Do you require any part of this cartridge? We can supply you at a very subsidized rate. We even supply empty cartridges for reuse. We can supply parts of most of the cartridges.
Hello , this Ahmed from Egypt, I need the full image unit for Lexmark No. XM3150, Is i have to clean the rubber drum, the image show lines in th time that the drum is beautiful clear , my mobile and Whatsapp no is +201003641898
@6:46 it is written: "Fill the toner assembly with around 50 grams of toner." Why when I just emptied and cleaned the assembly? And where to get these 50 grams of toner? Can I use the removed one?
I've got an MS610dn with spots of toner about every 95.7mm. I replaced the drum recently and it was going fine until this week. What do you think could be the problem? I found a spot of toner on the drum at that location. I cleaned it with an alcohol wipe, but it came straight back.
@@8scottyt I think the toner cartridge loses toner, may be from a detached mylar blade or the recovery blade of the waste toner is defective. The dots could be caused by toner "glued" on the drum. try to clean it with isopropyl alcohol
Hi. I bought a new cylinder but white theet side is not removebable, its fixed and the black collar/bushing does not fit on it. I believe it a new disign but it requieres a new collar part to fit all together. Have you face this problem? Any advice will be appreciate
No, I didn't see any change in the design, it's an old machine I think Lexmark don't make any change however it's not impossible. Remember you have to turn the bushing
Pls need help with Lexmark ms 610dn image unit print plank pages i know the problem with the mechanical part with magnetic roller but i dont know if it can be fixed or not , And thanks for ur concern
Wow, this is so useful. Thank you very much. Such a great guide.
Do you require any part of this cartridge? We can supply you at a very subsidized rate. We even supply empty cartridges for reuse. We can supply parts of most of the cartridges.
I need tonner and chip for this unit.
Whats aap me on 9906351727
Whatsap me 0040724124078
Hello , this Ahmed from Egypt, I need the full image unit for Lexmark No. XM3150, Is i have to clean the rubber drum, the image show lines in th time that the drum is beautiful clear , my mobile and Whatsapp no is +201003641898
abey bizde olmur
Location??
Hello, very good video, how to prevent that doctor blade from getting dirty or to make it last longer clean, so that there are no streaks on the print
It's not possible to prevent the dirty, you can only clean it
Thanks friend r comprehensive guide
@6:46 it is written: "Fill the toner assembly with around 50 grams of toner." Why when I just emptied and cleaned the assembly? And where to get these 50 grams of toner? Can I use the removed one?
The old toner is waste toner, do not reuse it
@@viandant5 Ok, thanks, but why do we have to fill it up with 50 gr and still I dont know where to get it?
@@thomascuk9461 You can find the toner refill bottle on alibaba, aliexpress, delacamp, uninet imaging avoiding ebay
Great explanation... realy helpfull
El toner que se remueve de la unidad de imagen para el mantenimiento, se le recarga con nuevo polvo de toner??
No, debe estar vacío y limpio
I've got an MS610dn with spots of toner about every 95.7mm. I replaced the drum recently and it was going fine until this week. What do you think could be the problem?
I found a spot of toner on the drum at that location. I cleaned it with an alcohol wipe, but it came straight back.
spots of toner are black dots?
@@viandant5 yep
@@8scottyt I think the toner cartridge loses toner, may be from a detached mylar blade or the recovery blade of the waste toner is defective. The dots could be caused by toner "glued" on the drum. try to clean it with isopropyl alcohol
Hi. I bought a new cylinder but white theet side is not removebable, its fixed and the black collar/bushing does not fit on it. I believe it a new disign but it requieres a new collar part to fit all together. Have you face this problem? Any advice will be appreciate
No, I didn't see any change in the design, it's an old machine I think Lexmark don't make any change however it's not impossible. Remember you have to turn the bushing
Do you have the imaging chip information for lexmark ms810? How can I find the information?
What do you mean? There is no way to reset that chip
Pls need help with Lexmark ms 610dn image unit print plank pages i know the problem with the mechanical part with magnetic roller but i dont know if it can be fixed or not ,
And thanks for ur concern
The toner (magnetic) roller is in the toner cartridge. Which is exact the problem?
Is there a toner chip for the lexmark mx321. Where can I find it.
Try Delacamp, Uninet Imaging, Aliexpress
Great video. Can anyone please tell me where I could get the chip for MS610de @ an affordable price.
Uninet Imaging has it, I think you can find it on aliexpress too
thank you
very good ♥ thanks
Good job, but where can I get the chip and drum? thanks
Uninet imaging, delacamp, or try with google bing or something similar
رائع ❤❤
For what is this chip and why to change it?
It's a page counter that after a number of copies will block the printer.
@@viandant5 for what purpuse will it block?
@@thomascuk9461 After a certain number of copies Lexmark thinks that the cartridge is empty
Thanx! Great help
thxx
❤❤❤
magnetic knife