Hello, thanks for sharing the mapping. I can't seem to download it correctly. Is it possible to send it to me live in the same configuration but with traktor 3.9?
Hello guys, at first BIG thanks for such a big amount of views and comments, really didn't expect it... This video was published on my old channel, where I have no access anymore (or some limited), so I always come here and try to find TSI mapping file requests or reply to questions, but maybe I missed something... If so, just let me know and maybe I could upload that TSI to another place finally :) And also I will make another interesting video with some new nice toys soon :)) THANKS again, cheers!
With this setting you are using the internal sound card for the pre-listen ?? My setting is too heavy now i would like to be enable to arrive with just one or 2 K2 and my laptop. Cheers,
for using the 2k with a xone 92 mixer (3 decks mixing) - u need two of the 2k since there are only one cinch and one jack to connect to a mixer, right? (with one 2k u can only connect 2 decks in tractor right?
Maybe it's easy but I have to ask something I'm not able to do. How can you see on your laptop screen the four decks plus the FX section. And how do you record your sets? Do you record them only with your laptop and the K2s? Please, answer me, because I'm thinking about buying two K2 and I'm plenty of doubts. Thank you
Hello, sorry for my late answer. You can change your layout in Traktor preferences. You simply set how should decks look like and their size to fit everything on screen. I'm recording music using Traktor internal recorder. It's the easiest solution in my opinion :)
hello friend, I have 1 xone k1 and xone k2 I have both linked. but it happens to me that the mapping that I have at the moment is not very functional. disapproving part of the controller with functions that could be useful. can you help me with this mapping. From already thank you very much. Cheers.
How do you map two k2s with traktor? I just can map one. The other one doesn't do anything it's even in another midi channel. Also, why I can't get any sound through the k2's soundcard in traktor pro 2 but I am able to get sound when I'm running traktor 1. Help me please!
thx so much, but in options of button i only can put hold, this works fine but in leds options just turns green when i pulse and when i put down leds swich off... in the video u press de encoder and have it green until put down again... how i can do it?
You must "Add out..." in you controller manager and select "Loop Active On"... It creates new row, where you select Type of Controller: LED, Interaction Mode: Output and assign deck and note according to the K2 user guide... In my case it's Channel 15, notes E9, F9, F#9, G9 (from left to right). Hope it helps.
It should, only one difference is built-in soundcard in K2. But I'm not sure about compatibility with latest version of Traktor. I will test it in few weeks and release update if necessary. But definitely try it ;)
I there any step by step video of how to map 2 K2'2 , I already mapped my first one and very happy with my TSi, however I don't know how to do it for 2 of them, I already have the idea of how is going to be but just want to go ahead, Im happy to share my TSi en I finish if anyone can help! cheers ! and good musik for everyone !
Hello, sorry for my late reply, you probably don't need to know the answer :)) You must just set different MIDI channel on both XONE:K2 (e.g. 14 and 15) and these numbers are used in your MIDI notes during mapping (Ch14... or Ch15...). Both K2 have to be connected together with ethernet cable.
+Tomas Drex I know this is an old video but I have a question. I'm using this with traktor 2.6.8 and it's sort of working but the k2 is layering everything so I can only use red coloured buttons on the red layer and green on the green, so I have to switch back and forth. Is this because of the version of traktor I'm using?
awesome setup, I did change the eq mapping too xone 92 4 band eq. but this was a great starting. thnx a lot!!!
mapping looks great! Just one question, how can you adjust the tempo of the decks and the master?
cool tutorial, thanks. I was almost to buy it and now I am more convinced. For now on, , when I feel tired; I can mix from my bed...lol :)
Hello, thanks for sharing the mapping. I can't seem to download it correctly. Is it possible to send it to me live in the same configuration but with traktor 3.9?
Hey man ! Can you please explain to me the process to put you mapping on?
so with the right mapping you dont need a mixer, two k2's is enough?
A single K2 can be used in stead of a mixer since it has a built-in soundcard and Traktor has internal mixing
Thanks!
Hello guys, at first BIG thanks for such a big amount of views and comments, really didn't expect it... This video was published on my old channel, where I have no access anymore (or some limited), so I always come here and try to find TSI mapping file requests or reply to questions, but maybe I missed something... If so, just let me know and maybe I could upload that TSI to another place finally :) And also I will make another interesting video with some new nice toys soon :)) THANKS again, cheers!
Tomas Drex fantastic mix! You made it look so easy
Love your Mapping, brilliant and simple setup!
Wauw! This really looks easy!
Hi Thomas, thanks very much, think i found you on SC as well:) Stay cool!
I would absolutely love the K2 if you could somehow activate or deactivate a mid position feedback on the knobs
i love this man! i'm gonna order 2 of these tomorrow!
Can you please share the tsi file for this mapping?
With this setting you are using the internal sound card for the pre-listen ??
My setting is too heavy now i would like to be enable to arrive with just one or 2 K2 and my laptop.
Cheers,
for using the 2k with a xone 92 mixer (3 decks mixing) - u need two of the 2k since there are only one cinch and one jack to connect to a mixer, right? (with one 2k u can only connect 2 decks in tractor right?
Maybe it's easy but I have to ask something I'm not able to do. How can you see on your laptop screen the four decks plus the FX section. And how do you record your sets? Do you record them only with your laptop and the K2s? Please, answer me, because I'm thinking about buying two K2 and I'm plenty of doubts. Thank you
Hello, sorry for my late answer. You can change your layout in Traktor preferences. You simply set how should decks look like and their size to fit everything on screen. I'm recording music using Traktor internal recorder. It's the easiest solution in my opinion :)
Hello Tomas,do you can help me to map xone k2 on traktor_I downloaded one psi but i don"t know to go...the less should start automatically_
Nice! Do you think the sound card is better than the one in the Z1?
i don't think quality is high in xone. haven't tested z1, so can't compare.
hello friend, I have 1 xone k1 and xone k2 I have both linked. but it happens to me that the mapping that I have at the moment is not very functional. disapproving part of the controller with functions that could be useful. can you help me with this mapping.
From already thank you very much.
Cheers.
How do you map two k2s with traktor? I just can map one. The other one doesn't do anything it's even in another midi channel. Also, why I can't get any sound through the k2's soundcard in traktor pro 2 but I am able to get sound when I'm running traktor 1. Help me please!
Could you still use the DB2's effects instead of traktors? Or would I need an audio interface for that?
Hi! Can I use a K2 with a k1?
Hi, you should have no problem. Only one difference between K1 and K2 is soundcard, but mapping functions are the same.
Hola, donde puedo encontrar este mapeo para Mac, gracias.
Do you have Windows or Mac Os?? (El Capitan?) i have a macbook with operating system El Capitan but the leds or not working???
hello, help me please, I want to change the colors of the pads, and I can not, not how to put the codes to make
Good setup.
Cheers!
Still works for traktor 3?
So u need 1 USB cable that splits to 2 connections for the K2's? Or how do u connect the K2's?
via network cable
Здравствуйте. Где
Скачать майнинг?
Hello friend! How you make that you can see the soundwaves on the pads?
Hello, check this video, there's everything you need to know :) .../watch?v=RBiQlO7svVk
Thanks friend :-)
hi men can u tell me what commandos uses for loops?; whats the name in traktor in add in, that u use for ur mapping loops?
thank u so much
Hello, "Loop Size Selector" for Encoder (mode: Relative)... And "Loop Set" when you push this encoder (button behaviour, mode: Trigger).
thx so much, but in options of button i only can put hold, this works fine but in leds options just turns green when i pulse and when i put down leds swich off... in the video u press de encoder and have it green until put down again... how i can do it?
You must "Add out..." in you controller manager and select "Loop Active On"... It creates new row, where you select Type of Controller: LED, Interaction Mode: Output and assign deck and note according to the K2 user guide... In my case it's Channel 15, notes E9, F9, F#9, G9 (from left to right). Hope it helps.
Thanks, found my problem in comments :)
thanks for this video!
No problem man! :)
ciao mi potresti dire che effetti di traktor usi'''?'''
does not want to work, as in the video, duplicated, how to properly configure?
How do you map different colors??
has the map got PreFader?
Alberto Morales pre fader is an option in the Traktor software.
Great Video thanks!!
tulip records nice tune
thanks for the video
Esta muy bien, pero le falla el load en A y C, ya que esta puesto en ele mismo botón que el cambio de capa, pero por lo demás muy bien.
Will this work with k1 s thks
It should, only one difference is built-in soundcard in K2. But I'm not sure about compatibility with latest version of Traktor. I will test it in few weeks and release update if necessary. But definitely try it ;)
I there any step by step video of how to map 2 K2'2 , I already mapped my first one and very happy with my TSi, however I don't know how to do it for 2 of them, I already have the idea of how is going to be but just want to go ahead, Im happy to share my TSi en I finish if anyone can help! cheers ! and good musik for everyone !
Hello, sorry for my late reply, you probably don't need to know the answer :)) You must just set different MIDI channel on both XONE:K2 (e.g. 14 and 15) and these numbers are used in your MIDI notes during mapping (Ch14... or Ch15...). Both K2 have to be connected together with ethernet cable.
+Tomas Drex I know this is an old video but I have a question. I'm using this with traktor 2.6.8 and it's sort of working but the k2 is layering everything so I can only use red coloured buttons on the red layer and green on the green, so I have to switch back and forth. Is this because of the version of traktor I'm using?
+Fug Nicka Hi, this mapping is not supporting K2 layers ability - I just mapped few most used functions without need to changing layers.
L'intro ressemble à celle de Speedy j et Chris Liebing pour la video de native instruments.
Got it! :)
Anyone has tested this mapping on traktor 2.11 ? Thx
👍👍
Thanks!
good music
Nice
found it on soundcoud
Please send me this midi
niceeee
RAD!
:)
Terrible mix
Shit as fuxk 😂😂
:)