Bonjour. Je ne sais pas si vous parlez le français! Ce petit mot pour vous dire que je suis très admiratif de votre travail. C’est un réel plaisir de regarder vos vidéos. Merci à vous.
great project! suggestion: use the drill stand for starting the tap. Chuck the tap in the drill. no power, just the weight of the drill, twist with your fingers. Keeps the threads "square" to the work
Good idea! I like it ) - - Aliexpress sells rear bicycle lights with laser gauge indicators. In the middle there are 2 lasers with linear beams. And it's cheap))
This has been amazingly useful My only question is where should I set the focus? At the place I want the line to be or at the place the acrylic rod will be?
Why not tap with your drill jig? It should be more perpendicular than doing it by hand. Maybe build a speed controller for the drill if you want to slow it down for tapping. Nice build!
The Bosch drill you use to make the holes in the Aluminium tube appears to have speed control. Can you tell us the model? Can you also show us how to make the drill stand (press) you use in the video? Thank you for your very interesting channel!
Profesor drago, gracias por responder, mire ya lo intente, pero el tamaño es muy grande para mi herramienta, probé con uno pequeño pero es de batería de reloj, usa 3, no hencuentro como sustituirlas por un alimentador ya sea de batería AA o eliminador de corriente, he probado y se vuela el láser, se quema, a que amperaje alimenta cada pila? usted sabrá? Cuanto amperaje nesecito si son 3 pilas? gracias profe
Cordial saludo desde Colombia, puedes comprarte un apuntador laser, de esos que se utilizan para indicar sobre un tablero, lo desarmas y ya tienes tu unidad laser.
@@jisakukobo Brilliant design,maybe can be also built on a vacuum plate, then You can use it on a non magnetic surfaces, such as aluminum,plexiglass, etc
If you find any unauthorized reproduction of the JSK-koubou video, please report it to me.
Thank you.
JSK-koubouビデオの無断複製を見つけた場合は、報告していただけると助かります。
はじめまして、こちらに 登場しています 磁気ベースのドリルスタンド(ガイド?)の製作動画はないのでしょうか?
レーザーのライン化原理・色々な加工法・様々な工具類・取り扱い方など
とても勉強になります‼️😊
ここで作った物は、自分で何か作る時に役立つ実用的なものなのでツボに
ハマります❤
工作の参考になれば幸いです
I was looking to buy a line laser, then stumbled into a rabbit hole of DIY with spinning motors and this 😂 英語訳ありがとう! たくさん学びました
すげーアイデアマン!
作業も動画編集もシンプルで無駄がない分かりやすい動画。
2か国語で文字数の制約もあり、字幕をまとめるのが難しいです。
分かりやすいと言って頂けると嬉しいです。
Bonjour. Je ne sais pas si vous parlez le français! Ce petit mot pour vous dire que je suis très admiratif de votre travail. C’est un réel plaisir de regarder vos vidéos. Merci à vous.
great project!
suggestion: use the drill stand for starting the tap. Chuck the tap in the drill. no power, just the weight of the drill, twist with your fingers. Keeps the threads "square" to the work
Fantastic suggestion, thank you!
ビデオはよく提示されており、非常に便利です。ありがとうございました!
道具や材料を大切に扱ってるのがすばらしい
Genius! この調整ユニットは素晴らしいアイデアでした
ものすごく為になる動画でした。素晴らしいです。
普通のレーザーポインターの先端に、テープで幅1ミリのスリット(細窓)を作り
ビームの断面を丸から線状に変換して、直径6ミリ位のマドラーで試したところ、
意外にシャープなラインレーザーになりました。少し明るさが落ちますが使えそうです。
大変参考になりました。ありがとうございました!
はじめて‼️発想が凄い👍
はじめまして‼️発想が凄い🧐
同じレーザーユニットでドットレーザのユニットまで作りましたが、用途が見つからず放置しておりました。ラインレーザの仕組みが分かりましたので、ぜひ作ってみたいと思います。貴重な動画ありがとうございます。
いえいえ
Good idea! I like it )
- -
Aliexpress sells rear bicycle lights with laser gauge indicators. In the middle there are 2 lasers with linear beams. And it's cheap))
Congratulations. This is a very clever idea.
コレ凄過ぎです。ロボットのティーチングに今までは投影型のマーカー使っておりましたが中々中心を出しづらく、結構時間掛かってました。買うと高いので渋々使ってましたが…。このラインレーザーは小型な上角度まで調整出来るなんて!!安価な上に汎用性抜群じゃないですか!
ありがとうございました。
ありがとうございます。
一点だけ、レンズとレーザーの軸がズレるとラインが直線じゃなくて円弧状に曲がってしまうので注意してラインを見てください。
次の動画で補正方法を紹介するつもりですが・・・ロボットを作るくらいなら多分自己流で解決できると思います。。。
Congratulations, this is one of the coolest ideas I have ever seen
はじめまして.580円でレーザー発振子が販売されているのですね.安いですね.しかも焦点距離の調整機構まであるとは驚きです.ラインレーザーに変換する方法が詳細に紹介されていて,大変勉強になりました.
Another superb video. Thank you so much for sharing. I really like your drill stand. Did you make it? If so, I would really like seeing the video.
did you find the video? I saw this video thinking that it was where it shows how the drill guide does
Amazing ideia, and the solution to the angle problem, was a genius trick.
電ドルで穴開けるときのジグっぽいの便利ですね
I just want to say that the whole idea is brilliant!
Brilliantly simple! Thanks for sharing!
これぞDiyって感じがいい!!
This has been amazingly useful
My only question is where should I set the focus? At the place I want the line to be or at the place the acrylic rod will be?
perfects skills did you made your drill press by yourself
すごくためになりました。
特にラインレーザーの作る方が勉強になりました。
Thanks I learned a lot of new things now
Thanks a lot for this video , and thanks alredy for subtitles .
I didn't know much about laser pointer but I understand now
so simple and thank you for English sub =)
awesome work!!
Thank you very much for the tutorial. Concise and precise video
アイデアと技術に感嘆する動画。
Millions of thanks for an awesome topic! Great elaborations! Thanks.
Thanks for sharing this amazing idea , good work man
Nice & hard work sir, Congratulations, Thanks for sharing information
It's amazing!
Why not tap with your drill jig? It should be more perpendicular than doing it by hand. Maybe build a speed controller for the drill if you want to slow it down for tapping. Nice build!
オモテナシ文化ですねー☺️素晴らしい!自分も作ってみます!
This made my day! Thank you!!!
Hi, very nice job! How did you build this vertical drill support? I couldn’t find a video about it.
Thank you for sharing.
Paolo
Yes, we need a plan and instructions on how to build one or where to buy it. Thanks
👍 Good idea and nice work ! 👍
Sir, you are a genius. Thank you for sharing
Great idea!
I really love the drill stand . where can i buy this or it's homemade .
you found it? I saw this video thinking that he would say how he did it
Very nicely done. Thank you.
Tanks for sharing.. amazing to know princple module line laser
Very nicely done!. Thank you.
The Bosch drill you use to make the holes in the Aluminium tube appears to have speed control. Can you tell us the model? Can you also show us how to make the drill stand (press) you use in the video? Thank you for your very interesting channel!
And how to make the cyrcular saw also ;-)
Yes. Please tell us how you made the drill stand. Or where we get information about it?!
Damn! This is so a cool and clever invention... THUMBS UP!!!
Thank you for sharing! It's so useful.
I see the silent and i love it
Толщина заготовок всегда будет смещать ориентировочный центр.
ありがとうございます勉強になりました❗😅💓
Super handy! :D Thank you!
いいな 何回も見直してる。
Прикольно. Не думал что всё так просто
Amazing... Perfect idea... Thanks for share...
Superb video, can you share the drill press design which ur using in the video, thanks once again..
Genius! Thanks for sharing 🙂
Muy buena idea, Gracias por el video y aporte.....
ほんと綺麗な手…!
(そこ)
Tec hnology with LASER, well we have a trip in an other time dimension now!
いやあー。
うまいもんですなあ!
Appreciated. Thanks
un geniooooooooo!!!!!!
Fu**ing brilliant! Cheers!
ラインの太さを太くするのは可能でしょうか?職場の置場ラインをレーザーでマーカーしたいのですが一般の用途と違うため100ミリくらい太いラインが出せるレーザーを探してましたらこちらがヒットして拝見させていただきました。
Profesor drago, gracias por responder, mire ya lo intente, pero el tamaño es muy grande para mi herramienta, probé con uno pequeño pero es de batería de reloj, usa 3, no hencuentro como sustituirlas por un alimentador ya sea de batería AA o eliminador de corriente, he probado y se vuela el láser, se quema, a que amperaje alimenta cada pila? usted sabrá? Cuanto amperaje nesecito si son 3 pilas? gracias profe
真的太受用了~謝謝你!
That Drill Press/Guide, howto make?
Second laser to 90°
ボール盤のジグ便利そうですね。 作り方・部品一覧などあれば知りたいです。
jisaku-koubou.com/archives/3582
ここで、一応紹介していますが、部品は工業用のものを工具商から取り寄せているので一般的に手に入らないものを使っています。
作る際も、フライスで精密加工が必要なので一般向けではありません。
今、簡単で精度の高いボール盤風の冶具を設計中なので、そのうちyoutubeで公開します。
それまでお待ちください・・・
返信ありがとうございます
そうなんですね、期待しています!
Sir, is that drill stand made of precision drill guide and modified with self centering doweling jig kit?
Thanks for adding English subtitles. My Chinese isn't very good ;-)
I believe JSK is Japanese.
Great!
Awesome
que tal amigo, me encanto la idea, soy de México, sabes como lo consiguió acá o como se llama? lo he buscado y no e tenido suerte
アップロードしていただいた動画を見ています。どれも治具が丁寧に作られていて制作物の品質も高いものに感じます。
この動画で仕様されている電動ドリルを垂直に降ろす機械はどのように作られましたか。
市販されているものだとあまり正確には垂直に降りないため、使い勝手が素手以下の現状があり困っています。
jisaku-koubou.com/archives/3582
Большое СПАСИБО !!!
Awesome
How did you make the drill guide?
Hello, i like your drill press stand a lot, it is exactly the tool i am looking for my workshop. Can I buy your stand? Can you delivery to tokyo ?
did you find the video? I saw this video thinking that it was where it shows how the drill guide does
Do you also have a video of your drill stand? Or did you buy it?
ドリルガイドはどこのメーカーのものですか?
凄いの 一言です ありがとうございます 。
que tal amigo, me encanto la idea, soy de México, sabes como lo consiguió acá o como se llama? lo he buscado y no e tenido suerte
Cordial saludo desde Colombia, puedes comprarte un apuntador laser, de esos que se utilizan para indicar sobre un tablero, lo desarmas y ya tienes tu unidad laser.
調整機構のところはなぜ角パイプを取り付ける必要があったのか?
それがあると使う時に不便な気が、、
見た目は良いけどね
これは加工上の都合です。
特に性能に関して理由があるわけではありません、
多少、外観も意識しましたが・・・
Always thought Japan would be way more expensive....I wouldnt be able to get any type of Laser for 580 Yen. It would be more lke 5800 Yen here
自殺工房に見えた僕は末期かもしれない…( ´•̥̥̥ω•̥̥̥`)
大丈夫、自作工房の屋号を持っている私ですら、たまーに自殺工房って見えたりします( ^ω^)・・・
あぁ、私も末期なのかな?
why so many manipulations? some lasers like this can by already has spot/line/croft and cost
Its called building it yourself, to meet your specific needs.
This channel may not be for you.
A small question: The drill stand is made by Your self, or You bought it ?
DIY
jisaku-koubou.com/archives/3582
@@jisakukobo Brilliant design,maybe can be also built on a vacuum plate, then You can use it on a non magnetic surfaces, such as aluminum,plexiglass, etc
👏👏👏👍
Thanks!
New Video↓
ua-cam.com/video/1h9v_0jwgUM/v-deo.html
3Mのビスを入れるためのみぞを掘る工具の名前は何ですか?
タップと言います
How to make a + (cross) with one laser?
2 bars?
Самый лучший
Здравствуйте. Есть ссылка комплектующих на али?
そのレーザーモジュールはどこで購入できますか? できれば通販いがいで
but there is same module with line option. :)
こちらのドリルスタンドはお造りになったんですか。
そうです。
余り使い勝手が良いものではありませんが、鉄板に吸着させて使う事を想定したドリルになります。
そのうち、改良型をyoutubeで公開します。
jisaku-kobo / 自作工房
動画楽しみにお待ちしています。
ソファの本格的DIYして欲しい
Проще купить готовый с перекрестием. Стоит копейки.