Man dude you help me out so much with this hobbies I just got a losi 8ight 4.0 with a Ryan lutz edition brand new car and motor so I watched your break in man you make some cool videos learn a lot and definitely be ordering bones brew cause that stuff looks legit in your vids thanks bro for the knowledge and merry Christmas
Dude you need a head mount for your camera systems and it would make everything so much easier haha. Thanks for the video! I just got a new black top Reds 721 like yours and will be breaking it in this Friday!
Hey Rajaa, love you video dude! I was wondering if you have a video break down on engine breaking in. I'm a newbie when it co.e to nitro. I've been running electric rc but got into the nitro and would love to properly break in my new kyosho inferno neo st 3.0 can you help me maybe explain a few thing like "rich and lean"
NICE!!!! congrats brotha, can’t wait to get you out there, you will love the truggy trust me, and if you need any help, you already know where I put at, I’m glad to help👍🏾👍🏾👍🏾👍🏾
rajaa111 I think it comes in red as well is this the same one? www.amainhobbies.com/reds-721-scuderia-gen-2-s-series-.21-offroad-competition-nitro-engine-combo-redcobu0014/p1172508
I'm watching all ur breakin videos bruh I need to know the ins & outs. Yo also show that needle work with the carb I am a brand newbie to this 3 needle nitro level.
I just put a new piston and sleeve into my cheap rtr engine. I didn’t know about breaking in. I’ve only run it a couple of times, not flat out. Is it worth doing a break in now or too late?
Hey bro I got the serpent Buggy it's off-road and I'm at the point where I'm ready to break the motor in. the motor says 25% Nitro I have that Bones Brew 20% nitro and 12% oil will that stop the car from starting or have any problems?
Hey bud stick question :I have a quart of VP nitro fuel that still has the seal under the cap but it was purchased in 2015 do you think it would be ok to still use it or toss it? It's been sitting in bottom of my closet until now.
Garrett Feury it should be ok, vp uses metal cans to keep the moisture out and the nitromethane in, as long as it wasn’t in direct sun light you should be ok
A rajaa great video but how you gonna put that dirty header on such a sweet peice of equipment next time just hit it with that scotch brite pad dammm bro i understand get all excited about the motor an break inn that dont matter but next time great information thankx
Thats whats goody bro! Good basic information! Not getting all fancy just streight cut fundamental break in nice! Job! Only thing i think is important and maybe i mised but what fuel you use for break in? Whats the mixers you perfer! And how much lubracation do you recommend on break in fuel! Is vital to your break in! Just my 2 pennies! But nice job! Peace!!
Thanks brotha, I always break in my engines on what ever fuel I’m using, the more oil percentage the better, I never break in a motor on anything less then 10% oil, truthfully I never run on and fuel less than 10# oil and alway 30% nitro. I’m going to try this worlds blend that’s 30%nitro 8% oil, a Kyosho factory team driver gave me, he swears by it so we shall see
Jason Auteri thanks Jason, i should have used me go pro headband but I was just being lazy, I’m going to look into the phone headband that sounds like a nice thing to have
@@rajaa111 the parts for them are so easy to get I've never had any problems with any of mine needing parts or replacing anything I've got too hypers a hyper 7 with a .21 and a hyper vs running a .30 Then I'm rebuilding an old kyosho
@@rajaa111 I might in the future. Unfortunately my mother has been battling cancer for the last 18 months, and my father is in a wheelchair and has only just got out of hospital from a neck operation, so my hobbies have been put on the back burner.
@@rajaa111 I just got this reds 721 gen2 engine. Can't wait to break it in once it stops raining 😀😀 been watching your videos of it and it looks like a ripper 🚀🚀🚀
YOU SIR ARE THE MAN! KEEP UP THESE VIDS YOUR AN INSPIRATION TO ALOT OF PEOPLE WANTING TO GET INTO NITRO! KEEP IT UP MUCH LOVE FOR YA BRAAPPP BROTHER!
Thanks brotha, I'm glad to help, plenty more videos to come
For sure ?
@@rajaa111 So what do you think about breaking in a engine on 30 percent?
@@keithbates8482 I always break my engine in on 30% nothing wrong with it, you can break it in on what ever your going to run
@@rajaa111 Thanks brother 👍✌💯
My boy drops consistent gems! Keep the videos coming.
James Brown my man/racing brotha JB, thanks see you at the track 👍🏾
This video is awesome!! I want to get back into nitro. And this information gives me a lot of confidence in getting back into it!!
Man dude you help me out so much with this hobbies I just got a losi 8ight 4.0 with a Ryan lutz edition brand new car and motor so I watched your break in man you make some cool videos learn a lot and definitely be ordering bones brew cause that stuff looks legit in your vids thanks bro for the knowledge and merry Christmas
Thanks brotha, I'm glad the video help, sorry I'm late been playing catch up, Happy holidays to you and your family
Wasnt sure wat Im gonna buy... nitro or electric... gettin both now.
Thx for the great videos u do.
Greetings from Germany
Thanks brotha
Dude you need a head mount for your camera systems and it would make everything so much easier haha. Thanks for the video! I just got a new black top Reds 721 like yours and will be breaking it in this Friday!
You are master with all nitro help and advice,thanks!!
Dammmmmmmm think I’ll pause the vyand me a cold Modeleo beer 🍺and a blunt 👍👍👍👍👍great video
Awesome video bro! You’ve inspired me to dust the old school Jammin off and get back out here!
You should!
My man got the setup! Good stuff can’t wait to see that Reds on the trackk rippin it up
Yes sir, Sunday I'll be running her!!!
Good tip on marking the fly at BDC
Mines got up to 250 in the first tank for a bit should I be worried?
Just finish break in my new Picco rebel xl by yours tips and advice 😎thank you!
Hey Rajaa, love you video dude! I was wondering if you have a video break down on engine breaking in. I'm a newbie when it co.e to nitro. I've been running electric rc but got into the nitro and would love to properly break in my new kyosho inferno neo st 3.0 can you help me maybe explain a few thing like "rich and lean"
You got it brotha, give me a few days
Thank you
Question I thought I had a motor that was broken in but it wasn’t. So is there such a thing to restart the break in process.New to hobby
Räãjah 111 what did u use 2 put the straps on starter boxx and if possible were did u get em.. thankx
I just use and straps I had laying around, I believe I just cut some old ratchet straps I wasn’t using
Engine break in time !!! YES ! Beautiful Engine at that...Boom !
Love these vids man 🤙🏻🤙🏻🤙🏻
Great editorial rajja✋😀😀💪👊
Thanks brotha, I appreciate it 🤝
I'm learning so much from you big bro that's a blessing keep it up big bro RcFam4Life 🤜🏾🤛🏾💯💪🏾✊🏾
Great video!! Got my rc8t3.1 on its way hopefully be out at scope running it in the next few weeks!!!
NICE!!!! congrats brotha, can’t wait to get you out there, you will love the truggy trust me, and if you need any help, you already know where I put at, I’m glad to help👍🏾👍🏾👍🏾👍🏾
Hi, is this considered the newest version that is out I think its the generation 2
It’s the 1st gen, the 2 nd gen have a black head
rajaa111 I think it comes in red as well is this the same one? www.amainhobbies.com/reds-721-scuderia-gen-2-s-series-.21-offroad-competition-nitro-engine-combo-redcobu0014/p1172508
Walter oh yes they do have a 2nd gen with a red head, the 1st gen is a different paint scheme
I'm watching all ur breakin videos bruh I need to know the ins & outs. Yo also show that needle work with the carb I am a brand newbie to this 3 needle nitro level.
Good job
Did you say not to use Byrons 30/8 for bashing and breaking in? Why not for bashing?
You can but bashing you want more oil, so I would go with 30/10 for the added protection when your on the throttle for a long time
Hi rajaa great video.
Please write your steps for break in the motor.
Pablo Guayta give me a little bit
How you doing bro, when setting the carburetor gap should I take the carb restrictor out or set it with it in?
RaSokar1974 always set the carb gap with the restrictor off, once you have your setting then put it back in
@@rajaa111 thanks bro, that is where my problem came from.
What batterys you use for your starter box the ones I’m using atm don’t last long at all an have Tamiya connections
I use a 4s 5200mah battery, it last for weeks, maybe you have a bad connection making a ground and draining the battery
I just put a new piston and sleeve into my cheap rtr engine. I didn’t know about breaking in. I’ve only run it a couple of times, not flat out. Is it worth doing a break in now or too late?
Might be too late depends on how bad you ran it, I would just take it easy for a bit, if there damage you are already too late
Ok, thank you
Great video thanks for the help for the newcomers 👍
No problem, glad it can help
What about the hot oil bath?
That's another great way of breaking in a engine for sure
Hey bro I got the serpent Buggy it's off-road and I'm at the point where I'm ready to break the motor in. the motor says 25% Nitro I have that Bones Brew 20% nitro and 12% oil will that stop the car from starting or have any problems?
No it shouldn’t
@@rajaa111 thanks for the info bruh your the Obama of this nitro buggy thing. So keep the knowledge coming.
Hey bud stick question :I have a quart of VP nitro fuel that still has the seal under the cap but it was purchased in 2015 do you think it would be ok to still use it or toss it? It's been sitting in bottom of my closet until now.
Garrett Feury it should be ok, vp uses metal cans to keep the moisture out and the nitromethane in, as long as it wasn’t in direct sun light you should be ok
A rajaa great video but how you gonna put that dirty header on such a sweet peice of equipment next time just hit it with that scotch brite pad dammm bro i understand get all excited about the motor an break inn that dont matter but next time great information thankx
LoL...I know brotha, I know
Its all good bro just keep that in mind its a bit disrespectful for that sweet motor but im sure you will get another motor peace
She sounds good bro!!
Thats whats goody bro! Good basic information! Not getting all fancy just streight cut fundamental break in nice! Job! Only thing i think is important and maybe i mised but what fuel you use for break in? Whats the mixers you perfer! And how much lubracation do you recommend on break in fuel! Is vital to your break in! Just my 2 pennies! But nice job! Peace!!
Thanks brotha, I always break in my engines on what ever fuel I’m using, the more oil percentage the better, I never break in a motor on anything less then 10% oil, truthfully I never run on and fuel less than 10# oil and alway 30% nitro. I’m going to try this worlds blend that’s 30%nitro 8% oil, a Kyosho factory team driver gave me, he swears by it so we shall see
nice video bro! cant wait to see what it does on the track.. then we will see if you like it better then the FX
Me too brotha, can't wait till sunday
Nice job on the video. Get yourself a headband phone mount. They're cheap and work great. 👍
Jason Auteri thanks Jason, i should have used me go pro headband but I was just being lazy, I’m going to look into the phone headband that sounds like a nice thing to have
Nice engine bro
Do any of you lads run hobao I've been watching your videos for a little while and haven't spotted any
pace maker thanks for watching, I’ve seen no one run them anymore, when hobao was ofna you would see people running them the problem is getting parts
@@rajaa111 the parts for them are so easy to get I've never had any problems with any of mine needing parts or replacing anything I've got too hypers a hyper 7 with a .21 and a hyper vs running a .30
Then I'm rebuilding an old kyosho
I got a hyper ss
@@jamestebay9595 I run a hyper 7 .21
And a hyper vs .30
I'm a big nitro fan have a couple of buggies..I really enjoyed your video!! Just got a sub from me. Thanks
Tuner 72 thanks brotha I appreciate it 🤝
Still waiting on that Nitro Engine Tuning 102...🏎💨
Can't wait to get tekno nitro buggy Rc ima newbie.
Nice, newbie now, pro later, we all started as newbies
DE makes a fly wheel stopper it rubber best think to have ina tool box or a pit bag #100
Nice I have to look that one up, thanks brotha 🤝
Do heat cycles like mark Santa maria
Downloading this video
Rona on chill sup bro
Put the durag on the head lol
Yes sir, nice and cold brotha
Great tutorial mate. Your break in process is not that different from mine.
xrayracer1 yes sir, all of them are pretty much the same except for the oil bath method, are you going to start back to making videos?
@@rajaa111 I might in the future. Unfortunately my mother has been battling cancer for the last 18 months, and my father is in a wheelchair and has only just got out of hospital from a neck operation, so my hobbies have been put on the back burner.
xrayracer1 sorry to hear that, family first, I can’t imagine how stress and pain that must be, no worries UA-cam will be here
So you don't do a novarossi 160c 40,000rpm breaking in. 😄😄😅😅
Lol... not yet but hey it’s still early 🤣
@@rajaa111 I just got this reds 721 gen2 engine. Can't wait to break it in once it stops raining 😀😀 been watching your videos of it and it looks like a ripper 🚀🚀🚀
Clean them pipes man lol
Lol... I know I know I know
#BraapLyfe
Ruined the engine with those pipes man. Get a proper reds one piece pipe 2143
I reds non sono buoni