Run a Hard Disk Drive Brushless Motor With A Phone Charger
Вставка
- Опубліковано 8 гру 2020
- Today I will show you how to run a hard disk drive (HDD) brushless motor with a phone charger.
In this video, I will explain how to connect SATA power cable with phone charger and "hack" it to run forever and don't stop.
This tips also apply to Laptop's HDD 2.5".
** LIST COMPONENTS **
- HDD Hard Disk Driver
amzn.to/37Kv7K7
- Digital Multimeter
amzn.to/3hgvaAt
- Phone charger 5VDC
amzn.to/2KRQIas
- Charger 12V
amzn.to/3mHyrtK
#HDD #HDDMotor #BrushlessMotor
!!! DO NOT COPY & REUP !!!
***********************************
- Website: goldscrew.blogspot.com/
- Facebook: / goldscrew-diy-10836235...
- Twitter: / screwgold
- Pinterest: / goldscrew - Наука та технологія
Thanks ❤ your Pin shorting method helped me to run motor continuously
Thumbs up.great research.hard work
Thanks you, so wonderful👍👍
you are very smart and creative
Thanks. so cool🌹🌹🌹
Thank you for useful video. Wife comes in at 8:00 👍
Hey man, so i tried this setup and did work without a problem, But i have a question if you might know or if anyone else does, I have an adapter for the USB that has Output 5V 2.0A or 9V 1.67A or 12V 1.25A. So i was wondering if i can use the 4 wires in the usb cable, red - black to sata red - black for 5V and the other 2 in the usb cable to Yellow - Black Sata 12v and then connect it to the adapter that has all those outputs or would it not work like that because the adapter can only have one of the outputs "active" at a time? Thanks in advance and great video :)
대단합니다
thank you
Thanks ❤
Wow very nice 👌 👏
Good👍
Congrats..
Unfortunately mine doesn't work. I have a 3TB Barracuda DM001 and neither the 6+2 or 3+5 pin shorting works. It stops after 10-20 sec. Plus mine requires the r/w head socket to be bolted on, as I see yours is not, it has contacts on one of the two screws holes. I guess it's a hit and miss, have to try other methods.
You can test 2+6+7 pin.
You connect pin 2 with pin 6 to avoid stop with SATA HDs, do you know if there is a similar connection with IDE HDs? Thanks.
I'm not sure about IDE HDD.
I will research it and update and let you know soon asap.
Thanks for your question!
Bumping this question!
EDIT: Never mind, it's answered below!
PIN 1 AND PIN 2 of data conector. up right 1, up left 2.
Sorry for my bad english.
Thanks for the video , I think we can use a single 12v adapter and a voltage regulator for the 5v input
How to check the motor
Yes, You're right!
Or can also use a booster from 5v to 12v. Very much module/board available for sale right now (but better is from 12v to 5v).
Hope you enjoy :D
Yes , a simple .
Instablaster
@@GoldScrewU need only 1mA for logic at 5V & 1A at 12V for motor driver, booster is nonsense
Best👍👍💖
😍
In case of pata connector which pins has to be connected for running continuously ??
Many IDE type hard drives will spin continuously as long as the power is applied, but not all. In particular, Western Digital drives won't stay spinning in this way, stopping after a few seconds.
first top left and last bottom right, or bottom left and top right, don't remember now.
@@adriel3305 could you tell in detail using pin numbers.
Why do you need 12v& 5v to operate the motor ? Can I only use 12vdc with a speed controller?
Thank you
It’s depending on SATA power standards!
Yellow wire need 12v…and other color need 5v.
You can using only 12v and downgrade from 12v to 5v.
Understanding the standard SATA power supply pins in the HDD | Gold Screw
ua-cam.com/video/biN-sTTtEPI/v-deo.html
the motor needs the 12v and the logic board needs 5v is my understanding and in order for the motor to work even the logic board should be powered up
Hy! Why do i have only 3 wires on the hdd motor?
hey pin connection not working for me, not 3-5 nor 2-6 or 2-6-7.. it stops after seconds, can anyone help ?
I shorted the 3 and 5 pin in sata but it still not continiously spinning, any solution
Try linking pins 2 and 6 instead, but bear in mind that not all drives will work like this - it seems to be a sort of undocumented feature that's not universal across all manufacturers
Love the idea would love to do it myself. Only concern is (and I might be 1000x wrong),would it not burn it out? I mean if you're using something that is resisting against it whilst spinning? Genuinely curious,apologies I'm totally new to this kind of thing.
Keep up the awesome content :)
Thanks for watching,
There are a lot of people who have tried making this grinder with a computer HDD, so I think it will be fine!
@@GoldScrew haha yeah I'm sure it would be and because they're so cheap it would be easy to just make another :)
nice
Thanks for watching :)
@@GoldScrew welcome
Mine doesn't want to start spinning, do you know what the couse could be? Thanks
its fake, motor needs a special circuit called "driver circuit" for it to be able to spim
pin 2 and 6, but my hard drive is ide / PATA. do you have any solution?
Sorry, I'm not sure about IDE/PATA!
My bro,
Why don't you have this written out? Your video is of little help because we can see what wires you are connected to for + and -. Is that the SATA plug you are making your connection to? By connecting pin 3&5 to one another, what is that for/doing? Which wires on the yellow, black, red, and orange connector do we connect to?
just a small listing of what wires you are connecting your 5V + to and 5V - to. If we reverse polarity, does it spin in reverse? prob not if its brushless..
Anyways, text is always best, video is good as a visual reference, as an aid.
thanks man.
Yes, that's right.
I should have explained in more detail. However, because of the time at that time, I did not have much and I also wanted the video length to be moderate.
Why don't you find your own the answer: try reversing the + and - poles...etc? This is not difficult at all.
And please share with me the results :)
Thanks for watching!
Can you please confirm on how to do it for IDE HDDs ?
Maybe you'll need an adapter to switch SATA to IDE
@@GoldScrew thank you for your prompt response and keep up the good work.
@@shouldbewillbe2813 I will trying to find old IDE HDD and make other videos soon.
Thanks for watching!
@@GoldScrew please do pass on the link of video to me as soon as you have made it. Thank You, you are the boss
For IDE drivers you need to jump the first up pin on right corner, with the down pin on left corner. FOr SCSI IDK
Will this process work for dvd drive motors also? 😶 Please reply
I'm not try it with DVD drive motors. But if it's brushless motor, I think it's can run no problem!
Ye
It Will work. I have tried it before
@@emilsamuelsson1001 it didn't worked for cd drives brothers and sisters.. seriously I've tried thrice 😭 .
@@smartgamersify it should work if its a brushless motor that can run with DC powersupply
Pemasangan kabel motor nya bebas atau tidak bos
WHAT!! hdd 3.5" running on samsung are 5 volt... but hdd 3.5" needed 12 volt..
are you samsung charger with fast charge 15W? is 9v
hdd 2.5" laptop is 5v
Cho mình hỏi motor quay liên tục hay khoảng 30s tự dừng vậy bạn.
Nếu không nối hai chân 3 và 5 thì quay một lúc nó sẽ dừng lại bạn ạ!
Còn nếu nối hai chân đó lại (hoặc chân 2 với chân 6) thì nó sẽ quay liên tục.
Mình có nói rõ trong video rồi, phút 6:35
ua-cam.com/video/_v-i3_wLuoU/v-deo.html
@@GoldScrew Mình nối cả 2 cách mà vẫn bị quay 30s rồi dừng. Vậy mới chán chứ.
@@MeowCuteness Thế thì khó hiểu thật. Vì mình thử cũng phải 2,3 loại ổ cứng của các hãng khác nhau như Seagate, Toshiba...thì đều chạy ổn cả!
Chân 3 và 5 không chạy, 2 và 6 cũng không chạy chỉ được 15s
@@MeowCuteness Như mk nối rồi vẫn chạy 30s rồi ngắt
👍
Hello. Can we use a 5V adapter and a regulator instead of the 12V in order to control the motors speed ?
The best is 12V, because the brushless motor required 12v. So if you want to use 5v, you'll need a DC-DC boost converter
@@GoldScrew i tried it and it burnt the motor. Any explanation for that ?
Maybe something wrong at wiring step!
I can’t see more detail your issue, only text here is very difficult. So I don’t have any ideas 💡
@@abbashammoud7205 probably you connect it wrong or the voltage is too high
How to run the laptop's old ide harddrive?
I’m not test with IDE. So I’m not sure the IDE HDD can be run or not yet!
Nó vẫn bị dừng một chút rồi mới quay tiếp đó bạn.
That hard disk, works both on 12 and 5 volts
Hey plzz tell me , I have 2 black wires and 1 yellow, 1 red
It's same my wires.
Yellow: + 12V
Red: +5v
2 Black: is GND.
Connect it like in my video!
好
Hallo saya ingin bertanya ? Bagaimana dengan hardisk yang memiliki 3 pin .cara menentukan voltase dari 3 in tersebut antara 12 volt ground dan 5 volt nya
I have 4 pin sata cable
Mình làm giống bạn. Thử nguồi 5v và 12v nó vẫn không quay. Chỉ cắm vào nguồn của máy tính nó mới quay thôi.
Nguồn máy tính thì bản chất nó cũng cung cấp nguồn: 12v, 5v, 3.3v thôi mà bạn.
Nên có thể bạn cấp nguồn sai đâu đó thôi. Bạn thử lại xem!
What About ATA HDD
Mình dùng ổ cứng ata đời cũ thì nối thế nào để chạy liện tục được ad. Cảm ơn ad nhiều!
ATA thì mình chưa thử, nhưng mình nghĩ không cần nối có khi nó cũng chạy liên tục rồi bạn!
Giống cái ổ HDD cho laptop 2.5" mình chưa cần nối nó cũng chạy liên tục luôn rồi.
What's the catch here...wat do we gain out of it...kindly explain
You can using the old HDD to make many DIY products: Grill…you can search it on UA-cam!
And with my solution you don’t need ATX power supply or anything else.
Phone charger has only two wire while connector has five wires . Where others wire comming from.
It's SATA standard. You can check other my video to understand it: ua-cam.com/video/biN-sTTtEPI/v-deo.html
5 v ?
Can we take out that bldc motor
Yes
Connection for PATA
😋
Who watch this video in 2021 .... Reply please ☺️☺️
Thanks for watching 😋
What's the point?
It can be used for various projects need, for example grinder, pov led, etc
I tried it but motor can't run any explanation
This method working only with SATA HDD.
If your HDD is ATA...it's can not run!
Rõ là nó chạy 2 mức nguồn
💓🌠🌷👍✔
I did everything exactly like you and it didn't work
What model/brand HDD you used?
Maybe it’s different than my model.
I will update other solution soon asap!
Ban chi can 12v ma thoi
not work why????
Maybe your HDD is ATA or IDE!
This guide apply for SATA HDD only.
Tried this and does not work at all
It works. Make sure not wrong polarity or ended up frying
It work's make sure right polarity or you will fry it
They were right I followed your steps
Either the board doesn’t work
@@jakubthewildbirdsaver2947 yes. The board does not work
Click bait. You also need a 12v DC power supply along with the phone charger.
incorrect, i have succesfully powered an hdd with just a 5V charger.
it’s in the fucking thumbnail
can you tell me how?
@@zalika262.5" hdd use 2.5 hdd enclosure powered from usb phone charger.
if it 3.5" hdd use 3A phone charger and dc-dc boost...
SPEAK YA MUTE
I try not work . 🤔😠
Maybe your HDD not SATA!
This video apply for SATA only, about IDE HDD...I'm not sure about it.
I will research it and update and let you know soon!
menuda pérdida de tiempo
gastos de energía eléctrica
y decís que funciona solo con 5v
y luego con el disimuladamente
pones un cargador de 12 v
menuda estafa no te daremos LIKE