Building a Motorized LEGO AT-TE
Вставка
- Опубліковано 29 вер 2024
- Can you make the LEGO AT-TE come alive? Join Whatnot, get $15 and drop into my stream on September 29th at 6pm EST: bit.ly/3acnoZi
JBB_777's AT-TE Instructions & Parts List: bit.ly/4emKrwk
JBB_777's Instagram (show him some love): www.instagram....
#LEGO #legostarwars #clonewars #whatnot
--------------------------------------------------
Thank You for watching this, don't forget to subscribe and get the latest updates as well as following me on:
INSTAGRAM: / solid_brix
TWITTER / X: / solid_brix
FACEBOOK: / solid-brix-studios
FLICKR: www.flickr.com/...
SITE: www.minifigs4u.com
Don't forget to download Whatnot and get $15 off your first purchase & win the AT-TE giveaway this Sunday at 6PM est: bit.ly/3acnoZi
Need to sell a LEGO set or figures? On Whatnot, they'll match up to $150 worth of sales in your first 7 days! Use the same link above to apply!
Cool! Next Motorized M1 Abrams tank?
Come on show us this on geonosis
Real we need to see thet
You should put rubber pads on the feet so it doesn’t slide as much
Absolutely not, the feet are likely meant to slide, just like the motorized at-at set, and making them not slide could damage the internal gearing even more
@@ArcherJLady if it was built properly it’d be fine
@@Clump666I could not get the forward/aft legs walk exactly in sync with the center legs. The speed during each step varies slightly. If you restrict any relative movement by adding rubber it will stress the gears. LEGO has studs and fixed distances. That makes making the step size you can create fixed at certain specific distances.
Custom technic can be so complex, especially if illegal techniques are used. Technic is already kinda finicky
It looks like a turtle when it walks 😂this is so epic
Ok now I have to try this! Luckily I do actually have a degree in mechanical engineering so hopefully I can figure it out!
That actually explains a lot, honestly. 😂😂
Meticulously Following the instructions should make this work. Any deviation in any of the legs make it walk like a drunken turtle
Wow, really enjoyed watching this. So sorry you weren’t able to get everything aligned well to make it work. I will have another look at the instructions but I am afraid I can’t make something this complex any simpler in the instructions
does the surface it walks on make a difference?
@@correctopinion4708yes. It walks best on flat smooth surfaces. It has a hard time walking on carpet
needs more power for the motor it seems like
6:47 The table also has a lot less traction so it slides around more. I imagine that it would've worked on a carpet or something the first iteration.
The way it walks now looks like it's sick and is dying.
A drunken turtle
It almost feels like the build is meant to be walking backwards, but is moving forwards. I don't know how to explain this
You seriously can NEVER have to many clone troopers. I wish I had all of them.
04:36 It’s not just you. This is why I like building other people’s MOC designs from rebrickable- order the parts, then spend as much time sorting through for a piece or carefully organising and knolling all your orders as you do building the set itself! 😂
That is still pretty cool. I had an issue with *an Official Lego set* The speed champions James Bond Aston Martin DB5, there supposed to be something under the front of the car, but if I put those pieces on, then Front bumper could not fit. At the end, I left those bits out of it and just put the front bumper to the car. And I wasn´t modifying it, it was the official Lego design.
Give that set a try.
If you ever wanted a battle damage AT-TE that’s literally on its last legs this design mechanics is for you 😂
i have the parts. i'll try it out and ask my engineer friend what to do
Its the smooth surface, the legs have no friction. The designer had it run on a lego terrain.. this is the same problem i had with the og mindstorm atat
My first video shows it on a smooth surface. It actually walks best on a smooth surface. Any grip of a single leg will put stress on the gears
@@jbb7774does it work better on carpet or concrete? The legs look they are sliding a bit
JK Brickwork did a motorised AT-TE 3 years ago and it works really well. But it's at a smaller scale than this one.
That's what came to my mind as well, I've considered adopting his mechanism to mine, but I don't think I have the parts to do that, I started to build a concept test and was not able to finish it. His system just has everything driven from the central legs by linkages, and only three gears that transmit the power to the central legs.
I think it’s kinda wild how some people can find the piece they’re looking for amongst 1000s so quickly. I was looking for one specific piece in my mixed black pieces and it took less than 5 seconds to find it a bag weighing about 5lbs.
Very impressive engineering underneath, but looking at it (with some robotics and engineering experience) I cannot diagnose the issue.
Maybe I'll try to recreate just the motorized legs and see what can be done.
I dont have engineering experience but it you recreate just the motorized part of the build to see whats wrong, don't you think it would not show accurately the problems David faced ? cause of the lack of weight your model would have ? idk if that makes sense
@@svenoualpha9673 generally a good point, weight is easily overlooked. in this case, however, i think it's fine, as the issue to be diagnosed is related more to the mechanical timing or alignment imo. and even if that works fine, then you still know that the issue occurs somewhere between just the legs and the whole model.
The problem is clearly that the middle legs extend too far. Maybe it's a flaw of the original model, but I would make the middle legs retract inside the body more to allow the other legs to have more grip on the ground. I feel like the purpose of the middle legs is just to have support in the middle of 'steps'. The motion is just not thought out properly. Of course it's a completely different topic on how to actually achieve what I described.
@@RCmies Yeah unfortunately I cannot see a difference in the length of the middle legs between the working walking motion from the original model designer, and the version built by Solid Brix Studios, so I wouldn't say that's the issue with such confidence. It could be that the model works better with shorter middle legs, but assuming they are the same length in the working and not working versions, there should be a fix outside of that.
@@svenoualpha9673 True, I can try to simulate the weight distribution but I agree with Spoogle that it's more about mechanical timing or alignment. The weight might contribute to those issues.
JBB's motorized AT-TE models are incredibly advanced. Never before have LEGO AT-TEs had mechanisms that move the front and hind legs like they do on screen, and you can tell just by looking at it how complex the gears and linkages are to make that happen. Honestly I have no idea how they came up with it. Definitely unfortunate that you weren't able to get it to work :(
After your tinkering, you had both legs on the same side moving at once. You should have them alternating. Front left and rear right, then front right and rear left.
Whats your opinion on cheesecake?
Overrated
Pie kind of guy..
Too rich. A slice of pumpkin pie for me
Great now I need a brickfilm with this
You should use metal gear in a future video. It could work better.
I dont think its mission failed, I think its wasted
I audibly laughed at 11:15
Wow
Geonosis finale by November?
Your face of defeat at 9:44 David 😂😂😂😂😂
Sweet man😮
I thought you were going to do the bricks and minifigure clemson tour but hey that might be next.😅
😁👍 but I do have a question about LAN.
I want to join LAN but do I joined a group like yours or do i make my own🤨.
Just wondering
If lego ever does another AT-TE Set, they should try this. Great custom David
Thank u for another great video. Next time when u want to take a break from Geonosis, build and review at at by Edge of Bricks. Baufman made a review but I would really want to get your opinion about the model.
Once this is fixed it is only fitting that it is paired with Forged in LEGO's Republic Dropship
Hey man I’m looking at getting my first UCS build and can’t make up my mind. Would you go for the AT-AT walker or the Venator?
I think slight tinkering of Weight and Grip would make it look it a little better and maybe work smoother
Tinkering:
Weight (even if it’s just inside parts that we don’t see or need to see or have weigh down)
Grip/Friction: The bottom should have the blue technic so the feet don’t “dangle everywhere” and some of the connection parts need to have looser movement (mainly the Connecting parts where the legs actually move)
Power (Maybe find a slightly powerful battery, and/or Brand)
Man I'm sorry after all this work this is where it ended up. Don't let it drag you down, this obviously isn't your fault, you gave it your very best and this is just one project that didn't make it out of a thousand that did
Perhaps Lego should work on its own version. I don't recall if the motorized AT-AT sold well (or how well it did or didn't walk), but there is always a market for Clone Wars items, especially is you add a couple of clone troopers!
You…. you didn’t show us if this AT-TE couples with the “ultimate” dropship from your previous video..
Amazing build. Would love to see a motorized AT-AT. Couldnt get passed that you didn't sort the lego pieces. All that time spent hunting and pecking to find a piece. I've got a large lego collection and gave been putting lego together for 40 some years I've sorted all pieces for such a long time I can't just randomly look for peices like a puzzle.
This reminds me of that really cool motorized At-At they released in ‘07, ‘08? What a great example of sacrificing the accuracy of the look - especially proportions - for the benefit of such a COOL function.
I think this scaling probably prevents a designer from truly having their cake and eating it too. In order to make a motorized function that works properly but is also foolproof, design-wise, the look of the thing and the proportions will likely have to be sacrificed.
To add, this is why Lego designers go through SO MANY HOOPS to ensure a smooth build process. I think too few of us older fans truly recognize that effort in our assessment of quality. It is far from an afterthought on the part of LEGO designers. We MOC builders don’t go through that same effort, usually, and when we do, probably not to the kind of rigorous standard Lego does.
It’s a trade-off, as with everything else in life.
9:45 if you hear that cracking sound you should turn the thing off and potentioally get ready to buy new gears, I remember working on something with school mindstorms set with a friend and I recall we grinded at least one gear like that
That’s cool!
This needs more power desperately going to the motor! Poor thing is struggling to move itself
Cool!
But can this still be lifted by the republic dropship moc?
Iv been gathering parts to build that as well, dont give up on it david, maybe take a break from it and come back to it later, iv personally talked to jbb_777 he is a cool guy to talk to and he is an Engineer
Now imagine they motorized all the star wars stuff!
I was so hyped for this vid but im a lil let down very cool idea tho
9:30 You can see him go through all five stages of grief in real time
you probally need to put it on a baseplate so it walks better, your table has no grip so its sliding
Your whatnot says tom 9/28 at 7pm fyi
9:40 he looks like Pinocchio’s father 😂😂
Looks like a drunk Zoid. Just buy a Zoid.
I'd suggest using a less smooth surface
Motorized ucs at at? Anyone?
Perfect for terrorising your pets
HOLY CRAP !!! this is sick !
Amazing! Do you think you could do it with an AT-AT, like the UCS?
Someone online has already been doing it, though I don’t think the instructions are public
Bet, $5 I can fix it.
Wow thats so awesome 👍👍
This is cool as hell
The motorization is cool and all... but honestly LEGO AT-TE builds in that iconic crouching position always look so dang cool.
I'm loving this series of Rebrickable reviews you're doing, though. Keep them up!
Whatnot looks cool
Geonosis please
AWESOME! 😮
sick
Weber Walks
First
Creative
unfortunate you couldn't get it to work. It really is am impressive feet getting a mechanised walking mechanism in such a small and compact model!
It really shows how important it is to make instructions and model building comprehensible and easy to understand. I always spend alot of time and effort into making clear and easy instructions for my models on Rebrickable. It is always hard to objectively tell if your own instructions are easy enough to follow for others. You as the designer often know your build from the top of your head, but for casual builders or new builders it could be quite hard to follow someone else's train of thoughts. What I often do is look at Lego's official manuals and mimic their approaches and step-by-step build sequence (not as dumbed down to a single piece per step, but still understandable). I often test my own instructions as well, to see if everything checks out, and sometimes ask friends of family members that aren't lego enthusiasts if they can follow them clearly. No hate whatsoever to the designer, it is just incredibly difficult to get technic/mechanic models manuals to be easy to follow, and really shows the effort designers put into mocs making the buildable and enjoyable. People complaining instructions are too expensive or shouldn't cost money don't get how much time is needed to make them really good, let alone just make them. Maybe there will be fix in the future, and you will have a functioning walking AT-TE!
Amazing, this reminds me of the motorized AT-AT, they need to do something similar again.
I think the problem is the surface it's walking and not the gears
Oh. My. GOD!!!! I want it! I need it. I am going to build this right now but i donn't have the parts. and the time
Wow.. At first I thought this would be cool to do for myself, but that's nothing for me 😬
Here so early www usually 11 months - 5 years late to a Brix Studios vid
Looks EPIC love how you made it walk done awesome job there 👍
This is like that old clone wars McDonald's toy on steroids
the motion looks so cool. I like that snappy movement at the end
Is the whatnot thing a scam? I dont wanna get scammed
As far as i know you wont get those cheap figs every one is talking about selling, people snipe them
@@biIIybob858 so is it a scam?
I think i would lose my mind if i were in your position lol
That’s looks awesome!
That did not look very stable
Wow that's so cool!
I remember getting the 2006 Star destroyer for Christmas one year. I got about half way through the build, could not find a specific piece (after what felt like an hour of searching to 9 year old me) and just tore it apart and threw it into my Lego bin. I think that’s the only time that happened
Same with my Endor bunker, regret not listening to my mom about bigger sets, I would just open all the bags (that’s how it was at the time I think until late 08/09?) and for that set I opened them all up thinking I would them all, I did, but it was hard to find that one part (didn’t need it but wanted to 100% it
Hi
Noice
You just need some new batteries
I did that as well
Would it have a better shot if it was walking on something other than a slick wood table? Carpet? Or maybe stick some tread on the feet for some friction?
Link to AliExpress?
Spam? Are you kidding me?
You literally do anything but finish geonosis
Rzędzian Skibidi
I just saw this on Instagram. This is what I was waiting to see!!! 🔥🔥🤌🏾