Replace Oil Pump Seals | Toyota Camry 2.2L 5SFE Engine

Поділитися
Вставка
  • Опубліковано 27 січ 2025

КОМЕНТАРІ • 61

  • @mda1856
    @mda1856 7 місяців тому +4

    I just discovered your videos. I purchased a 1996 Celica Convertible in great condition except for a bad oil leak or two. I am a very experienced home mechanic with over 50 years of maintaining and fixing my cars. All I can say is your videos are outstanding - the best I have ever seen and I am very grateful for the time you spent doing this. It will make my work much easier.

    • @frugaldiy1
      @frugaldiy1  7 місяців тому

      What a nice thing to say to me. Thank you, mda1856! I truly appreciate that you took the time and made the effort to leave me such a meaningful and thoughtful comment. Love fixin' stuff. ;)

  • @kageshadowmane4271
    @kageshadowmane4271 Рік тому +9

    I realize this vid is a year old, but I have watched many videos on the 5SFE and you are by far the most thorough. Please make more detailed videos. Your quality shows that you care. Thank you! Keep it up!

    • @frugaldiy1
      @frugaldiy1  Рік тому +1

      Thank you, Kage, for your thoughtful comment, encouragement and support. It means a lot to Sister and me. Sister and I are residing my house now, and we have soooooo much we want to show and teach your wonderful folks, but I don't have the time to film and edit. Makes me sad. ;)

  • @brookspilcher9312
    @brookspilcher9312 2 роки тому +5

    Wow y'all are a DIY Gold mine easy to understand southern accent repeats the easy to miss .sisterly love and a good attitude. And works with there hands What else could you ask for in a couple of ladies !! Keep on Keeping ON "Y'all"!!

    • @frugaldiy1
      @frugaldiy1  2 роки тому +1

      LOL! That's a gold mine comment. Thank you for that and your support! Y'all be good now---ya hear!

  • @ponomohometogo3908
    @ponomohometogo3908 2 роки тому +3

    Thats the cleanest engine I've seen in UA-cam.... my 95 camry 2.2 is leaking badly... not sure where yet but going through the elimination process... 27 yr old fossilized plastic gaskets and grommets... tubes and misc. .... all due for replacement so 206k miles start to look like a newbie to me... cheap...

    • @frugaldiy1
      @frugaldiy1  2 роки тому +3

      Ponomo, I call my '95 "Stella," and I just love her. They're gonna have to pry her from my cold, dead hands. She's a beast. :) I think it's well worth keeping your '95 and fixing the leaks(s) because these 3rd generation Camry's are stalwarts! As we changed the timing belt and seals, I gave her a good cleaning as I went. On your '95, if it's an oil leak, I'd look at the oil pump gasket (especially if it leaks when it's running), the valve cover gasket, the oil pan FIP (form-in-place) seal and the cam and crank seals. If it's leaking trans fluid, I'd look at the rack and pinion. Thank you for your comment.

  • @ganeshnarayan5505
    @ganeshnarayan5505 2 роки тому +4

    Thank you ladies for this video i'm doing a timing belt on my 1997 Toyota Camry so i thought i will do the oil pump seal and the gasket really appreciated your video.

    • @frugaldiy1
      @frugaldiy1  2 роки тому +2

      You're welcome, Ganesh (beautiful name, by the way). I'm glad you find the video helpful. You're so smart to change the oil pump seal and gasket when you do the timing belt. We changed the crankshaft and camshaft seals too. Hopefully no leaks for years to come. ;) Merry Christmas, Ganesh!

    • @ganeshnarayan5505
      @ganeshnarayan5505 2 роки тому +1

      @@frugaldiy1 Thank you Merry Christmas and a happy new year to you all Stay safe.

  • @xj220sc
    @xj220sc 2 роки тому +5

    Thanks for making this video!! Love your accent❤

    • @frugaldiy1
      @frugaldiy1  2 роки тому +1

      Oh, that's funny! You're welcome, xj220sc. I was born and raised in the South, and the Southern drawl has never left me. You can take the gal out of the South, but you can't take the South out of the gal. ;)

  • @andrewcoulter525
    @andrewcoulter525 Рік тому +3

    If you don't have that OEM tool you can remove the pump without releasing the pulley. Once the pump is out of the vehicle you can use your impact wrench to remove the bolt holding the pulley.

  • @Buuttcc
    @Buuttcc 2 роки тому +3

    Very nice job. Easy to understand and lots of good information.

    • @frugaldiy1
      @frugaldiy1  2 роки тому

      Thank you, Butch, for taking the time to leave such a nice comment. Much appreciated.

  • @PedroSanchez-vj3qc
    @PedroSanchez-vj3qc 2 роки тому +4

    What a great informative video, very detailed helped me get the job done ! Thanks !

    • @frugaldiy1
      @frugaldiy1  2 роки тому

      You're welcome, Pedro. Thank you for your kind words. I'm so glad the video helped you. Happy DIYing!

  • @jennymunger2758
    @jennymunger2758 3 місяці тому

    You gals are awesome ! Thanks for all your help videos..

  • @sweathe3819
    @sweathe3819 7 місяців тому

    This video is great and very informative.
    Thanks!

    • @frugaldiy1
      @frugaldiy1  7 місяців тому

      You're welcome, and thank you. ;)

  • @Noey001
    @Noey001 11 місяців тому

    Thank you ladies!! A job well done. Thank you for sharing your knowledge and time. Appreciate it.

    • @frugaldiy1
      @frugaldiy1  11 місяців тому

      Thank you, Noey. It's or pleasure sharing our DIY stuff with others. ;)

  • @abgrowing87
    @abgrowing87 Рік тому +1

    Best diy video ever 🙏🙏

  • @aldellano8621
    @aldellano8621 2 роки тому +3

    Great information and video. Thanks 👍

    • @frugaldiy1
      @frugaldiy1  2 роки тому

      You're welcome, Al, and thank you.

  • @alfredomarin3793
    @alfredomarin3793 Рік тому +1

    Just curious if I’m replacing the pump would I still need the tool to remove and re install ?

  • @scottnetworking
    @scottnetworking Рік тому +2

    Great video, thank you.

    • @frugaldiy1
      @frugaldiy1  Рік тому

      Thank you, Scott. I appreciate that. ;)

  • @killachuck900
    @killachuck900 2 роки тому +1

    Came in clutch thank you

  • @doelquinonesdiaz9896
    @doelquinonesdiaz9896 2 роки тому +3

    Thank you !! i was able to do it with your help

    • @frugaldiy1
      @frugaldiy1  2 роки тому

      You're welcome, Doel. I'm so glad the video helped you do the job yourself! Job well done!

  • @michael-annikey
    @michael-annikey 2 місяці тому

    super. А вот заметил нестандартный стабилизатор! - с чегоон? или как его заказать?

  • @danielspindaniel4225
    @danielspindaniel4225 2 роки тому +4

    Very nice!! Thank you!!

    • @frugaldiy1
      @frugaldiy1  2 роки тому

      You're welcome Daniel, and thank you!

  • @billythomas4527
    @billythomas4527 7 місяців тому

    ALSO is it possible to be able to perform this job and only this job and nothing else, or one really have to remove the timing belt in order to access the pump pulley seal ?

  • @mekonnenkahsay4319
    @mekonnenkahsay4319 Рік тому +3

    Very well done thanks

    • @frugaldiy1
      @frugaldiy1  Рік тому

      Thank you, Mekonnen, and you're welcome.

  • @tonyhighwood6935
    @tonyhighwood6935 2 роки тому +3

    Very good easy to follow save me $ to do it myself thank

    • @frugaldiy1
      @frugaldiy1  2 роки тому +1

      Thank you, Tony. I'm glad the video is helpful to you.

  • @The13thSword
    @The13thSword Рік тому +2

    Just a few small things. I wouldn't use a *metal* tool to put grease on the inside lip of an oil seal. I wouldn't want to take any chance of a metal tool nicking or cutting the seal & causing an immediate leak in a brand new seal. I just use my finger or perhaps a wooden dowel rod. Torque Spec - If you don't have an inch/pound torque wrench or your torque wrench doesn't have inch/pound gradations on it, just divide the inch/pound spec by 12 to get the nearest foot/pound measure. Example - 82 inch/pounds divided by 12 = 6.33 foot/pounds. Rounding this up to 7 foot pounds should be no issue. Also, some foot/pound torque wrenches also have the Newton - meter (N-m) gradations on them, & some repair manuals state the N-m spec, so you can use that instead & be good.
    I've seen several of your videos and they are very complete & thoughtful. Very nice work! 👍

    • @frugaldiy1
      @frugaldiy1  Рік тому +1

      Thank you for your thoughtful comment, The13thSword.

  • @alexander19882
    @alexander19882 Рік тому

    The torque for the oil bolts you said .. 82 inch pound or foot pounds?

  • @sierushop
    @sierushop 2 місяці тому

    Excuse me, Madam. Just so I know the endevour... Did you have to take off the oil pan first to remove the oil pump?

  • @ItsPainnz
    @ItsPainnz Рік тому

    i would want hi temp everything

  • @ryantuck843
    @ryantuck843 2 місяці тому

    Thank you 🙏

  • @anonymike8280
    @anonymike8280 3 роки тому +4

    This is a good video but I have done this job, including the oil pump seal. There are marks on both gears of the oil pump. You should line those up according to instructions although I don't see what harm would come if they weren't since the two gears are entirely symmetrical. There are tiny triangle marks on one side of each gear.

    • @frugaldiy1
      @frugaldiy1  3 роки тому +3

      Yes, you're correct about the 2 triangles/arrows, Anonymike. Thank you so much for taking the time to point that out. I chose to mark the sprocket gear and the back of the oil housing cover prior to removing the gear so I could align them precisely when I reinstalled the gear. I think your suggestion is easier to understand and follow. Again, thank you for taking the time to add this information.

    • @anonymike8280
      @anonymike8280 3 роки тому +4

      ​@@frugaldiy1 The hardest part is getting the triangle bracket out. I got a low-priced double flex head breaker and used the 1/4 inch end because it is slimmer.
      In this job, it is very important to pay attention to tightening torques. People need to remember, even on a 4cyl Toyota this is at least $700 job if you pay a shop to do it. If you need to buy tools, then buy them. A low-end torque wrench is better than no torque wrench at all. You will need a 1/4 drive inch-lb torque wrench and either a 3/8 or 1/2 inch torque wrench.
      Tightening torques are given as inch-pounds and foot-pounds.
      I am working on my 2001 Toyota Camry right now because someone who worked on it earlier before I bought it did not torque bolts properly.

    • @frugaldiy1
      @frugaldiy1  3 роки тому +3

      I feel your pain re paying for the sins of those who came before me. ALL of the bolts related to changing the timing belt, e.g., oil pump, camshaft, power steering pump and such, had been over torqued when we got to them. Had to bump start the engine to get the crankshaft bolt off. SMH

    • @anonymike8280
      @anonymike8280 3 роки тому +2

      ​@@frugaldiy1 I did the bump start thing on the crankshaft after a friend told me about it. Real simple. Breaker bar. Socket. One end on the pavement. Bump and off. The crankshaft bolt requires only about 80 pounds of torque. That's not much, no tighter than a wheel nut. You don't have to do weird things to get it that tight.

    • @frugaldiy1
      @frugaldiy1  3 роки тому +3

      I agree. I follow torque when I can. Couldn't torque the 2 back nuts on the water pump because we couldn't get a torque wrench in without removing the oil cooler. Broke my DIY heart. As you pointed out though, us DIYer save a bunch of money doing our own work. Each dollar saved gets us closer to early retirement. :)

  • @dosoffbeats
    @dosoffbeats Рік тому +1

    Good tips ...

  • @marceldinozzo9262
    @marceldinozzo9262 7 місяців тому

    Thank you

  • @billythomas4527
    @billythomas4527 7 місяців тому

    To anyone watching, would silicone grease work just as good as their pink toyota grease ?

    • @frugaldiy1
      @frugaldiy1  7 місяців тому

      Do yourself a favor and use the pink Toyota grease. ;)

  • @jorgewong4145
    @jorgewong4145 2 роки тому +2

    What year is this Camry?