurate to the vehicle.
Would love to see an Ecto-1a mod of this kit!
Pretty awesome all the different mods you do
Woah in glad you can make it almost identical to the original look and without getting extra bits at least not too many but I just built most of it the opposite way almost like a mirrored version so Tue gunner seat comes out the other side and the ladder is on the correct side and obviously I didn't build the roof equipment mirrored neither the engine or steering but also nice job on the 2021 look it has certainly had much effort put into it and it looks good
Amazing!!!!!!!! I have just bought this set building it now and I am not putting the stickers on thanks for the vid
I personally hate the cheap looking rim covers, so I put the nice dish rim covers from the VW Camper Van onto the Ecto. To keep them fixed on the rim I use some sticky gum to "glue" the dish onto the outside bit of the axle, that stands out off the rim.
Awesome job! Thank you for sharing!
I agree, it looks to new. It needs to Get more destroyd
I loved Ghostbusters Afterlife so I went for the original afterlife build but didn’t apply the rust stickers. I’m now waiting for the light kit from Game and Bricks.
Are these mods now available on your website? These looks great and I would really like to do your version of the Afterlife ECTO-1 with the different colour brick pieces.
Did you ever get instructions made for the proton packs? If yes where might I go to find them? Thank you very much and have a great day. 🙂👍✌
On his website for FREE!!
@@Lingham no gerni tho atleast as far as i can find
Love the mods and definitely can’t wait to get this set.
That proton pack is too clean
Totally need the plans for the swapped color bricks!
Why are the instructions for the extra's gone on your website?
This is tight!
Did you ever get a Proton Pack Gurney made? the cord from the trap to the pedal isnt there nor the gurney in the instructions
The ecto 1 is such a good car
If afterlife has Ecto-1 and the ghostbusters ended with GB two and Ecto-1A, did they buy another car in GB two and made the Ecto-1A? then they did save the Ecto-1 in a garage?
Imagine if you were Abel to put the mechanics from the remote control bat mobile into the ecto 1
Does the Rebrickable mod use all the pieces from the original Ecto-1 set?
awesome mate
Very nice
Nice mods. One mod everyone can do and I suggest everyone do is, is to lift the car off the ground. Put a 2x8 or 2x10 brick and match plate under between the front and back wheels. This will lift the car off the ground just enough to keep the wheels from getting flat spots.
2:04 OMG!.. What is that curly thing?!?!
Hi Tommy
Do you think you could build the Ecto 1A from ghostbusters 2?
Cool mods, really like the brickbuild afterlife Version. Have you seen my Ecto-1 MOCs on Rebrickable, MOC-68873 a GB1 version and MOC-77303 a 2016 reboot version?
?
The 2016 reboot is a hearse you would need more parts probably
Oh wow o.O
Is that an instrumental of I Wanna Be You Lover by Prince, how have I not noticedh that
Awesome 🤩
We need a video for those making Ghostbusters II ecto 1
Almost had a stroke reading that thumbnail lol.
Hopefully you'll see this comment as its an old topic, but could you make GB figures for this Ecto 1 like you just did for the Delorean 10300 set? That would be epic!!!!
What about a ecto-1a from ghostbusters two or a frozen empire one with the trap drone and frozen detail plus the red line going all the way down the car?
What happened to the gurney instructions? I just built my Ecto-1 last night and was looking around for what mods are available and came across your video. I downloaded the proton pack instructions, but there is nothing about the gurney.
So much smoke in all these shots
Good morning
Do you still have all the instructions available for the Proton Packs and how you made it more Afterlife ECTO?
Went to the website and the only thing under instructions is an astro droid
What about the ecto-1A
Given that we already have the ecto 1 body, somebody needs to make the ecto 1a
adding a link to re-brick-able page for the original Ecto1 mods would have been nice
Please tell me, how did you make the fixed rear left door
in the car movable?
love it!
cool video man I made a time lapse of mine and a small video at the end of the lights
Did you remove the instructions from your website? I couldn't find the BTTF ones either
Is it possible to turn this car into the Ecto 1A from Ghostbusters 2?
Bro you should make buildable figures for it
I left of the cookie cutter rust stickers so it looked good
Definitely left my sticker off.
love ur vid thi
When u already have the lego Afterlife car right now in ur room be like:
y e s.
I am still a little confused. I got this set but want to make the original and not the afterlife version so I was just curious on how to get instructions for that. Is the only way to go through that rebrickable guy and is there any extra parts I need or is everything I need in the set?
SCHWACHSINN!
Um, technically *adjusts nerd glasses pretentiously* the Ghostbusters game on the XBox360/PS3 is "Ghostbusters 3", The storyline takes place 2 years after GB2, features the voices of all 4 original Ghostbusters (Harold Ramus' final portrayal of Egon), and was partially written by Akroyd and Ramus. That makes "Afterlife" the 4th movie, not the 3rd as advertised. This infringement is being flagged for false information. XP (Don't worry... I'm not actually that big of a twat. XD)
Those are all pretty great mods, honestly.
Cool!
like this set but hate the roof rack lights and spot lights. they're too close together.
Where can you find the ghostbusters app you made
Cool
does the light kit still work with the moc version?
Can you send me a link for your plans to MOD the afterlife ecto 1 with parts as I really want to do this. Your passion for this matches my own but I don't have the creativity that you have. Really enjoy watching your channel.
Dude the gunner seat would have been installed in ghostbusters 2 to deal with all the ghosts
Dangit I thought this vid was about the lego ideas one
if you want frozen empire ecto 1 change some parts on the roof replace the bloe tubes with grey ones change the red stripe reaching the front of the car ask me if i missed some stuff
the thing on the roof is the dome for the drone👍
Ironic that i got a ghostbusters ad while watching the video
You should make a lego ecto 1-a mod
A true mod would be turning it into the Ecto-1B
Easy vid idea how you show your models with smoke
Please do a mod for Ecto 1-A from ghostbusters II
Where to get the afterlife version
I have a question do I have to buy the parts in order to modify the ecto 1 to the classic first film?
For the original Ghostbusters ecto-1 does that model use all the pieces from the set or are they additional pieces you have to use from your own collection?
PKE meter. Not KPE meter. Just wanted to let you know.
But nice job on the mods! i shall now subscribe.
Someone please make a 1A out of the new set
Can we get an ECTO-1A mod?
MOC-95200 could be what you are requesting
question here, planning to purchase the model, does it have suspnesion or fixed wheels?
Fixed
Just watched the film and uh. What happened to Ecto-1A
Are you gonna upload the instruction for the proton pack been months
I purchased them this weekend
Now if only we could get a general lee from dukes of Hazzard
Ghost busters should get some more sets