remove and reuse 2 neodyum magnets in the lazer assembly..they are easy to remove and super powerfull for any project needing small square magnets.just pry them out...
Great idea! And well done project! @Mr Electron could you tell me how exact did you change the shafts in this motor? Did you drill something? Thank you!
For salvaging purposes, yes it is a nice video, but seriously, there are no real life usage of CR-ROM and HDD brushless motors. They have no tork and can only work as a simple fan.
Também pode ser chamado de controlador de brushless motor, ou BLDC Controller (Controlador BLDC), tem vários aí pra comprar, tem até um link de um na descrição, tá ali como Brushless Controller).
5:10 ты не боишься отрыва лопасти? на большой скорости он пробьёт грудь 5:10 are you not afraid of the blade coming off? at high speed he will pierce the chest
Serious question, why do maker channels always seem to blast the most obnoxious free music they can find? Interesting concept regardless, getting a quad copter to work with these would be pretty cool.
Fantastic! I have two questions: 1) Is this high speed obtained due to the motor or the driver? Or both? 2) You didn't use it, but what is the function of Hall Sensors in these motors? Or, in what situation to use them? Thanks for sharing the video.
So your xbox cd motor is dead ? Try taking the damaged motor out look for serial number search its serial number on Google you may find replacement parts good luck
I could make a windstorm 😊 NE winds at 25 to 35mph with gusts up to 50kt. I have like 5 of those.also I have tons of computer fans and dc motors and Ac motors but I need help running it on DC.
*Join this channel to get access to perks:*
ua-cam.com/channels/WFbPzBb7dCyCWuBA-DBrMA.htmljoin
*Mr.Electron Patreon's Page* - www.patreon.com/mrelectron
*Hindi Channel* - www.youtube.com/@Mr.ElectronHindi
*Alternator Channel* - www.youtube.com/@mrelectron_alternator
*Watsapp Channel* - whatsapp.com/channel/0029VaQmmRaFCCoWOf7huh3G
remove and reuse 2 neodyum magnets in the lazer assembly..they are easy to remove and super powerfull for any project needing small square magnets.just pry them out...
it was cool that you used your powers to gather the screws.
Rất tuyệt vời với động cơ siêu mạnh từ ổ CD xin cảm ơn đã chia sẻ với khán giả
Great video..that was cool test... I knew those motors were pretty quick. But that was tight.
thanks Mr.Electron i asked to make this video many months ago..now got it...Motor Controller King Mr.Electron
Motorzinho violento hein? Vou usar eles nos meus projetos do Senai
Good demostration have one thank of Argentina
We can make a drone with it wow 👏😀
Es buenísimo. Voy a intentar hacer un dron
Понеслась 😅😅!!!
Maravilha esse vídeo 😀😁😎
Cool my friend... Cool.
Excelente amigo saludos cordiales desde Mérida Yucatán México 🇲🇽.
Great idea! And well done project! @Mr Electron could you tell me how exact did you change the shafts in this motor? Did you drill something? Thank you!
Thankyou for idea now I am planning for making hand made Computer cabinate fan 👍👍
Brilliant idea
@@MrElectron you can make it too also create a video on it. 👍👍
already im tried for rc plane.thank you.
Super
Great you video
For salvaging purposes, yes it is a nice video, but seriously, there are no real life usage of CR-ROM and HDD brushless motors. They have no tork and can only work as a simple fan.
"Torque"... just sayin.
Portable air duster?
Drone fan?
Eat cow
at least they have *some* torque.
very nice video
This is really useful, thank you.
Qual placa você utilizou para controlar o motor ?
english ?
Um controlador PWM, tem vários pra vender aí no mercado livre e afins.
Também pode ser chamado de controlador de brushless motor, ou BLDC Controller (Controlador BLDC), tem vários aí pra comprar, tem até um link de um na descrição, tá ali como Brushless Controller).
Ele deve ter usado um esc
@mr electron he is saying which board you use to run bldc motor
instead of an (small but high RPM) air tool and install a carbide bit....that would be fascinating.
very good 😀😀😀
You arre amazing
Really nice
Nice
Nice video, thanks :)
Muy bien tu trabajo gracias, una pregunta: el motor que abre la bandeja del CD, es de cuantos voltios? Gracias espero tu respuesta....
Wow! awesome 😲
wow sanagt kencang
К чему это всё. Теперь мы знаем что у него есть электроотвёртка и магнитик. Эти ролики как вирус лезут в рекомендации. Задолбали. .
Это к тому что из четырёх старых сидюков можно сделать квадрокоптер.
Can be used for a drone nice
You can make a quadcopter with this motors
I was thinking the same thing
They look pretty powerful for what they are so four of them on a drone that only weighs about 650 g should work
Superb
Amigo donde puedo comprar ese medidor de motores
5:10 ты не боишься отрыва лопасти? на большой скорости он пробьёт грудь
5:10 are you not afraid of the blade coming off? at high speed he will pierce the chest
Будет минус один бесполезный экспериментатор...
Доктор Дью оценил бы)
Eso mismo estoy observando, demasiado peligroso.
Solder helping?
Awesome
Can you believe that? So much work has been done just to make one disc drive.
They've made billions of them, do you have a simpler method?
Super fast
Where can I buy copper winding wire
Serious question, why do maker channels always seem to blast the most obnoxious free music they can find? Interesting concept regardless, getting a quad copter to work with these would be pretty cool.
Thanks for the videos, one question, where did you get the circuit for the motor control?
Link is in description
How did you figure out wires ? as i got few drives and want to do same project. rgds
4x motor for quadcopter powerful
N E X T L E V E L
So next project = drone with 4 of these motors?
А накуя мне моторчик с пропеллером?
Now why not attemp to make a drone out of this? Cool video idea I guess.
Drone? WTF is a drone? You mean Quadcopter?
@@mickcarson8504 Drone, quadcopter it's the same thing but how come you don't seem to know this?
@@harryjohnson615 yeah, a drone is just an unmanned vehicle smh KEKW
More!))
Do a mini drone
what is the reference of the helix?
Моръ...моръ
How to run this motor device
Nice vedio
Ok đấy
Super bro
How to directly connect this bldc with usb charger cable
Make a video on wind turbine with altornetor
Fantastic! I have two questions:
1) Is this high speed obtained due to the motor or the driver? Or both?
2) You didn't use it, but what is the function of Hall Sensors in these motors? Or, in what situation to use them? Thanks for sharing the video.
Both. Hall sensors identify the polarity/position of magnets
What is that Amper?
How much volt did you give for 16,5krpm? Can it handle 24v?
That's almost the same one I'm taking apart. Need to do step 1:00 and 1:06
عندي اكس بوكس العادي القديم السيدي ماتة يشتغل بس ماعرف يقرأ اقراص لا أكد اسوي مثلك
So your xbox cd motor is dead ?
Try taking the damaged motor out look for serial number search its serial number on Google you may find replacement parts good luck
BUNA TREABA FELICITARI
How do you remove the top of the motor? (3:23)
Какой толк от видео, если ты не показал подъемную силу?
ممكن شرح دائره التحكم وطريقه صنعها في فديو
أكتب هاذا العنوان في قوقل / دائرة تشغيل موتور الهارد ديسك | brushless HDD motor driver circuit
Ok felicitari
Preciso de um variado de velocidade pra ligar no esc
legal
Cái mạch để điều khiển moter đó mua ở đâu vay a.thanks
Nice music
4:50 можно смотреть. Неблагодарите
You can also desolder the motor
bro which bldc motor drive module u using?
Way to go.
Can i use this motor from aeroplane
what is the name of the first music?
I told u i was right
Cool, but where can I get such an engine control driver?
Need to make it with the driver already on cd room board
Reutilizar ? Ele só desmontou e ligou ....
YO... The motor was faster than 16500 rpm. it was somewhere around 20500 rpm.
what kind of bldc are you currently using ?
ครับ
Sir create this brushless motor speed controller
Pot sa leg motorul direct la 12V, fara controller? Care fir este +/-?
December 4, 2021 - global online- conference "Global Crisis. Time of Truth". DO NOT MISS!
I could make a windstorm 😊 NE winds at 25 to 35mph with gusts up to 50kt. I have like 5 of those.also I have tons of computer fans and dc motors and Ac motors but I need help running it on DC.
Wow
Please how to make this motor controller in another video
I bought it from banggoods.Link is in the description
Сколько приседаний?. 😁 контроллер какой?
English ?
@@MrElectron Руссо туристо облико морали фирхштэйн?
@@MrElectron дойчь
@@MrElectron уважайте людей
@@MrElectron oo ya - ya dast iz al'ban pihin
3 mas y haces un dron casero
Blessings
se puede probar con controlador de visicleta
Creo que se quemaría
потом этой лопастью по яичку 🤣🤣🤣🤣
entonces se podria fabricar un DROn cone l?
Creo que no tiene la misma potencia que demuestran ahí