Very slow guys ..Anyway pre-cast is not widely use for high rise bldg.in Philippines due to earthquake.Although some use pre-cast for high rise in the external perimeter walls. Glass panel walls common for high rise also.For my opinion more faster to install the panels if provided by block out on the slab.
Jtx, just because the workers are underpaid, non-union, poorly-trained, and in many cases lack basic safety measures such as steel-toe boots, that doesn't _absolutely_ mean that the prime contractor (and local gov't) is pure scum... but it's a pretty solid indicator. ;')
Despite the impressive number and spacing of rebars, this after-the-cast grouting is never going to be as strong as cast-in-place tunnel forms... and after (admittedly casual) observation, I can't see that it's any faster either... pity.
The real pity is your total lack of understanding of the bigger picture. Speed of erection is a key benefit of larger scale precast installs. Yes, CIP forms have their advantages and, also, the exposed finished product looks better IMO. Unfortunately, the raw concrete is often covered up with finishes. Ultimately, the benefits and disadvantages of each method should be evaluated on a per project basis. Thanks for the video.
Beautiful work guys. Be well and be safe... Love from Samoa
Thank you.
Once the first panel is locked in it's prity straight forward from there nice work
Absolutely correct. However we should do verticality & alignment checks for each panels in two perpendicular directions.
Still watching. I hope I see how it is locked in, so it is firmly in place
Instablaster
IAM precast installer ... Good job bro.
Doyakx Salugsugan Thank you!!!
Where place bro
Roman Nagu Singapore
What will be the cost of precast wall construction method in Tamil Nadu ,India
Sir I worked as a Precast Draftsman in Dubai for 4 years and now no job. Are there any vacancies?
Remember Ronan Point !
Yes of course.
what were they filling in the end ?
They were grouting the rebar splices.
non-shrink grout
thanks for sharing
Welcome Sir
Very slow guys ..Anyway pre-cast is not widely use for high rise bldg.in Philippines due to earthquake.Although some use pre-cast for high rise in the external perimeter walls. Glass panel walls common for high rise also.For my opinion more faster to install the panels if provided by block out on the slab.
Seismic Loadings also considered in the design of precast elements. Therefore should be adequate enough to resist earthquake.
Hi, The video is very impressive. I would like to ask for permission to use few seconds from this video. How may I be in touch with you?
Plz tag me as well
It's incredibly obvious these laborers were absolutely clueless, I'm surprised the thing didn't fall down as they were building it.
I'm precast installer good job
Muhammad Ismail Thanks
Jtx, just because the workers are underpaid, non-union, poorly-trained, and in many cases lack basic safety measures such as steel-toe boots, that doesn't _absolutely_ mean that the prime contractor (and local gov't) is pure scum... but it's a pretty solid indicator. ;')
where is this place anyway? allow me frankly, comparing with cast-in-place method this precast building is.....
It’s in Singapore. You can compare the Precast method with cast-in-place method
I want to see more
Susan Scarlet-Macaw we will update more videos
Mera 3 Sal Ka experience Hai Humko kam se hai
Thank you
Despite the impressive number and spacing of rebars, this after-the-cast grouting is never going to be as strong as cast-in-place tunnel forms... and after (admittedly casual) observation, I can't see that it's any faster either... pity.
The real pity is your total lack of understanding of the bigger picture. Speed of erection is a key benefit of larger scale precast installs. Yes, CIP forms have their advantages and, also, the exposed finished product looks better IMO. Unfortunately, the raw concrete is often covered up with finishes. Ultimately, the benefits and disadvantages of each method should be evaluated on a per project basis. Thanks for the video.
Thank you for the explanations.
what type of grout from e-mix are you using?
PE non-shrink grout