Unleash the Power of AdguardHome: Crush Ads on MikroTik!
Вставка
- Опубліковано 28 чер 2024
- In this video, I'm going to show you how to destroy ads with Adguard on MikroTik! Adguard is a free and effective ad blocker that you can install on your Mikrotik router.
By destroying ads with Adguard, you'll be able to improve your online privacy and protect your bandwidth. This video is a great way to learn about Adguard and how to use it to protect your router from unwanted ads!
👊Thanks for taking time to watch my video. If you could, pressing LIKE and SUBSCRIBING helps with UA-cam's algorithm so that more people can discover my videos. Feel free to leave a comment for any other topics you would like to see me cover or what your general opinion is of the video.
🕘Timestamps🕘
📕00:00 - Introduction
📕00:40 - Docker Requirements
📕01:56 - Configure Virtual Network
📕04:07 - Configure Container
📕09:13 - Configure Adguard
Support the Channel:
⭐Become a Patreon: / thenetworkberg
⭐Become a UA-cam Member: / @thenetworkberg
Social Media:
🌏 / thenetworkberg
🌏 / bergnetwork
🌏 / the-network-berg-39451...
MTCRE Playlist:
• Free MTCRE RoSv6
MTCNA Playlist:
• Free MTCNA RoSv6
Thanks again for watching
![[How To] Set up AdGuard Home on OPNsense](http://i.ytimg.com/vi/7RC7q5WOYC0/mqdefault.jpg)
“Block adverts on your fridge” 🤣🤣🤣
I am done! 😂 - even though I know this is real due to IoT, it still gets me every time!!
Thanks Network Berg for all your amazing content!! 🥳🙏🏻
thanks! ive been running mine for a week and its been very good
How funny, you read my mind. I was just rolling that out a few days ago on Docker and trying it instead of PiHole, didnt notice this video then.
Keep up the good work 😎
Mikrotik bringing Docker to the routers put this machines in another level, remaining to see how the CPUs can handle recourses with the extra work flow.
Agreed! Have a HAP AC 2 & AC 3 but recently got a AX3. Still setting it up, but basically I'll (try) run Pi.Alert & AdGuard + the rest of config (VPN, vLAN, wireless station, AP, Guest AP etc)
Amazing tutorial. Simple and to the point. Thanks
Another awesome Video
I installed it on OPNsense and benchmarked it - integrated Unbound was significantly faster but it’s nice to know that you can do that on Mikrotik anyway, I’ve got my hands on one literally yesterday and randomly stumbled on this gold.
Good video sir ! I want to try putting my AdBlock in the cloud in Linode possibly and then using it for mobile phones and stuff !!
Thanks!
Thank you for watching, and I appreciate the support Kyle!
good video，respect from China，hope do a new video which shows how to set up openwrt in container 👍🏻
llevo tiempo siguiendo tus videos y e aprendido mucho , t doy gracias x el gran trabajo q haces , se aprecia mucho d verdad, como pregunta quisiera saber si esto lo puedo implementar en un CHR. saludos
@The Network Berg I have AdGuard Home running on a docker on my NAS with all clients on the network behind it (including the router).
I'm rather amazed that my router IP gateway iteself is getting hit with lots of ads being blocked/processed.
I wonder if these items aren't even making it to the end destination client on the DHCP, and that is why the router IP gateway address is showing much of the time versus the actual client on the network that's generating it.
Note: You can either statically set the Adguard IP as your DNS server manually or have your DHCP server advertise the IP to DHCP-Clients whenever they connect (It is all mentioned with the initial setup of Adguard)
Here is some reference material and MikroTik's 3 part docker series pinned here!
Container Docs:
help.mikrotik.com/docs/display/ROS/Container
MikroTik Container part 1:
ua-cam.com/video/8u1PVouAGnk/v-deo.html
MikroTik Container part 2:
ua-cam.com/video/UMcJs4oyHDk/v-deo.html
MikroTik Container part 3:
ua-cam.com/video/i9GcFEx_Ois/v-deo.html
Hey @The Network Berg, do you have a discord channel to be in touch with? I have a question about getting CCIE/CCNP or going with VyOS or Mikrotik Specialities?
Nice. Actually had installed adguard home on my edgerouter, cuz u know, edgeos is more like fork of vyos. Pretty nice, but vyos updates system image with every system update and u'll need to recover old server or install all anew.
Thanks, that useful!
A video of OpenVPN client (connecting to external server) working from Mikrotik docker would be really cool (I've tried, but failed..).
Wonderfull
Can you do another one of this guides but with a raspberry pi running adguard home ! :)
Since RouterOS ver7.8, because of the changes made in the USB management, instead of disk1, I recommend using usb1-part1.
Hi. Fan of your videos. Can you please create a video to setup a TR069 server and Mikrotik with TR069 package installed so that a configuration is downloaded from the TR069 server? Also any command to disable reset and netinstall? Thanks in advance
I would wait at least till version 7.7 Reason being is I mentioned the datamodel being used was outdated back till 2016 and they updated in latest beta. Would just wait till its in the stable branch
Great
If I understand correctly, you could use a Portainer Edge Agent on the Mikrotik and then monitor and manage the Mikrotik's containers via docker running on your pc / server etc
I have tried that (RouterOS 7.7) and the Portainer Agent never finishes extracting.
"Because you're a little bit strict" bwahaha DEF most South African parents :P :P :P
Adding some information on the DHCP config to allow clients to use this Adguard Container would be useful for many people.
Thanks for mentioning that, I will put it in the pinned comment as well.
How?
@@gudang0garam IP -> DHCP Server -> Networks tab -> Double-click your LAN network -> DNS Servers (set to 10.0.0.2) -> OK.
Then (if using Windows) open a CMD prmpt and "ipconfig /release" then "ipconfig /renew" to refresh your DHCP lease with the updated DNS address, pointing to AdguardHome's DNS resolver. Use "ipconfig /all" to confirm that it's been updated as expected.
Oh, and also (on Windows) do an "ipconfig /flushdns" to get rid of any Windows-cached resolved addresses so that your next DNS queries are sure to flow to AdguardHome's DNS for resolution (and perhaps blocking).
Can you bind the docker interface to an existing bridge that is using hw offloading and intervlan routing, or is it safe to make a separate docker bridge?
Thanks for the video, but i would suggest to clarify the Settings=>Encryption settings. Is not safe to let mgmt of the adguard on http. I have two question.
1. After the adguard is running, can we see how much RAM memory it is consuming?
2. By end of the video, you simply disabled adguard. But the client's dns still point to adguard IP right?. Does this brings problems to those clients with disabled adguard? Shall we let them still using the IP of "disabled adguard", or bring them back to another IP for the DNS?
Hi. Very interesting. What Mikrotik model you have? There are several types and I would like to know, what is minimal hardware for using containers.
I implemented this on an RB5009 tonight. It has a USB port that allowed me to connect an external HDD, so that I could use that drive for the container's I/O. I used to have an RB4011 -- which lacked a USB port, and I wasn't comfortable with having my container writing to the RB4011's internal NAND flash drive. I may be paranoid, but that's why I upgraded to the RB5009.
Hey TNB. Just writing that the latest tag of Adguard Home is working on RB5009UPr+S+ running RouterOS v7.10(stable) v0.107.36
AdGuard is definateli more fast as PiHole, and when I use PiHole on my MT hap ac3 was disaster, speed was reduced instead of increase.
What my tile router is not able to do containers. :-(. Could I use my rb450Gx4 to do this its behind my tile device? Is a usb thumb drive required.
is possible use traefik reverse proxy in container on mikrotik???? If so, could you make a tutorial?
to jest tylko dostępne na najnowszym sprzęcie co stoi na arm i po za tym trzeba rdzeni ramu i trochę przestrzeni na dysku
@21:25
little note here
if one uses HTTPS (DoH) or TLS (DoT tls://1.1.1.2 for example) your ISP does not see any DNS requests any longer (expect those used as "bootstrap DNS servers" - which are only used for DoH resolves to contact these DoH servers)
Now that I've implemented this (on an RB5009 with external USB drive) it's a big "meh". Sure, i's blocking a FEW ads (as shown by the AdguardHome's dashboard) but a great many/most still get through -- on the sites that I commonly visit anyway. I'd turned off my uBlock Origin blocker on my laptop for the testing of AdguardHome's blocking, but now I'll certainly be re-enabling uBlock Origin.
Yeah most video hosting sites like UA-cam or Twitch still mostly serve ads, you can try and add additional filter lists but the ads always slip through. An extension based adblocker on your browser definitely seems to work best, however, even these can get stopped by services like Twitch.
Hello The Network Berg, could you do a tutorial on how to upgrade the AdGuard Home container and if you can keep its initial configuration?
Thanks a lot.
Hi, plz advice how can i restrict extension vise downloading in Mikrotik 7.5 for https?
im new , ask if vlan will also filterd under interface
Nice, got it running and it works well just youtube ad's are still there is there a way to suppress them also?
Unfortunately video player ads still work through adguard/pihole in this instance. There are blacklists you can add to try and get around it but those lists keep getting updated. So for UA-cam specifically I would installing the Adguard app directly on your client as that is more effective at blocking player ads (Also still not 100% effective)
How to block ads in youtube app on samsung smart tv? Thank you.
Will this block ads on youtube using webos on lg tv?
utilzed wrkdir ad you indicated, but the data did not save and when I created a new container the data did not persist. Am I missing something?
By the way, Adguard is ruzzian software. Even it is open source, it's almost the same that installing Kaspersky or Dr.Web on your system
The people that made Adguard moved from Russia to Cypress in 2014, if there is a concern for you because the people who made it were from Russia then I could suggest using Pi-Hole.
I tryed many times without any success!
Can you update the tutorial on how to setup it with tar file?
I wish you talked about how to configure IP and DNS addresses in Winbox for those that are not running AdGuard on the router itself but rather have a home server. Was a bit bummed out that you didn't talk about it. :(
Starting to get out of the MikroTik lane. Better to use Opendns or get a UTM router.
Understandable, when it comes to UTMs I definitely think there are better alternatives. One should never get stuck into something if you can find something else that does it better.
I dont think docker containers are stable on ROS (*opinion). I used pihole before and it worked brilliantly until I updated to ROS 7.8. Then weird things start to happen. pihole does not run anymore. adguard still runs, but weirdness galore. When i set it up initially I could access the adguard ports from the LAN, then i rebooted the router and now I can not access anything from the LAN anymore when it runs in docker. Only the router can access the containers now. Can still ping veth IP but that is where it stops. Even tried port forward. nothing works. So strange
I think my HAP AC3 isnt capable of handling this cointainer. It keeps rebooting when I try to add many filters :(
Thank you for this excellent guide! On my RB5009 and ros 7.12.1, when I reboot the RB5009, the adguard container breaks. It doesn't serve any dns requests and the web interface cannot be accessed. Anyone else with this issue?
Hi, do you need to create a new veth for each docker container that i want to run? Or can i use an existing veth1 to a 2nd docker container i wanna run?
It is better to have separate VETH interfaces for multiple containers, however, you can use the same interface if you are only going to run one docker at a time. Otherwise you will have IP address conflicts.
Hallo! Habe einen RB951G-2HnD. Weiß jemand wie ich da das Container im linken Reiter installieren kann. Es ist nämlich nicht vorhanden.
Lg
You should probably change the title to "Adguard Home", Adguard is just the brand of the product and half the product name. Adguard has many other adblocking products, like AdGuard, which is an app/extension and not network wide.
Good point, title updated thank you🙏
i cannot reach the IP. i have use NAT rules but then everything shows up as 1 client (10.0.0.1) in adguard. am i missing something?
I can't download and run adguard, I get the following error: "error response getting manifests: 404"
I get the same error. i'll post if i figure out the solution
@@adamleblanc5832 I got it working using a build earlier than latest. Try; adguard/adguardhome:v0.108.0-b.25
This version works for me on the Hap ax3
excuse me, thank you for making a very helpful tutorial, but I have a problem, why can't I run Adguard? after I clicked start, the status changed to running and immediately changed to stopped.
Mr.berg where is better Pihole or Adguard
Up to preference both fill a similar role. So pick whichever you find easier to use.
i have a hAP ac2 (arm) running on ROS 7.8. Its giving me an error when i add adguard container. What could be the issue?
Hey Shephard, there is currently a bug with newer Adguard containers and pulling the image from RouterOS. This issue will be fixed in the next release. Current workarounds are to build the image yourself using Docker and then importing it as a file onto your MikroTik filesystem or to use an older tag to pull the image off the docker hub. If that sounds like a lot of effort then waiting for 7.9 should fix the issue. You can read more about it here on the MT forums:
forum.mikrotik.com/viewtopic.php?p=992636&sid=d52b11f43252be51cd4c186ce7e7906c#p992636
Thank you so much for the response.
Hi. If i set this thing up, does the root location of container have to be on local computer disk, or is it disk1 as in disk of mikrotik internal storage?
Internal storage of the mikrotik or an external drive connected to it with USB that you have in the correct format.
and how do i get the package for my mikrotik mipsbe to start using these containers?
It seems that my RB951G-2HnD mipsbe router doesn't support containers. Do you know if it maybe will, in future?
MIPSBE CPUs are not fast enough, and there are no Docker containers based on that CPU architecture anyway.
is it possible to have adguard on the same network as local network. i need to see the clients ip
Yes.
I wish there will be an active directory or azure ad solution by mikrotik.
That would be really awesome
@@TheNetworkBerg Indeed!
I'm using Sophos and I really hate it.
I really want to try this, but I'm not sure if my Mikrotik RB3011UIAS-RM RouterBOARD has enough memory (1 GB) since it has an arm cpu. How do we know what is the minimum spec of the Mikrotik router needed to support Adguard/Pi Hole.
I think 1GB is plenty, I was running this with multiple containers on my hAP ax3 which also only has 1GB of memory. I think the average usage for pihole/adguard ranged between 150MB - 200MB
It know it works because I have it almost setup. I can see everything is working right inside my router, i just need to figure out how to setup the last piece for the network where I can see local and login.
I got it working today. For some reason, the dstnat was tripping me up. Once I set that right it started working. My Mikrotik RB3011 cpu usage really never gets above 15%. So looking good.
After installing what are the settings to output the clients by Arguard?
I'm kinda against running containers on routers in general. Any security hole inside docker/program will exploit your mikrotik router.
Seems like it's not working anymore. On 6:48 I get an error "couldn't add container - not allowed by device-mode (6)". MikroTik hAP ac^2, v7.9.2
Yeah there is currently an issue with the firmware, MT is still working on a fix. Workaround is pulling an older TAG or creating your own container you can check out the pinned comment for more details
When I follow your guide it throws an error, just "error", when I hit apply. Couldn't find the answer on the mikrotik forum. Hoping for some good advice.
There is currently a problem using adguard with Mikrotik, to use it you will either have to download an older version of adguard by using a different tag, or import the image using docker on a linux host to create the image.
MikroTik has stated they should have this fixed by the next release (this was not an issue at the time of publishing the video and the steps will not change after MT fixes their issue)
You can read more about it here:
forum.mikrotik.com/viewtopic.php?p=994489&sid=ee91c437db444c07079d9174d12c6d27#p994489
Much appreciated that you reply. I've followed the path of installing a slightly older version. Works perfectly 😃
I am getting "error response getting manifests 404" after trying to add the container (6:47)
After reading other people having the issue- do you have any videos on how to build the image and importing it to the router?
The easiest thing to do is just to download an older tag like adguard/adguardhome:19842d22cbca
MikroTik will also fix this issue with their next patch so this issue doesn't occur anymore.
@@TheNetworkBerg Even trying with that one i get "error response getting manifests: 404" - Im not sure why that is though
@@TheNetworkBerg Made it work using adguard/adguardhome:v0.108.0-b.25
But I also had to "install" it on the ram using the ramdisk feature (which is a very interesting and nice feature tbh) so it will sadly all be lost after it loses power or gets restarted...
7:24 My question is, after the router lost power, my container won't run automatically? is there any way to solve it? Thank you!
Have you tried running the "start-on-boot" option with your container exactly as I did in the video? This should automatically start a container if a router loses power and boots again, alternatively you can create a scheduled script that can run on startup that starts your container.
@@TheNetworkBerg thank you very much. I haven't done that step yet. I will try and wait and see if the power goes out, it will automatically run. I'm a fan from Vietnam :)))
can addguard on mikrotik remove the adds on youtube on my android tv? or is pi hole will be better?
Neither are really great for removing ads from video streaming sites like UA-cam. An extension on your browser may work better
@@TheNetworkBerg Thanks for the info..
I thought it can kill all my adds specially on the youtube app itself
browser with extension to kill adds are hard to install on tv android.. or not even allowed
👍💐👍💐💐
I keep getting "unable to import container" error. I am using usb flashdrive formatted on ext4 with 2gb storage. I tried everything the exact way you showed
It is probably a permissions error, small update I have made to the pinned comment:
"Due to an update on docker hub this video currently does not work, it is still the "correct" method, although there is some parameters that dockerhub expects that MT doesn't give and now it does permission errors. MT is working on a Fix with their firmware to get it working by directly pulling the container. Until then please either create your own docker image on a Linux host preferably that you can copy to the MT and import that way. Alternatively you can still use an older TAG to download a version of the container that does work ie adguard/adguardhome:sha2139801ksalk120slq (this is just an example do not use this)"
@@TheNetworkBerg mikrotik released an update and this is working again
@@carloscarneiro9857 What version has the fix? I'm running 7.10 and getting the same error.
Why do I get the error in Logs? "temporary moving client veth1-adguard from slave to master port, update your config!!!"
No idea, has never happened to me. Log it with MT support?
Would this work on the hex S?
Nope. I have a hex s as well. it's a different architecture (mips). i was so excited for 5 minutes until I checked.
how does it compare to the pihole?
Adguard appears to use less resources, personally I like the UI a bit more as well.
@@TheNetworkBerg does it still need the unbound resolver for the secure dns request?
why am I seeing only the container VETH gateway in the top clients and not the clients IP?
Depends how you've configured the service, are your clients using the MikroTik as their DNS server and does the MikroTik use the container as its DNS server? If that's the case it makes complete sense (Also if you are natting traffic to the container as the MikroTik IP) I typically find you need to adjust container configurations a little to allow for remote lookups from other ranges then you will see your client IPs and not the MikroTik IP, as long as the clients use the container as the DNS server.
@@TheNetworkBerg what I did is giving the container an IP from the DHCP clients IP range and it showed me the clients but problem is, when I want another range of IPs to show up in the clients, I have to change the containers IP to their IP range, any ways of how to configure it to detects them? (I'm using rOS7.12)
how to nat to adguard
Docker is great but my RB4011 has no USB port :(
Same pain
Need help hahahaha I got no realtime stats on my dashboard it's empty, but I think Adguard is working I have no ads on literally any sites. But how?
where I can find containers menu? Its missing here 7.7 ver
Do you have the Containers package installed? It should be there if you have installed the Containers package.
@@TheNetworkBerg I donno , I didn't install anything.
@@TheNetworkBerg I guess I don't have it
I'm getting an error "Couldn't add Container - not allowed by device-mode (6)".
I'm installing on CHR.
You need to set the device into container mode, make sure you also have the container package installed. Please follow the MikroTik 3 part series to do this.
@@TheNetworkBerg Thanks for the reply. I have followed the 3 part series but fore some reason the "/system/device-mode/update container=yes" command don't enable my container. I have restarted the VM directly after the command. If I run "system/device-mode/print" the only output I get is "mode:enterprise".
Finally got the container enabled. I had to end task VmWare Workstation in windows after running "/system/device-mode/update container=yes".
@@stephan9294 You just need to power off your VM directly using "Right Click on VM >> Power >> Power Off" then start back again. you will see Containers=yes under device mode enterprise in /system device-mode/print
i am currently using Vmware Workstation in case you are using some other software then try to give it hard shutdown, thats all you need
Not for tilera revision !! wait for package ..... sigh ....
This will only work with Mikrotik devices having an ARM cpu or x86 cpu. No love for MMIPS like HEX router.
Yeah I mention that in the video that this is only on specific platforms, I can kinda understand the hardware limitations of some of the older hardware because I can see some people trying to run containers off of a Hex lite having 64Mb of ram and getting upset that containers do not work.
does adguard work for twitch? seems like they actually defeated every adblocker.
No, I still get served ads on Twitch. And yeah they are very effective at stopping adblockers. Amazon needs the ad revenue!
@@TheNetworkBerg they went to great lengths for this. now they nerf the live stream to 480p when they're sending you an ad based on your IP, no way to circumvent that other than having multiples of that stream running from multiple IPs and hoping they don't get served ads simultaneously.
works well for twitch because it's a live stream, but i'd imagine it'd be way harder for youtube to do something similar (twitch still serves no ads on VODs as well).
I ended up with Status: error for Tag: adguard/adguardhome:latest, its hap ac3, any idea? Thanks
Could be a few things, although it typically boils down to either not having enough space for the image to extract correctly or not being able to pull the image from the docker hub, if you aren't using external storage I would suggest adding that and using that to house your containers and as the tmp/dir for initial setup. For the downloading issue it could be that you might be using the incorrect URL on the container settings. Alternate suggestion would be to import the docker yourself from a local machine by either using option b) or c) on the MikroTik docs:
help.mikrotik.com/docs/display/ROS/Container
@@TheNetworkBerg Hey there! Thanks for fast reply first :) i resolved problem in meantime reformating usb thumb drive using ext4 this time. Works flawlessly! This is first container i deployed on MT and its pretty impressive how it works on this device. AdGuard works fine so far but i have to test it against PiHole that im using since its begining, what i can tell right now both are unable to block ads on youtube (official) app on android... But thats another story :)
Oh i forgot, thumbs up for your channel, its so usefull even for advanced users, learned alot new stuff from you, thanks! I noticed wifi on MT is not your niche, is it due to lack of hardware or you are not interested in that part ?
@@majormalfunction0xffff AWESOME, happy to see that you got this working! My very first video on containers with MikroTik was with Pi-hole and it does work really well (Unfortunately yes, neither Adblocker can really block ads effectively on UA-cam or Twitch)
@@majormalfunction0xffff Thanks, I appreciate that a lot. Uhm sort of, I tend to work more in the Network Engineer / ISP routing space and wireless isn't really my forte even though I have configured a few P2P links and such. If you are talking about Wifi in general like for home networks I think that Tksja another MikroTik channel already covers home solutions really well, although he isn't really active on UA-cam any longer.
I have thought about doing some home wifi setups/configurations as well, but... there just isn't any stock available for new hardware. The estimated time to get an RB5009 or hAP ax2 in my country is roughly 6 - 12 months, most placing the routers only available in 2023, so yeah I also don't really have the hardware to give real world scenarios.
can't ping my container what should i do next ?
Is the VETH bridged to your DOKCERS bridge where the gateway IP is? This is usually the issue. Else make sure you have the Container package installed and that the router mode is set to container.
@@TheNetworkBerg all is set correctly and the VETH is under a bridge, but still shows (I) for inactive under bridge interface
@@davidthetech1207 Export your config and hide sensitive information such as passwords/public IPs then upload that to pastebin and put a reply here so I can see your configuration.
512mb ram is enough to work ?
For small containers it should be fine I think Adguard probably uses around 128Mb so in theory it should be fine.
So, why AdGuard instead of PiHole?
Why pepperoni pizza instead of hawaiian pizza :D? It's really just the same thing and comes down to personal preference at the end of the day! Although Adblockers may becomes less effective especially on sites like UA-cam that is wanting to start to block it at an extension level. Similar to what news sites do.
does not work on youtube ADs
especially on smart TVs it does not work
neither pi-hole nor adGuard
Yeah the ads that load before a video starts or plays halfway through typically still gets through, it does stop stuff like bumper ads though
@@TheNetworkBerg unfortunately it does not even stops bumper ads for me ... only ublock origin is able to get rid of those on my PC but that does not apply for the tv, ps4 or the mobile phones :(
@@drumaddict89 you should subscribe to youtube premium !!!
It's really useless. Host blocking is just nothing compared to an extension like ublock origin.
The only really benefit I can think of is stopping Smart TV's connecting to their servers. I rather would use pfblocker.
Adguard or PiHole?
Personally I would lean a little bit more to Adguard due to it appearing to use a bit less resources as a container and having a very easy to use and understand GUI. Both are still great though and if you are using Pi-Hole it's totally fine too!
Great video, how would you go about making DNS queries encrypted ( for adguard )like the guy from Mikrotik does here? ua-cam.com/video/w4erB0VzyIE/v-deo.html. Only if I use cloudflare I seem to be getting DoH working but then my Adguard Home isnt in function. Secondly what are your thougths on Adguard Home vs. Pihole :) Im not using container on my MikroTik but its is running on my NAS having the MikroTik DNS point to the static IP of the NAS. Appreciate your feedback :)
great! you didn't told about NAT masquerade and DNS forward to veth and DHCP settings ( ua-cam.com/video/Wa8yi-7iH8w/v-deo.html
Adguard RUSSIAN product! ((
The image I pulled from hub.docker is not running, Always stopped。For example，alpine
Some containers just don't work with ros, not sure why but Alpine is one of them
hello, i have a big problem, when i add container, after extracting i'm getting error : failed to extract layer and was unable to import, container f6b4ce0f-9c58-4f1e-a3db-95111945398f , i have hap ac2, with 7,7 beta 8
Same issue. I think the VETH can see the internet.
Unfortunately, all DNS blockers still bypass some adds. In my understanding, because they cant filter HTTPS traffic. Browser extensions works better.
You'll more or less see this happen with embedded ads on UA-cam (Basically the ads that play as you watch videos) since the ad content is served from Google directly and blocking Google with URL filters tend to get tricky and can easily break other stuff. So for those types of ads and extension tends to work best.
I'm getting this error when trying to add the container - "Couldn't add Container - not allowed by device-mode (6)"
Sounds like you have not yet set the device mode as container compatible, you can do this by running this command in the CLI:
/system/device-mode/update container=yes
You will then have to restart the MT and it should boot up in container mode. You can verify if it is in container mode by doing a
/system/device-mode/print
It should say container mode there, if you struggle further please follow along with the MT documentations
help.mikrotik.com/docs/display/ROS/Container
Or reach out to MT support on their email address: support@mikrotik.com or their forums on forum.mikrotik.com