HI ,I can't link MTP400 to S7-1212 ,The screen shows a triangle mark on the I/O field. ,I tried to KPT400 and it can communicate normally. you have vdo for show how to link MTP400 with s7-1200 plc
@@TanapongPonghanat hi. One of the main reasosn that the communication doesn't work is the date and time in PLC and HMI are not properly set. Please double check the time on both sides.
Hi , thanks for your very useful video. I couldn't find the Unified basic panel PDF that you are showing, I only found the comfort version. Where can I find it?
Hi Gino. I asked the local Siemens sales rep to send me. Just find a local sales rep and ask for it. You can try opening a support ticket on online support website to see if they have it.
@@eduardobrisolla1185 there are a few factors that can cause this issue. First, make sure you have an HMI connection defined between your PLC and HMI. Then make sire the time zone is the same for both devices. Finally, make sure the CPU security allows access to all devices and the certificate is valid.
Agreed. 4" is too small and should be avoided if there are several object on the screen as it gets cluttered quickly. But it has its own use case for some projects.
HI ,I can't link MTP400 to S7-1212 ,The screen shows a triangle mark on the I/O field. ,I tried to KPT400 and it can communicate normally. you have vdo for show how to link MTP400 with s7-1200 plc
@@TanapongPonghanat hi. One of the main reasosn that the communication doesn't work is the date and time in PLC and HMI are not properly set. Please double check the time on both sides.
@blociot Thank you. After I setting the time for both PLC and HMI, now it works.
Hi , thanks for your very useful video. I couldn't find the Unified basic panel PDF that you are showing, I only found the comfort version. Where can I find it?
Hi Gino. I asked the local Siemens sales rep to send me. Just find a local sales rep and ask for it. You can try opening a support ticket on online support website to see if they have it.
Hi friend, do u know why I can´t find my MTP400 in the TIA v17 hardware list? that folder not even exists 😢
Hi Eduardo. If you have a MTP400 BASIC, it is only available in TIA V19. Unified basic panels are very new and introduced with TIA Portal V19.
@@blociot very helpful. Now I can't stablish a communication between PLC s7 1200 and my HMI MTP400. There's some detail that I'm missing?
@@eduardobrisolla1185 there are a few factors that can cause this issue. First, make sure you have an HMI connection defined between your PLC and HMI. Then make sire the time zone is the same for both devices. Finally, make sure the CPU security allows access to all devices and the certificate is valid.
I advice not to use the 4" MTP400 it is tiny and it is very uncomfotable to type on onscreen keyboard. Go at least for the 7" one.
Agreed. 4" is too small and should be avoided if there are several object on the screen as it gets cluttered quickly. But it has its own use case for some projects.
7110 Grant Passage
Armstrong Flat