⚠️ Submission Link in UA-cam description! ✅ Check out the Race Spec! newbeedrone.com/collections/featured-products/products/hummingbird-v3-1-racespec-elrs-bnf?aff=75
sittn here, inside voice is saying, unplug it, unplut it, unplug it, lol, for a moment thought you were gonna leave that poor whoop plugged in cookn! lol, freakn shreddn yo! stepn up your freestyle, heck yea man! 👽🛸💦
It's like the camera angles on the regular Hummingbird and this RaceSpec one are at the extremes; the former is like zero degrees and as you mentioned in the video, 40. I wonder what their though process was. I have the regular Hummingbird and just updated the firmware from a few days ago. It runs a lot better. I'm guessing you did too?
I believe the goober has an angle of around 15°, which is pretty low. And yeah, 40 is pretty extreme. If I had to guess, this drone is primarily made for racers, who usually use these more extreme angles. And no, I didn't need to update the firmware since this RS came with an updated tune
Awesome! Does the submission video have to be un-cut or can I edit in tricks into one video? Also the Google Form doesn't seem to have a link or the video submission?
I might be interested in adding one or two to my fleet. The fact that motors are soldered not plugs, takes that goofy plug size out of the mix. Is the osd still problematic? Those were the two show stoppers I have had with NBD
Plugs generally add about 1.0g to the overall weight, and then with the enamel wires, even more weight is shaved off. As far as osd goes, I have a little hyphen " - " at the top of my DVR. I think you can see it in the clips in this video. Or are you referencing a different osd issue? Please consider using the referral link if you decide to pick one up 🙏
@TyranttFPV it's the plug size. Direct solder eliminates that, but still makes motor swaps a chore. Osd, I am referencing the weird way NBD has handled it, not a standard chip. Assuming that's still the same. I don't have a NBD build, but have tried to help someone get osd working on one But if I were buying one to race, it wouldn't be an issue so much
⚠️ Submission Link in UA-cam description!
✅ Check out the Race Spec! newbeedrone.com/collections/featured-products/products/hummingbird-v3-1-racespec-elrs-bnf?aff=75
Bro. Clipping the mic to the beard is genius. When I put it on my shirt the beard will rub it and annoy me in post. You just changed the game
Hahaha, glad to help a fellow beard bro!
sittn here, inside voice is saying, unplug it, unplut it, unplug it, lol, for a moment thought you were gonna leave that poor whoop plugged in cookn! lol, freakn shreddn yo! stepn up your freestyle, heck yea man! 👽🛸💦
Haha, I legit forgot for a second. I guess I wasn't sneaky enough with the unplug of shame 😂
BRO!! That window stall disarm was tiiiiiggght!!!👊
Thanks, I always try to hit that car gap when I can 👊
YAY IT NEVER ENDS!!!!
Mooooor challengeeeesssss
Im definitely joining in in this one! And maaaan that window disarm....money!!
Haha, glad someone noticed that. It's not often I can disarm and recover in a smooth way
Sick flying! And you really need new batteries. Get the aerial outlaws boomsticks. Those are around the same price per battery for the tattus
Thanks! I had a few battery ejects, so I may have repluged and took off with a half empty lipo. Cold weather is also pretty brutal on battery as well.
Beard mic got yu a subcribe from mee, great piloting btw!!
Haha, glad you enjoyed it 😌
LOl... Mic is holding for dear life on that beard.
Naaaah, it has more than enough beard to hang onto 😉
It's like the camera angles on the regular Hummingbird and this RaceSpec one are at the extremes; the former is like zero degrees and as you mentioned in the video, 40. I wonder what their though process was. I have the regular Hummingbird and just updated the firmware from a few days ago. It runs a lot better. I'm guessing you did too?
I believe the goober has an angle of around 15°, which is pretty low. And yeah, 40 is pretty extreme. If I had to guess, this drone is primarily made for racers, who usually use these more extreme angles. And no, I didn't need to update the firmware since this RS came with an updated tune
I'm entering this one dude!
ShaunyD about to power loop his house again to enter
Ahhh yeaaaahhhh
Awesome! Does the submission video have to be un-cut or can I edit in tricks into one video? Also the Google Form doesn't seem to have a link or the video submission?
Whoops! Haha, I'll fix that now. And it can have multiple clips with other tricks. It just needs to have at least one powerloop
I might be interested in adding one or two to my fleet. The fact that motors are soldered not plugs, takes that goofy plug size out of the mix. Is the osd still problematic? Those were the two show stoppers I have had with NBD
Plugs generally add about 1.0g to the overall weight, and then with the enamel wires, even more weight is shaved off.
As far as osd goes, I have a little hyphen " - " at the top of my DVR. I think you can see it in the clips in this video. Or are you referencing a different osd issue?
Please consider using the referral link if you decide to pick one up 🙏
@TyranttFPV it's the plug size. Direct solder eliminates that, but still makes motor swaps a chore. Osd, I am referencing the weird way NBD has handled it, not a standard chip. Assuming that's still the same. I don't have a NBD build, but have tried to help someone get osd working on one
But if I were buying one to race, it wouldn't be an issue so much
Challenge accepted😅
Damn right!
lol, nice mic placement
Haha, I'm glad someone got a kick out of it
Am I missing something? I can't find the link to submit
Check the UA-cam description
the receiver still doesn't bind for some people😒
Even on this updated version?
when？contact newbeedrone？
@@MKST-CA not sure what you mean, but I'd you're experiencing an rx issue, then I would suggest contacting NBD
@@MKST-CA recently, and got jack💩
@@TyranttFPV yep
where do i submit the video man? 👀
Link is in the UA-cam description
oh!, you have something stuck to your beard, or is that beard dreads? ;)