I retired from 40 years in the business a few years ago. I had studied a bit of Japanese joinery before anyone knew what a cat paw was. I had two faced hammers, one side flat for driving the nail and opposite side was convex to make the last blow to the nail head so as to not leave a dent in the wood. Also they use square faced heads not round so as to be able to nail in a corner. Back then saw blades were called Shark Tooth design. They make their housing joinery slip joints because of earth quakes and that's one of the reasons they use thin pull stroke saws to be able to make extremely intricate joints. The problem with driving in nail that way is that the nail does not enter wood properly. If you look at the tip of a nail two sides are smooth and two sides are Sharp the sharp side should be driven into the wood across the grain to cut through the fibers of the wood so as to not split if you drive a nail into wood with the smooth sides in between the grain you split the wood. Of course that only applies if you're close to the end of a piece of wood and you're using Straight nails like finishing nails doesn't apply to twisty nails I had over twenty hammers cause at one point I collected antique tools. Back then they had some ingenious inventions we long forgot about
Guy makes a 10 minute video about a piece of metal and gets ostracized, Peter Jackson makes 3 x 3 hour films about a piece of metal and he’s everyone’s hero..?!
@@MrMacrun He is talking about the back of the hammer where you use it to pry out nails and yes it is called a claw hammer straight claw or curved lol. What you're talking about is what the hardware store calls a milled face or smooth
Nope - the milled face grips the head of the nail better when driving it at an angle. It means fewer bent nails - nothing to do with saving the galvanising on fixings.
If anything, waffle faces mess up the galv on the heads of nails MUCH more than smooth face hammers do. The feature is strictly a matter of increasing friction. And one doesn't have to drive an extended career's worth of 16d nails to understand this, either.
I didn’t know the waffle cut was for the galvanized finish to me it’s always been easier to hammer in nails because of the texture. I use an estwing like yours however mine did not come with the waffle cut so I took an angle grinder to it and made the waffle cut and it works the same as a waffle cut now. Always a good idea if you already have a hammer to modify it to your needs and get creative especially on a budget.
wrong reason given for head milling. It minimizes slip on modern framing nails with similar head patterns when striking the nail. never had anything to do with preserving galvanized surfaces.
Or, like he said "didn't even notice". Who wouldn't notice that on the top of the hammer? Most of his videos are advertisements, hoping to get people to run out and buy whatever he's talking about. UA-cam wants me to watth them, but his videos are all way too long for what you get out of them.
Stephen November ~ He said in the first _30 seconds_ that the "tip"was at the _end_ of the video. All you had to do was fast forward or click to the end and then _you_ could've gotten to the point "MUCH quicker" all on your own! Don't blame him for your impatience.
hey Vince. I'm 52 and recently helped a friend build a work shed. His nephew had a couple pals to help move equipment. That said I was astonished at how many young men have no clue how to use a hammer 🔨 Were not talking a piece NASA technology here. Thanks for the tool tip 👍🏾
dave foster ~ It was clear right off the bat that the guy talks during the video. But what did you expect? Sign language? When I first discovered UA-cam, one of the first things I noticed about the videos is that nobody ever forces anybody to watch them! If his talking bothered you enough to bitch about it, why did you continue to watch it?
Very nice explanation of the hangers features. I knew about the nail setter function but not the reason for the milled face. Learn something new each day!!!
As being in construction for over 50 years I must comment on a few of your observations, the first being the use of hammers with steel shafts. Those that have worked in framing crews where 8, 10 and longer hour work days of continued hammer use has told old school carpenters that nothing beats a wood handled hammer to save the hand and forearm from continuous pounding . Granted, if you're prone to miss the nail frequently ( I should hope not )and strike the wood shaft.. or if you're using your hammer for demolition purposes, go with the steel shaft. Wood handled hammers are also much better suited for older tradesmen or those with bad joints etc. they're so much better on the hand and arm - as they absorb much of the pounding. As far as the top side nail holding provision - this is not 'modern technology' by any means - this feature was found on hammers for many, many years and a great help when you had to hang on with one hand when you drove nails with the other ... and like the steel shaft hammer were found in many carpenters shoulder boxes - along with a good Plumb hatchet !
You are one heck of a professional, Vince! When I have questions, you are my #1 go to on UA-cam. I truly appreciate the time you put in to keeping brothers in the know!
My grandpa lost his arm and had a hammer with the magnet head so he could set nails and keep working. Those have been around for a long time. This was back in the 70s.
Funny how such a "simple tool", is invaluable for doing any kind of construction type work....and honestly, are very technical when look deeper. My go to hammers: Eastwing Hammertooth(or sharktooth 😉) & Stiletto (which has the magnetic nail holder & a side nail puller). As always, love the tips/tricks videos you share with us. Cheers
hmm.. a milled face is to provide a bit of extra gripping surface to catch and sink nails, even if your angle is a bit off. It has nothing to do with galvanized nail heads. And steel framing hammers are hell on your joints and tendons, especially in your elbow and forearm. I know. That's why I went to a Vaughn 20 oz with a nice long handle for framing 40 years ago. It's all about angle and leverage to drive those nails. The steel estwings are great for demolition or pulling large nails tho. I still have my first one that ruined my elbow.within a year.
I didnt know about the milled face saving the galvanized head on the nails. I always thought it was to "grab" the textured head of a bright nail, so as to minimize bending while striking. Great content by the way.
@@VCGConstruction Our bright hand bangers have a diamond shape texture kn the head. I was told years ago that the waffle head was meant to "grip" the nail head so there is no "slippage"...maybe it serves both nail heads?
Been watching the larry haun building videos lately - such a legend in framing - I’ve noticed he always black taped his hickory handles from the hammer head down at least 4 inches - any clue why he did that ? What benefit would that offer ?!
Wore out my 28 oz. Eswing as a union carpenter, milled face helps hammer blows to grip and direct nail and board as you mount the board. The other feature of the hammer's 'rip' versus 'claw' part, helps you as you remove nails or part boards that need to be reset.
the steel shank and milled face were more than a useful feature, they were needed. Even than straught shank was very used in cleaning the faces of concrete spills on beams and braces. The 'rip' part could be sunk deep, quickly to form a ledger as a brace when you needed a third hand or tie up point. The later vanhang hammer's shock killing plug would have saved many an arm of pain and since I had and its nail setting groove and magnet were nice but too late since it was when I was full speed ahead, pain or not. Smooth faces were basically only for the 'finish crew'.
I learned something new today! Don't believe everything you see on the internet. Much of it might be BS or just one guy's opinion based on his range of experiences.
Thats really cool. I never thought of that. Lol !!!!! I'm an Estwing fan. I use the 28oz flat, the 20oz flat, and the 32oz roofing hatchet. Estwing I think is the best hammer on the market , and has been my choice for ruffly 30 years. I have to say super cool idea on the Husky lmao !!!! Thanks Vince !!!!
@@jerryriggan Yes Jerry there is. In the late 1980's at a True Value Hardware store the Estwing 32oz roofing hatchet was available for purchase. I am a proud owner of the said hatchet. To my knowledge the same hatchet is available at the Home Depot. Please contact Estwing customer service to confirm that. You sir should try one. There great hatchets. Good luck with your research.
@@VCGConstruction yeah, and when you're young, the older guys warn you about that, but being young, you don't listen. I'm young, powerful, feel great. I'll be fine. Then age catches up to you and I'm like, I should have listened. That damn elbow and knee are pissing me off again.
@@VCGConstruction haha Hell no! They're young and as invincible as I thought I was. Love your videos man. I miss my construction days. I still build, but it's with molds, fiberglass and carbon fiber composites now. A lot less physically demanding.
Just gotta take er easy, we only get one body!! Nice talking to you my friend and good luck! I hope to see you around more often!! Have an awesome day!
Awesome. I've never paid any attention to that. I don't have an "updated " hammer. But think that this will be one of my next features to look for on a hammer. Thanks Vince and all of VCG CONSTRUCTION love the videos
Been a carpenter since 1972 and have never heard the nail pulling part of a hammer referred to as jaws. Out west here we refer to them as straight or curved claw hammers.
i can tell you all you need to know about hammers. -1 framing hammers are above 20 oz they are for driving heavy nails 10 penny or larger. can be near 30 oz. have a waffled head and strait claws, aka ripping claw. 2-. middle weight 16 oz may have a ripping claw or curved claw that is better for pulling nails has a smooth head so if you miss you don't tare up the wood like a framing hammer would; use on 4-8 penny nails. 3- finish hammer, 13 oz or less used on trim, molding, that sort of stuff. use with finishing nails. 4- handles: a steel handle will transfer the shock to your arm, wood will brake but will not shock you as much. Fiber handles is what I used. The longer handles gives you more power on the swing. You can use a lighter hammer and still drive the nail. Remember this always pick the nail for the work and the hammer for nail. Always buy a hammer that feels good in your hand and you can swing as long as you have to. Is that easier?
I had a wooden handle, curved claw hammer with a T-shape nail groove between the crotch of the claw and the shank, the nail was held in place by two spring loaded ball bearings. One spring & bearing was inserted into a hole drilled from each side and capped with a set-screw. Nail setting hammers are not new. Taking a nail and pushing it down past the ball bearings was probably not as fast as sticking the nail on a magnet but it was more secure and took more that a little bump to dislodge the nail. I got mine about 68 years ago. Some low-life took a shine to it in the late 1980's.
I've got both of those hammers that you are talking about here. My Vaughan is my newer hammer that I used in the garage door business. When I was in the concrete business I purchased an Estwing and it is also a great hammer.
It's nice to see someone use a hammer for once. Usually I see a carpenter use a pneumatic nailer and shoot 30 nails in a board in under 5 seconds. It reminds me of Rambo.
Very cool bit of knowledge. Video could have been 5 minutes shorter though. Don't tell us what we know. Tell us what we don't know. Thanks for the clip.
Been using a Bluegrass 16oz claw hammer over 50 years. Original hickory handle, no splinters. Never found another with comparable balance. Estwing 20oz straight jaw wrecking hammer is OK for its purpose but for EDC the Bluegrass is in my hand. This hammer was high dollar when I bought it but it has paid for itself 100,000 times over. Yall don't know what you're missing.
Gerald you...like me...probably paid $6 for your first hammer. Mines a 13oz Plumb. Still hittin the nail on the head after 50 years. I bought the “innovative” fiberglass handle !
These days framing hammers are just for finishing toe nails and other nails the gun failed to set deep enough. Just found my old Estwing 28 oz. In the bottom of a bin. I lost track of it 15 years ago after we got a Bostich N80C. For trim I use a rare 13 oz. Plumb curved claw. For destruction I use a proper Swedish Granfors bar paired with the Plumb.
Don't forget the small hole at the bottom of the Estwing rubber handle. It is not used to hang the hammer. When I was a carpenter, I used to set nails above my head. Put the nail head in the hole, swing it and set the nail.
I first looked att the clip without sound. Your bodylanguage tells me that you are perfectly balanced and comfortable with your Eastwing. When you pick up the Vaughan the way you move tells another story. From manoevering with your wrist to swinging the whole arm to do the same work. So I turned the sound on and to my suprise I hear that you consider them totally interchangeble.
He looks like he'd be an awesome renaissance polymath painter! I like sub 12oz 6" ish hammers. I do maintenance and tech, not construction, and most of the stuff I do really shouldn't use *any* nails at all because we like quick repair access. The tiny ones are perfect for noy weighing down a bag for something you hardly use
Not sure what kind it is... There’s no name or manufacturer’s mark that I can see... I took a picture of it but the comments don’t appear to want to allow me to ‘post a picture here on...
No it's not god for drywall. A drywall hammer is waffled but it has a curved head so it leaves a dimple and not rip the paper and a hatchet end to shave of chalk that is excessive on the ends. I guess you didn't have to mud the job and have to fix all the holes you made in the sheetrock.
Now I know somewhere else not to go for advice! As an apprentice of course I was teased, I was asked to go find an "ammerfore" of course I was supposed to ask "what's an ammerfore"? and the reply would have been "knocking nails in"! Fact is in a nutshell I am a master carpenter and joiner of over 55 years, and in that time , like everything else ,, be it fishing gear, shooting gear, tools for every trade, and today especially mobiles, pads, etc etc, the object of the game is to SELL SELL SELL, that is taking as much money from our pockets as possible!! And of course the "tackle tarts" like this guy , fall for it!
I always thought that was a sight like on a gun lol it always fails when u pull the trigger and smash ur self in the face loooool great video Vince my dad has that exact hammer but he paints everything green so no one can steal it
Rare comment but we suggest you and others with the milled face on their framing hammers, should clean up and sharpen the face for more efficient use. The clean up improves strike and impact. Keep up the good work
Saw this same feature on Harbor Freight's 22 oz "California" framing hammer 5 years ago. Not really all that new but not a lot of people aware of it. My favorite hammer is a12 oz. Bluegrass that I use for trim work. Sadly the company is no longer in business as I understand but it is a damn fine hammer for light work. Well balanced with a nice hickory handle.
Do they make another hammer besides estwing? 23yrs and never used another brand. Had a California framer by Craftsman with orange fiberglass shaft that was the only thing even close to the balance of a estwing but they stopped production of the Cali framer after only 2 years in 2002.
Never met an Estwing tool I didn't like, especially their hammers. I have my grandfathers, similar to the first one he held up in this video - unstoppable. Even the grip is still in great shape, and that thing got abused. Stay the hell away from Dead On though, their tools are cast, not forged. Yes, they snap - ask me how I know. :D
I saw nail holders on 1990 German brick hammers . Scutch on one end nail holder with waffle texture working in London in the 90s when all the brickies came back from rebuilding east Germany .
Vinny, Vinny, Vinny...…. Just a few points to make regarding your little 20 minute diatribe.... It doesn't take 10 minutes to explain waffles on a framing hammer. What you should have done is show all the different types of hammer and what they're used for and why. i.e ) sheetrock hammer has waffles and a rounded head to drive the nail in deep enough so it can be covered and not show through A flathead hammer will tear the paper if you try to recess the nail with a flat waffled head it will tear the paper if you sink it the right depth. The round head let's you drive the nail the right depth to make a golf ball sized circular dimple without breaking the paper. Then there's rubber and would mallets, single jack and double jack sledge hammers, roofing hammers, ball peen hammers, a slew of unique hammers for auto body repair, tacking hammer etc. I like having the right hammer for the job. I Example: I used a framing hammer with waffled head to roof my first house. Asphalt shingles and 1" flathead nails. They were small enough that I kept clipping the edge of my finger and the waffle head shredded my finger to a bloody mess. I probably have twenty hammers at least. Here are the most blatant mistakes you made 1. the feature on the other side of the hammer head is a "Claw", no at "Jaw" 2 .The waffle head is for rough carpentry, like framing and decking floors & roofs. It's meant to catch the nail better if you don't strike it perfectly square! Look at any 8 penny or16 penny nail and it has a waffled head that helps that as well. If you use it on galvanized nails it would do more damage to coating. 3. A framing hammer has a flat claw face and a finish hammer has a half round head because you have situations where your swing is limited and you permanently gauge finish wood, and it has a smooth face so you don't put a waffle mark on any expensive wood. I think the steel handle makes for a strong hammer but it sends a strong shock through the arm. I prefer wood or fiberglass. I built my first house with a 20' Vaugn and still have it today 45 yrs' later. But I used a nail gun for my second. 3. If you swing a hammer like you did when you trying to get the feel for a hammer you wouldn't last a week on the job, and probably need elbow surgery. You use your wrist, just like throwing a baseball. You get no power from you arms, it's from that last minute wrist action. 4. I believe that framing hammers are 16" long so you can find where a stud or joist is or where it's supposed to be. That framing hammer you use looks to be about 20 inches. Maybe it's 24" for 24" walls 6. you were showing how you pull out a nail by catching it with the claw and jerking it back towards your body. Besides jamming your wrist and arms . I was an apprentice for a master carpenter who showed me the right way. You hook the nail tight in the narrowest part of v shaped channel of the claw, but you rock it back and forth sideways keeping the head on the surface and it rocks it out easily even from a knot. If you pull nails like that with a wooden hammer it won't last long.. 7. The new feature to hold the nail has probably bee around for 50 years, and it's not meant to set nails when your framing. I can't even comprehend someone loading that thing for every nail he pounded. Think that would double you time framing a house. That feature is for starting a nail where you can't hold it with your other hand. Plus I don't think anyone using it all the time is gonna be an inch or two off most of the time. So you have a wall with nails that aren't exactly in the center of the stud 90 % of the. That makes for unacceptable structural integrity. I wouldn't live in that house. And why are you talking to us like we're retarded or something? I have serious doubts as to your integrity as a carpenter, or even more a Contractor. Be direct and to the point. Don't try drag it out with useless fluff to fill time. It makes you sound like you have no knowledge of the subject whatsoever.
Good video like always,I am not a carpenter by any stretch of the imagination but about a year and some change ago I decided to help other folks out here in the Island after hurricane Maria and like a couple of weeks before the storm I had gone and picked some tools at HD for a small demolition and one was a nice pry bar and the other was that Husky hammer you are showing here today glad I bought them,that is one very decent hammer for the money,it helped me a lot after the storm.
Another uncommon feature I've seen... I have a Craftsman hammer that's probably 20 years old, or more. Unfortunately, I can't find it right now, I think someone borrowed it and didn't return it. Anyways, I think it's 16-ounce or 18-ounce. It has an all wood handle, but it has a steel sleeve covering (protecting) the handle near the head of the hammer. This is where the uncommon feature comes in. On one of the hammers claws, it has a tapered v-groove cut into the end (tip) of the claw. This can be used to pull nails when space is limited. I've seen the magnetic nail starter feature on some hammers, but I don't own one of them.
In my late father in law is an old hammer with a small spring loaded steel ball and a grove cut into the top of the head to hold a nail is you can set the nail one handed. this hammer is over 80 years old at least and is functional. Who knew? Very good video. Thanks.
Love my old estwing 22oz hammer mill face that’s my go to but my recent purchase was the Hart 21 oz mill face and that’s been nice addition.Vince what’s your thoughts on wood handle hammers? Great vid I could talk about hammer for hours
When i was starting out i worked with a old Italian mason.(he was probably 45 yo) and he would erect all his scaffolding out off wood.this was when i first and only time iv seen this done.if he had to nail something at a distance he would place the common nail between his index finger and middle finger right about at the first joint.grasp the head of the hammer over the top head pressing the nailhead against the side of the hammer head.and hold onto something with his left hand stretch out and slam the nail into the board starting the nail using the weight of the head.then he'd throw the hammer up gripping the handle and drive it home.he was very good.and taught me alot of old timer technics.but he was grumpy as hell in the morning.joe marchetti was his name.from philly.good show.thumbs ☝
have hade same experience with old people at the work the knew alot of nice things and one was like a sopange soaking it up but they where grumpy like hell but after the first coffee and smokebreak they where back to normal laughing and telling dirty jokes ^^
I’m no carpenter , but my default hammer is a 6oz Crosspien , with a sawn off handle , I pull nails with pincers , anything I cant pull I cut off , and set , I also have a couple Ti Stilletto prybars .
I retired from 40 years in the business a few years ago. I had studied a bit of Japanese joinery before anyone knew what a cat paw was.
I had two faced hammers, one side flat for driving the nail and opposite side was convex to make the last blow to the nail head so as to not leave a dent in the wood.
Also they use square faced heads not round so as to be able to nail in a corner.
Back then saw blades were called Shark Tooth design. They make their housing joinery slip joints because of earth quakes and that's one of the reasons they use thin pull stroke saws to be able
to make extremely intricate joints.
The problem with driving in nail that way is that the nail does not enter wood properly. If you look at the tip of a nail two sides are smooth and two sides are Sharp the sharp side should be driven into the wood across the grain to cut through the fibers of the wood so as to not split if you drive a nail into wood with the smooth sides in between the grain you split the wood. Of course that only applies if you're close to the end of a piece of wood and you're using Straight nails like finishing nails doesn't apply to twisty nails
I had over twenty hammers cause at one point I collected antique tools. Back then they had some ingenious inventions we long forgot about
10 minutes of total bollocks to get to 20 second point.
I stopped watching as soon as he said "You're going to have to wait around, though..."
Um, no I'm not. See ya! :)
That's what fast forward is for.
Guy makes a 10 minute video about a piece of metal and gets ostracized, Peter Jackson makes 3 x 3 hour films about a piece of metal and he’s everyone’s hero..?!
Arkady Bron .
I zoomed to the point
Dude it's a CLAW not a JAW, that's why they call it a CLAW hammer.
We always called it a checkerd face.
@@MrMacrun He is talking about the back of the hammer where you use it to pry out nails and yes it is called a claw hammer straight claw or curved lol. What you're talking about is what the hardware store calls a milled face or smooth
Nope - the milled face grips the head of the nail better when driving it at an angle. It means fewer bent nails - nothing to do with saving the galvanising on fixings.
Yep that is right
you are absolutely correct.
If anything, waffle faces mess up the galv on the heads of nails MUCH more than smooth face hammers do. The feature is strictly a matter of increasing friction. And one doesn't have to drive an extended career's worth of 16d nails to understand this, either.
Nothing wrong with milled wood this hammer is solid
I noticed that also
I didn’t know the waffle cut was for the galvanized finish to me it’s always been easier to hammer in nails because of the texture. I use an estwing like yours however mine did not come with the waffle cut so I took an angle grinder to it and made the waffle cut and it works the same as a waffle cut now. Always a good idea if you already have a hammer to modify it to your needs and get creative especially on a budget.
I thought the milled face was to help keep from slipping off the nail head
It is...
Made the same point, before scrolling down to these comments.
Why the F would u want to scrap OFF the finish?. Why use a damn galvanized nail then.... what a moron
wrong reason given for head milling. It minimizes slip on modern framing nails with similar head patterns when striking the nail. never had anything to do with preserving galvanized surfaces.
Dudes a clown
So True! Thank you, from a 40 year carpenter. "preserving galvanized nail heads?" . . . . absolute rubbish.
Only way to preserve galvanized heads is don’t strike them with a hammer. Sometimes it do...sometimes it don’t. Come off that is.
Ralf you are right you also can straiten a nail as you drive it with one
That’s what my father told me when he gave me his Estwing.
Who would possibly own a hammer with a nailed-shaped indent on top and NOT think it’s for setting nails?
Ed Urmston ~ You'd be surprised...
Or, like he said "didn't even notice". Who wouldn't notice that on the top of the hammer? Most of his videos are advertisements, hoping to get people to run out and buy whatever he's talking about. UA-cam wants me to watth them, but his videos are all way too long for what you get out of them.
@@DoctorTorque Don't like the program, change the channel
Thanks for giving me the 9 minutes back :)
Your mom
20 oz Estwing claw hammer has always been my fav. Great for overall use. I've even split small wood with it. Lol
In always using the claw to split wood to get at fasteners that are set too deep
He needs to get to the point MUCH quicker.
He just keeps swinging those two hammers. *swing* * swing*
Stephen November ~ He said in the first _30 seconds_ that the "tip"was at the _end_ of the video. All you had to do was fast forward or click to the end and then _you_ could've gotten to the point "MUCH quicker" all on your own! Don't blame him for your impatience.
he does not have one.
The not so much of a secret is @ 7 mins 15 seconds
@Ironfukr 9 You saw ads? I didn't. Ha ha ya nail banger.
I think the nail setting feature is a nice add to older and trusty technology.
Yes sir!!
hey Vince. I'm 52 and recently helped a friend build a work shed. His nephew had a couple pals to help move equipment. That said I was astonished at how many young men have no clue how to use a hammer 🔨 Were not talking a piece NASA technology here.
Thanks for the tool tip 👍🏾
For fecks sake does he love the sound of his own voice or what.
dave foster ~ It was clear right off the bat that the guy talks during the video. But what did you expect? Sign language? When I first discovered UA-cam, one of the first things I noticed about the videos is that nobody ever forces anybody to watch them! If his talking bothered you enough to bitch about it, why did you continue to watch it?
He's no rocket surgeon.....
That's over 9 my minutes I'll never get back..
@@mhwebb8575 get fucked
Its to make it to the over 9 min mark to get better revenue from the video.
Very nice explanation of the hangers features. I knew about the nail setter function but not the reason for the milled face. Learn something new each day!!!
Thanks Shadowz Edge!!
Hangers? Not true about the milled face
As being in construction for over 50 years I must comment on a few of your observations, the first being the use of hammers with steel shafts. Those that have worked in framing crews where 8, 10 and longer hour work days of continued hammer use has told old school carpenters that nothing beats a wood handled hammer to save the hand and forearm from continuous pounding . Granted, if you're prone to miss the nail frequently ( I should hope not )and strike the wood shaft.. or if you're using your hammer for demolition purposes, go with the steel shaft. Wood handled hammers are also much better suited for older tradesmen or those with bad joints etc. they're so much better on the hand and arm - as they absorb much of the pounding. As far as the top side nail holding provision - this is not 'modern technology' by any means - this feature was found on hammers for many, many years and a great help when you had to hang on with one hand when you drove nails with the other ... and like the steel shaft hammer were found in many carpenters shoulder boxes - along with a good Plumb hatchet !
You are one heck of a professional, Vince! When I have questions, you are my #1 go to on UA-cam. I truly appreciate the time you put in to keeping brothers in the know!
Thanks Mr. Magic I try to do what I can!
Two thirds into your video and I’m still not seeing the ‘overlooked feature’.....
My grandpa lost his arm and had a hammer with the magnet head so he could set nails and keep working. Those have been around for a long time. This was back in the 70s.
Funny how such a "simple tool", is invaluable for doing any kind of construction type work....and honestly, are very technical when look deeper. My go to hammers: Eastwing Hammertooth(or sharktooth 😉) & Stiletto (which has the magnetic nail holder & a side nail puller). As always, love the tips/tricks videos you share with us.
Cheers
Thanks Aepek!!
hmm.. a milled face is to provide a bit of extra gripping surface to catch and sink nails, even if your angle is a bit off. It has nothing to do with galvanized nail heads. And steel framing hammers are hell on your joints and tendons, especially in your elbow and forearm. I know. That's why I went to a Vaughn 20 oz with a nice long handle for framing 40 years ago. It's all about angle and leverage to drive those nails. The steel estwings are great for demolition or pulling large nails tho. I still have my first one that ruined my elbow.within a year.
Exactly. I prefer a Vaughn 28 Oz or 32 Oz.
Im partial to you Eastwing 22 oz hammer . I have that same one I been useing in the garage door industry for over 12 years . Its the best !!
I used this feature for framing all the time, after a while it felt like loading a break action shotgun and i got really fast and accurate with it
That’s awesome John, I like hearing how little innovations make work faster and easier! 👍🏻
I would have watched this if the tip was first. I don't wade through small talk to get to the point.
Yet you did. And commented. Awesome.
He told you at the beginning, the tip was at the end. You could have fast forward the video.
Nothing new here this feature was on hammers 50 years ago .
It was placed between the claws and held there be detent balls.
I have a Craftsman 20 oz straight claw. All steel, rubber handle bought 1992. So many nails drove. Still in use & will hand down to a grandson.
I didnt know about the milled face saving the galvanized head on the nails. I always thought it was to "grab" the textured head of a bright nail, so as to minimize bending while striking. Great content by the way.
Do you mean Textured head on a galvanized nail? That’s there for the same reason!
@@VCGConstruction Our bright hand bangers have a diamond shape texture kn the head. I was told years ago that the waffle head was meant to "grip" the nail head so there is no "slippage"...maybe it serves both nail heads?
Been watching the larry haun building videos lately - such a legend in framing - I’ve noticed he always black taped his hickory handles from the hammer head down at least 4 inches - any clue why he did that ? What benefit would that offer ?!
My Estwing 20 oz. straight claw is used for everything. Same hammer is 35 years old and still going.
I have a couple of those Estwing hammers... they were $33 in hardware stores... found mine at closeout in Big Lots for $3 each...
@Connor - The all steel one shown with rubber grip...
Wore out my 28 oz. Eswing as a union carpenter, milled face helps hammer blows to grip and direct nail and board as you mount the board. The other feature of the hammer's 'rip' versus 'claw' part, helps you as you remove nails or part boards that need to be reset.
Thanks Mark we appreciate the feedback!!
the steel shank and milled face were more than a useful feature, they were needed. Even than straught shank was very used in cleaning the faces of concrete spills on beams and braces. The 'rip' part could be sunk deep, quickly to form a ledger as a brace when you needed a third hand or tie up point. The later vanhang hammer's shock killing plug would have saved many an arm of pain and since I had and its nail setting groove and magnet were nice but too late since it was when I was full speed ahead, pain or not. Smooth faces were basically only for the 'finish crew'.
Didn't know that, thanks. I'm still using my unbranded 60's hammers which my dad gave me... They still work fine, even the wood is good
Somethings will always work!!
When you only have a hammer... everything looos like a nail....
I learned something new today! Don't believe everything you see on the internet. Much of it might be BS or just one guy's opinion based on his range of experiences.
Thats really cool. I never thought of that. Lol !!!!! I'm an Estwing fan. I use the 28oz flat, the 20oz flat, and the 32oz roofing hatchet. Estwing I think is the best hammer on the market , and has been my choice for ruffly 30 years. I have to say super cool idea on the Husky lmao !!!! Thanks Vince !!!!
Thanks Stephen Lee!!
No such thing as a 32oz roofing hatchet.
@@jerryriggan Yes Jerry there is. In the late 1980's at a True Value Hardware store the Estwing 32oz roofing hatchet was available for purchase. I am a proud owner of the said hatchet. To my knowledge the same hatchet is available at the Home Depot. Please contact Estwing customer service to confirm that. You sir should try one. There great hatchets. Good luck with your research.
I love my estwings but I got a Hart steal neck 21oz and it has a nail puller on the side of the head also, Great Job Vince👍
Loved my Eastwing. Even though my swinging it at concrete for a number of years damaged my elbow pretty good.
The repetitious movements will get you in the long run buddy!!
@@VCGConstruction yeah, and when you're young, the older guys warn you about that, but being young, you don't listen. I'm young, powerful, feel great. I'll be fine. Then age catches up to you and I'm like, I should have listened. That damn elbow and knee are pissing me off again.
Sorry to hear it buddy! The old timers know the deal, now will the young guys listen to us!?!?
@@VCGConstruction haha Hell no! They're young and as invincible as I thought I was. Love your videos man. I miss my construction days. I still build, but it's with molds, fiberglass and carbon fiber composites now. A lot less physically demanding.
Just gotta take er easy, we only get one body!! Nice talking to you my friend and good luck! I hope to see you around more often!! Have an awesome day!
Awesome. I've never paid any attention to that. I don't have an "updated " hammer. But think that this will be one of my next features to look for on a hammer. Thanks Vince and all of VCG CONSTRUCTION love the videos
Glad we could help! Thank you!
Use your Dremel and add it.
I like when Vince makes these, "Did you know?" segments.
For sure!!! O.k. the milled face on the hammer (everybody knows) is to peel the skin off of your finger if it gets in the way. Makes you feel good.
Thanks - I have the Husky....just looked at it and thought I was missing a piece. I immediately came on here to see what it was for.
Well damn first time seeing that new tech on a hammer. Going to get one in the morning. Heck I owe You a cup of coffee.
Awesome cause I love coffee Ian!!
It's not new tech.....this guy just makes it seem like it...What's next?showing us a chalk line?
@@76shogun1 Well its new to me and I am happy to know about.
Got to say, love my nail starter. I work with concrete and it's a savior.. nailing cat walk bords or strong backs. It makes it a lot easier.
The milled face also is cause 16d nails have a milled face as well and it’s a non slip feature so you hit nail true.)
Been a carpenter since 1972 and have never heard the nail pulling part of a hammer referred to as jaws. Out west here we refer to them as straight or curved claw hammers.
Larry Kirkland same here in the south. Also, I've never heard a cat's claw referred to as a cat's paw.
How you keeping your hands in such good condition?
Dude, it's a straight claw not jawl. I know you're a Joe Six-pack like me but you need to be knowledgeable and credible.
know why a framing hammer is 16 inches long ? .... a layout reference for decking a roof or running sheathing ...
Thanks for the video I leave for a hyper tough stub clawhammer and it has the same function which is pretty dope
i can tell you all you need to know about hammers. -1 framing hammers are above 20 oz they are for driving heavy nails 10 penny or larger. can be near 30 oz. have a waffled head and strait claws, aka ripping claw. 2-. middle weight 16 oz may have a ripping claw or curved claw that is better for pulling nails has a smooth head so if you miss you don't tare up the wood like a framing hammer would; use on 4-8 penny nails. 3- finish hammer, 13 oz or less used on trim, molding, that sort of stuff. use with finishing nails. 4- handles: a steel handle will transfer the shock to your arm, wood will brake but will not shock you as much. Fiber handles is what I used. The longer handles gives you more power on the swing. You can use a lighter hammer and still drive the nail. Remember this always pick the nail for the work and the hammer for nail. Always buy a hammer that feels good in your hand and you can swing as long as you have to. Is that easier?
Thanks for the feedback Mr. Odell !!
I had a wooden handle, curved claw hammer with a T-shape nail groove between the crotch of the claw and the shank, the nail was held in place by two spring loaded ball bearings. One spring & bearing was inserted into a hole drilled from each side and capped with a set-screw.
Nail setting hammers are not new. Taking a nail and pushing it down past the ball bearings was probably not as fast as sticking the nail on a magnet but it was more secure and took more that a little bump to dislodge the nail. I got mine about 68 years ago. Some low-life took a shine to it in the late 1980's.
I've got both of those hammers that you are talking about here. My Vaughan is my newer hammer that I used in the garage door business. When I was in the concrete business I purchased an Estwing and it is also a great hammer.
It's nice to see someone use a hammer for once. Usually I see a carpenter use a pneumatic nailer and shoot 30 nails in a board in under 5 seconds. It reminds me of Rambo.
Thanks Jacob !
He's not using it . Just talking about it, but he dosen't know much.
Very cool bit of knowledge. Video could have been 5 minutes shorter though. Don't tell us what we know. Tell us what we don't know. Thanks for the clip.
Well said!
9 minutes shorter for me
Ditto
Been using a Bluegrass 16oz claw hammer over 50 years. Original hickory handle, no splinters. Never found another with comparable balance. Estwing 20oz straight jaw wrecking hammer is OK for its purpose but for EDC the Bluegrass is in my hand. This hammer was high dollar when I bought it but it has paid for itself 100,000 times over. Yall don't know what you're missing.
I’ll check it out thanks for sharing!!
Gerald you...like me...probably paid $6 for your first hammer. Mines a 13oz Plumb. Still hittin the nail on the head after 50 years. I bought the “innovative” fiberglass handle !
These days framing hammers are just for finishing toe nails and other nails the gun failed to set deep enough. Just found my old Estwing 28 oz. In the bottom of a bin. I lost track of it 15 years ago after we got a Bostich N80C. For trim I use a rare 13 oz. Plumb curved claw. For destruction I use a proper Swedish Granfors bar paired with the Plumb.
Don't forget the small hole at the bottom of the Estwing rubber handle. It is not used to hang the hammer. When I was a carpenter, I used to set nails above my head. Put the nail head in the hole, swing it and set the nail.
I first looked att the clip without sound. Your bodylanguage tells me that you are perfectly balanced and comfortable with your Eastwing. When you pick up the Vaughan the way you move tells another story. From manoevering with your wrist to swinging the whole arm to do the same work.
So I turned the sound on and to my suprise I hear that you consider them totally interchangeble.
Very scientific approach!!
He looks like he'd be an awesome renaissance polymath painter!
I like sub 12oz 6" ish hammers. I do maintenance and tech, not construction, and most of the stuff I do really shouldn't use *any* nails at all because we like quick repair access. The tiny ones are perfect for noy weighing down a bag for something you hardly use
Thank you 2:36, that is literally what I was trying to find out.
Thanks. I do have a ‘fairly new’ hammer (less than a year old)... It DID have this feature (and I never noticed)...
Thanks Douglas, was it a hart hammer?
Not sure what kind it is... There’s no name or manufacturer’s mark that I can see... I took a picture of it but the comments don’t appear to want to allow me to ‘post a picture here on...
7.5 minutes in before he tells us about the "SPECIAL FEATURE". Pffftt!!! I had this "SPECIAL FEATURE" over 35 years ago on 2 of my hammers.
LMAO......cosign!!!
Yeah, this bloke is a real oxygen thief - he could talk underwater with a mouth full of marbles.
My great grandfather had a hammer with a nail setter in 1960!
Milled face is good for drywall as well. Great video
Thanks Vojnik!
No it's not god for drywall. A drywall hammer is waffled but it has a curved head so it leaves a dimple and not rip the paper and a hatchet end to shave of chalk that is excessive on the ends. I guess you didn't have to mud the job and have to fix all the holes you made in the sheetrock.
I used that feature once in five years.
Probably ten.I use nail guns.
I use a stepladder instead of reaching.
I've been using the same 20 oz estwing every day for nearly 30 years.
Very good tutorial. Never thought you can speak so much about hammers
Now I know somewhere else not to go for advice! As an apprentice of course I was teased, I was asked to go find an "ammerfore" of course I was supposed to ask "what's an ammerfore"? and the reply would have been "knocking nails in"! Fact is in a nutshell I am a master carpenter and joiner of over 55 years, and in that time , like everything else ,, be it fishing gear, shooting gear, tools for every trade, and today especially mobiles, pads, etc etc, the object of the game is to SELL SELL SELL, that is taking as much money from our pockets as possible!! And of course the "tackle tarts" like this guy , fall for it!
Learned no less than two awesome things in this video. Thanks as always!
Thanks 802 Garage we’re glad the video is helpful!!
Yo congrats on 40k subs bro! Incredible! I think I just congratulated you on 30k like last week. Lol! You're a beast cuz! 👊
Thanks David we appreciate you!!
Just bought that husky hammer in the 22 oz size based on this video - nice hammer !!
I always thought that was a sight like on a gun lol it always fails when u pull the trigger and smash ur self in the face loooool great video Vince my dad has that exact hammer but he paints everything green so no one can steal it
Good move painting the tools!!
i wondered what that nail shape recess with a magnet countersunk in it was for, another mystery solved
That nail setting feature is awesome.
I hear Pantera I hit the like button. Also Thanks for telling me what that was on the hammer I bought today. Hadn't bought a new hammer in 15 years.
Rare comment but we suggest you and others with the milled face on their framing hammers, should clean up and sharpen the face for more efficient use. The clean up improves strike and impact. Keep up the good work
Saw this same feature on Harbor Freight's 22 oz "California" framing hammer 5 years ago. Not really all that new but not a lot of people aware of it. My favorite hammer is a12 oz. Bluegrass that I use for trim work. Sadly the company is no longer in business as I understand but it is a damn fine hammer for light work. Well balanced with a nice hickory handle.
I have a california framer (vaughn) that I got in 1997 with a nail set and a waffle face, still works great :)
Same, it's been my favorite hammer for years.
Had my set of Estwings since 1967 ! Most framer use nailers today !
That is correct
Do they make another hammer besides estwing? 23yrs and never used another brand. Had a California framer by Craftsman with orange fiberglass shaft that was the only thing even close to the balance of a estwing but they stopped production of the Cali framer after only 2 years in 2002.
Never met an Estwing tool I didn't like, especially their hammers. I have my grandfathers, similar to the first one he held up in this video - unstoppable. Even the grip is still in great shape, and that thing got abused. Stay the hell away from Dead On though, their tools are cast, not forged. Yes, they snap - ask me how I know. :D
Also have Estwing cats paw, hatchet, camp axe.
Can you find some of the cheapest but best compact circular saws?
Sure
I saw nail holders on 1990 German brick hammers . Scutch on one end nail holder with waffle texture working in London in the 90s when all the brickies came back from rebuilding east Germany .
That is an awesome feature Vince. I have used that before, super useful! For $10 that husky is a deal! Great video guys
Vinny, Vinny, Vinny...…. Just a few points to make regarding your little 20 minute diatribe.... It doesn't take 10 minutes to explain waffles on a framing hammer. What you should have done is show all the different types of hammer and what they're used for and why. i.e ) sheetrock hammer has waffles and a rounded head to drive the nail in deep enough so it can be covered and not show through A flathead hammer will tear the paper if you try to recess the nail with a flat waffled head it will tear the paper if you sink it the right depth. The round head let's you drive the nail the right depth to make a golf ball sized circular dimple without breaking the paper. Then there's rubber and would mallets, single jack and double jack sledge hammers, roofing hammers, ball peen hammers, a slew of unique hammers for auto body repair, tacking hammer etc. I like having the right hammer for the job. I Example: I used a framing hammer with waffled head to roof my first house. Asphalt shingles and 1" flathead nails. They were small enough that I kept clipping the edge of my finger and the waffle head shredded my finger to a bloody mess. I probably have twenty hammers at least. Here are the most blatant mistakes you made 1. the feature on the other side of the hammer head is a "Claw", no at "Jaw" 2 .The waffle head is for rough carpentry, like framing and decking floors & roofs. It's meant to catch the nail better if you don't strike it perfectly square! Look at any 8 penny or16 penny nail and it has a waffled head that helps that as well. If you use it on galvanized nails it would do more damage to coating. 3. A framing hammer has a flat claw face and a finish hammer has a half round head because you have situations where your swing is limited and you permanently gauge finish wood, and it has a smooth face so you don't put a waffle mark on any expensive wood. I think the steel handle makes for a strong hammer but it sends a strong shock through the arm. I prefer wood or fiberglass. I built my first house with a 20' Vaugn and still have it today 45 yrs' later. But I used a nail gun for my second. 3. If you swing a hammer like you did when you trying to get the feel for a hammer you wouldn't last a week on the job, and probably need elbow surgery. You use your wrist, just like throwing a baseball. You get no power from you arms, it's from that last minute wrist action. 4. I believe that framing hammers are 16" long so you can find where a stud or joist is or where it's supposed to be. That framing hammer you use looks to be about 20 inches. Maybe it's 24" for 24" walls 6. you were showing how you pull out a nail by catching it with the claw and jerking it back towards your body. Besides jamming your wrist and arms . I was an apprentice for a master carpenter who showed me the right way. You hook the nail tight in the narrowest part of v shaped channel of the claw, but you rock it back and forth sideways keeping the head on the surface and it rocks it out easily even from a knot. If you pull nails like that with a wooden hammer it won't last long.. 7. The new feature to hold the nail has probably bee around for 50 years, and it's not meant to set nails when your framing. I can't even comprehend someone loading that thing for every nail he pounded. Think that would double you time framing a house. That feature is for starting a nail where you can't hold it with your other hand. Plus I don't think anyone using it all the time is gonna be an inch or two off most of the time. So you have a wall with nails that aren't exactly in the center of the stud 90 % of the. That makes for unacceptable structural integrity. I wouldn't live in that house. And why are you talking to us like we're retarded or something? I have serious doubts as to your integrity as a carpenter, or even more a Contractor. Be direct and to the point. Don't try drag it out with useless fluff to fill time. It makes you sound like you have no knowledge of the subject whatsoever.
I thought the milled face was to stop the head from slipping off the work.
It is.
I figured the milled head was for slippage when hitting nails.
Good video like always,I am not a carpenter by any stretch of the imagination but about a year and some change ago I decided to help other folks out here in the Island after hurricane Maria and like a couple of weeks before the storm I had gone and picked some tools at HD for a small demolition and one was a nice pry bar and the other was that Husky hammer you are showing here today glad I bought them,that is one very decent hammer for the money,it helped me a lot after the storm.
Estwing Ultra series also have the nail setting mechanism as well as the side nail pulling V notch.
I use a 23oz vaughan framing hamer with a wood handle that thing is a beast! (it is a waffled hammer)
Sweet Joey!!
Another uncommon feature I've seen... I have a Craftsman hammer that's probably 20 years old, or more. Unfortunately, I can't find it right now, I think someone borrowed it and didn't return it.
Anyways, I think it's 16-ounce or 18-ounce. It has an all wood handle, but it has a steel sleeve covering (protecting) the handle near the head of the hammer.
This is where the uncommon feature comes in. On one of the hammers claws, it has a tapered v-groove cut into the end (tip) of the claw. This can be used to pull nails when space is limited.
I've seen the magnetic nail starter feature on some hammers, but I don't own one of them.
Thanks for the feedback Kevin !!
This guy should be on tv.
Thanks Mark!!
Answer at 7:15
I did know this ,I have one and got it because of that,it can be handy when you have only use of one hand.
Awesome!!
A nail gun would help.
u r the man sir.....really know how to waste ppl's time
In my late father in law is an old hammer with a small spring loaded steel ball and a grove cut into the top of the head to hold a nail is you can set the nail one handed. this hammer is over 80 years old at least and is functional. Who knew? Very good video. Thanks.
Love my old estwing 22oz hammer mill face that’s my go to but my recent purchase was the Hart 21 oz mill face and that’s been nice addition.Vince what’s your thoughts on wood handle hammers? Great vid I could talk about hammer for hours
When i was starting out i worked with a old Italian mason.(he was probably 45 yo) and he would erect all his scaffolding out off wood.this was when i first and only time iv seen this done.if he had to nail something at a distance he would place the common nail between his index finger and middle finger right about at the first joint.grasp the head of the hammer over the top head pressing the nailhead against the side of the hammer head.and hold onto something with his left hand stretch out and slam the nail into the board starting the nail using the weight of the head.then he'd throw the hammer up gripping the handle and drive it home.he was very good.and taught me alot of old timer technics.but he was grumpy as hell in the morning.joe marchetti was his name.from philly.good show.thumbs ☝
Old timers got it done, but weren’t always pleasant to work with!! 🤣🤣
have hade same experience with old people at the work the knew alot of nice things and one was like a sopange soaking it up but they where grumpy like hell but after the first coffee and smokebreak they where back to normal laughing and telling dirty jokes ^^
I didn't know that, thank you!
I’m no carpenter , but my default hammer is a 6oz Crosspien , with a sawn off handle , I pull nails with pincers , anything I cant pull I cut off , and set , I also have a couple Ti Stilletto prybars .
Wow awesome!
I had heard that the milled face also was to keep the hammer from slipping off the head of the nail...
Thats what its for lol idk what the hell he is even talking about. Im starting to think he isnt very experienced in the trades
wuz about to treat me a new hamma since my grip was old but covered it with gripped shrink wrap instead.
Yo Vince what do you think about the stiletto and the Martinez hammers
I think they’re really nice!!