Thanks for watching. I got the lights from Parts-Express. www.parts-express.com/led-fuse-lamp-for-marantz-sansui-kenwood-yamaha-sony-warm-white-8-volt-5-pack--070-121 They have them in cool blue too. I think I use the cool blue ones in this stereo.
Such a beautiful device! Although FM radio in the Netherlands still exists for the coming years, in some neighbour countries it's already replaced by DAB+ No such beautiful DAB+ receivers can be found and no good answer by the audio industry has been found what to do with the radio section of FM receiver/tuner to make the transformation to DAB+...
Hi! I have a Nikko 7070 that makes sometimes some noise, like wind blowing on a microphone. The sound also cracks when I use the volume knob. I guess this might get resolved by some contact cleaner, but I am unable to take off the front part. How did you do that? Thank you in advance!
@@michaellouie4770 I was unable to find them last time but I'll give it a try next time it gets problems again. So far the problem doesn't seem to happen when I turn the amp on, wait a few minutes and only then rise volume and turn speakers A+B on. But if I get again those annoying cracks I will try to find those screws :)
@@raoulduke6043 just take off the metal cover that the feet are attached to. It's 5 or 6 small screws. You don't have to remove the feet. Then you can access the three screws to remove the faceplate.
@@michaellouie4770 Thanks for your help! Contact cleaner on volume and pan knobs should be enough? Or do you think I should do the same on the Speakers knob?
good, solid 30 watts per channel
Where to buy such a backlight for the scale? They all burned out. Only one left working. Your work is great!
Thanks for watching. I got the lights from Parts-Express.
www.parts-express.com/led-fuse-lamp-for-marantz-sansui-kenwood-yamaha-sony-warm-white-8-volt-5-pack--070-121
They have them in cool blue too. I think I use the cool blue ones in this stereo.
Thank you very much for your help! I have Nikko NR-500. Hopefully they will do.
Such a beautiful device! Although FM radio in the Netherlands still exists for the coming years, in some neighbour countries it's already replaced by DAB+
No such beautiful DAB+ receivers can be found and no good answer by the audio industry has been found what to do with the radio section of FM receiver/tuner to make the transformation to DAB+...
Hi! I have a Nikko 7070 that makes sometimes some noise, like wind blowing on a microphone. The sound also cracks when I use the volume knob. I guess this might get resolved by some contact cleaner, but I am unable to take off the front part. How did you do that? Thank you in advance!
take the metal cover off the bottom of the unit, then you can get to the 3 screws underneath the faceplace.
@@michaellouie4770 I was unable to find them last time but I'll give it a try next time it gets problems again.
So far the problem doesn't seem to happen when I turn the amp on, wait a few minutes and only then rise volume and turn speakers A+B on.
But if I get again those annoying cracks I will try to find those screws :)
@@raoulduke6043 just take off the metal cover that the feet are attached to. It's 5 or 6 small screws. You don't have to remove the feet. Then you can access the three screws to remove the faceplate.
@@michaellouie4770 Thanks for your help! Contact cleaner on volume and pan knobs should be enough? Or do you think I should do the same on the Speakers knob?