Finally Hovatek is making reviews/videos on Miracle box software. I have long waited for this.Much help would be required on this. This software over sometimes now have bin agreed to b suited in flashing China Mobile phones.
Been having a hell of a time trying to make a backup of a Onn 7in table with the 8168B about to try this method now i just need a good boot.img i can patch with magisk
hello, great tutorial. I have a smartphone with Mediatek MT6734A chipset(Cubot Dinosaur). Can i use your tutorial for a full backup with your tutorial? thanks
I read my intex phone using scatter method. But after creating the scatter file, i can't flash that read firmware on Sp flash tool. It shows "chip type not match. Target effuse value..." I had seen solution for this by you somewhere, but i can't recall now. I remember it has something to do with editing scatter file. Please tell how to do this.
@@HovatekTV ok. Thanks. One question. I rooted my Intex phone (china phone, indian brand) and de-bloated it.After that, i created scatter file using your method. I flashed the created file using miracle box. It is working. Will the same created file work on other phone of the same model, or it will only on my phone as the scatter file was created with my phone? I want to share that file with others by uploading it.
@@Phjghh It depends on your device. Since flashing a backup works fine, its unlikely to have secure boot so you're good there. The only other obstacle is variants. Some models tend to have a lot of variants whose firmware either can't be inter flashed or result in bugs when inter flashed. You should be able to use this backup on other phones of the same model, just backup their firmware before flashing as a precaution.
@@HovatekTV ok. Thank you. Your answer made me think about hardware version of phone. I want to upload that created flash and mention about hw version. What is your country?
Mr Hovatek i have tried to install all the necessary drivers o n my pc but it dosent detect mtk phones............................am just usinng s miracle crack i dont know if i t can work... thanks
the scattered files created with this tool cant be flash with SP flashtool. please find solution. an error says" Boundary Check failed: rom_end_addr(0x000000000001cfc3)! Next ROM(PGPT): m_begin_addr(0x00000000000)
"the third party inf does not contain digital signature information" help? ive done everything to enable unsigned drivers installation but i cant get it to work at all, just always this error
@@emyx www.supportrix.com/kb/how-to-install-unsigned-drivers-in-windows-10/ Try this, i cant remember exactly how i did it but i think its one of the methods listed there
sir please in ur tutorial you said copr preloader.bin from miracle box backup but when i checked no backup please help me the backup was empty no preloader file
@@fatalexistence5088 That's because this mode has Secure Boot; therefore, it requires a DA & Auth file for flashing. Download @ forum.hovatek.com/thread-23775.html
Please, create a new thread at our forum and our forums reps will provide free step by step assistance see forum.hovatek.com/thread-514.html for how to create a thread
Finally Hovatek is making reviews/videos on Miracle box software. I have long waited for this.Much help would be required on this. This software over sometimes now have bin agreed to b suited in flashing China Mobile phones.
![[Revised] How to use SP Flash tool to flash Mediatek firmware](http://i.ytimg.com/vi/FIXxswsvi5w/mqdefault.jpg)
![[Revised] How to use SP Flash tool to flash Mediatek firmware](/img/tr.png)
Finally Hovatek is making reviews/videos on Miracle box software. I have long waited for this.Much help would be required on this. This software over sometimes now have bin agreed to b suited in flashing China Mobile phones.
Great work as always
Thanks for clear explanation
Great, worked perfectly. Thanks.
Been having a hell of a time trying to make a backup of a Onn 7in table with the 8168B about to try this method now i just need a good boot.img i can patch with magisk
Go to www.hovatek.com/forum and click Ask Question at the top. Explain this and post.
hello, great tutorial.
I have a smartphone with Mediatek MT6734A chipset(Cubot Dinosaur). Can i use your tutorial for a full backup with your tutorial?
thanks
Bro, can i flash the backup firmware from cm2 to miracle box?
it is working very well,but not on all mtk 7.0 android version
I'm pretty sure it works, even up to 9.0
Would these both method dump entire emmc image?? incase I loss my iemi, wifi & bt etc, restoring the dumped emmc image would resolve the issue???
its not working on my MT6753 it does not detect, but my Smartphone Flash Tool does. How can i fix that?
Select Right CPU Model .
sir, why backup userdata using miracle thunder file size 12GB,system just 2GB
Userdata is usually very large hence the need to skip it
Hi i have followed all ur step but my start button is greyed out what should i do?? please reply fast
My miracle thunder stops responding whenever I want to backup as scattered files
What version are you using?
"Unstable comport" using Miracle Box Ver 2.93 to save scatter file for Alcatel Tetra 5041C
please why is my miracle box ... writen as miracle box (thunder)
and its not working like yours as u explain
It depends on your phone and sometimes drvers. What error are you getting?
I read my intex phone using scatter method. But after creating the scatter file, i can't flash that read firmware on Sp flash tool. It shows "chip type not match. Target effuse value..."
I had seen solution for this by you somewhere, but i can't recall now. I remember it has something to do with editing scatter file. Please tell how to do this.
you best flash back using miracle box. To use SP flash tool, refer to forum.hovatek.com/thread-24287.html
@@HovatekTV
ok. Thanks. One question. I rooted my Intex phone (china phone, indian brand) and de-bloated it.After that, i created scatter file using your method. I flashed the created file using miracle box. It is working. Will the same created file work on other phone of the same model, or it will only on my phone as the scatter file was created with my phone? I want to share that file with others by uploading it.
@@Phjghh It depends on your device. Since flashing a backup works fine, its unlikely to have secure boot so you're good there. The only other obstacle is variants. Some models tend to have a lot of variants whose firmware either can't be inter flashed or result in bugs when inter flashed. You should be able to use this backup on other phones of the same model, just backup their firmware before flashing as a precaution.
@@HovatekTV ok. Thank you. Your answer made me think about hardware version of phone. I want to upload that created flash and mention about hw version.
What is your country?
Mr Hovatek i have tried to install all the necessary drivers o n my pc but it dosent detect mtk phones............................am just usinng s miracle crack i dont know if i t can work... thanks
the scattered files created with this tool cant be flash with SP flashtool. please find solution.
an error says" Boundary Check failed: rom_end_addr(0x000000000001cfc3)!
Next ROM(PGPT): m_begin_addr(0x00000000000)
you flash back using miracle box, not sp flash tool. To use the scatter on sp flash tool, see forum.hovatek.com/thread-24287.html
Hovatek Thankyou so much. Now I will try tbis out.
"the third party inf does not contain digital signature information" help? ive done everything to enable unsigned drivers installation but i cant get it to work at all, just always this error
nvm finally got it to work
@@igorpadurjan5714 hey i have same problem, mind sharing how did you fix it?
@@emyx
www.supportrix.com/kb/how-to-install-unsigned-drivers-in-windows-10/
Try this, i cant remember exactly how i did it but i think its one of the methods listed there
sir please in ur tutorial you said copr preloader.bin from miracle box backup but when i checked no backup please help me the backup was empty no preloader file
ensure you selected Save as Scatter and tick preloader from the list when prompted
Nevermind I'm more having trouble with a different error. I keep getting the "none usb port, maybe driver not installed error".
What's the device model?
@@HovatekTV Alcatel Tetra 5041C
@@fatalexistence5088 That's because this mode has Secure Boot; therefore, it requires a DA & Auth file for flashing. Download @ forum.hovatek.com/thread-23775.html
i can't find my VCOM drivers
tnx
pls sir i just want to find out how to backup phones with DA like ka7, f3, 606 pls sir fast responses
you need to load their DA file forum.hovatek.com/thread-23733.html
please hold on to connect with phone... what you mean by that?
What timestamp of the video are you referring to?
Hovatek need the phone is off to do this instruction?
and last what is the bootkey?
Please, create a new thread at our forum and our forums reps will provide free step by step assistance
see forum.hovatek.com/thread-514.html for how to create a thread
Hovatek is this your video? why you dont know how to answer my question?
I asked you a question but you didn't answer. Please, read my previous replies
That backup Can i flash in sp flash tool?
No. Not directly unless you follow the steps at forum.hovatek.com/thread-24287.html
please give me a link or some info
thanksss
Realme C2 Helio P22 can possaible to backup ?
Yes, so far you have the right Miracle Thunder version and DA file (if your model has secure boot)
@@HovatekTV please guide which version support and share download link
@@MathanTech try 2.82 @ forum.hovatek.com/thread-15700.html
mine displays no network and it says invalid emei what can i do????????????????????????????????????????????
forum.hovatek.com/thread-116.html
Will this tutorial also work for Android Nougat
Adebayo Michael Yes
Hovatek i also want to flash a magisk patch_boot.img with Miracle Box, Do i need to unlock my bootloader first?
No you don't
Hovatek hello admin.. Do i need to change a Magisk patched_boot.img to .bin to flash it via Miracle box?
Please i really need your response
usb unstable device : LG X4 2019
Its unlikely to work especially if you're using a cracked version
@@HovatekTV how to flash ROM for this device it softbrick when I used LG UP to Downgrade to Oreo
@@Eivraiiih Go to forum.hovatek.com and click Ask Question at the top. Explain this and post.
sir oreo 8.0 /8.1 read possible
???
yes, depending on the chipset
Can i still use this method if my phone is rooted?
Yes
Hovatek thank you!! And also last question if my phone is rooted and i want to backup its stockrom will my rom be rooted or fresh?
carlofer braza it'll be rooted to
Oppo Reno 2z back ho
Are you using box/dongle or the crack?
file Virus
Finally Hovatek is making reviews/videos on Miracle box software. I have long waited for this.Much help would be required on this. This software over sometimes now have bin agreed to b suited in flashing China Mobile phones.
hello brother habib
is the tutorial using the box or miracle box set up? I am confused. Thank u!
Great, worked perfectly. Thanks.
i guess I am pretty off topic but do anybody know of a good website to watch newly released series online ?
@Gideon Dariel I use Flixzone. You can find it by googling :)
@Houston Rowan yea, have been using flixzone for since march myself =)
@Houston Rowan thanks, signed up and it seems to work :) I appreciate it !
@Gideon Dariel Happy to help :)