It takes hours for an upgrade, for some reason the upgrade process writes to the memory card at 600-800kb/s and a 2Gb upgrade should at that speed take about 40-45min. Removing the SD-card from the unit and trying to write to it directly from my computer via an SD-card reader in the same USB-port as the unit bumps the speed to 30-45Mb/s. You guys need to improve the upgrade tool since this feels like something out of the 90's.
I purchased an ICARSOFT i970 Diagnostic scanner it does not connect or read to my 2011Peugeot Boxer 2.2 HDI engine. I checked all connections and I updated the latest version still does not communicate with ECU.
Je suis dans la même situation que "COLIN CAMILLERI" , je viens d'acheter une CR Plus , impossible de faire la mise à jour . Mon icarsoft CR Plus est inutilisable . Que dois-je-faire avant de la jetter ?
Every time I try to download the update it stalls at 11%, or if I choose to download only the firmware it stalls at 16% and says: usb drive has been removed what is seemingly not. No answer from the support, I tried remove/reinstall the updater, use different usb slots, tested the usb ports on the computer, but still the same 16% stop. Any chance to download it to computer THAN installing it, something wrong with the app. Please advise.
I just got my new MBII tool. I'm trying to ensure it has the most current software version. But when I download the tool it comes up as an rar file? What is that? It won't open. The video shows it should be a zip file. It's not. What is the solution?
Take SD card out then put it inside the tool , then connect it to your vehicle again. If it still has same error code, please update it. Update software is available here www.icarsoft.com/Page/103.html
Hello, Thanks for answer, i have the serial number and the pasword but say " error pasword" , my iCarsoft it's for Mercedes/Smart and Sprinter. Best regards
It takes hours for an upgrade, for some reason the upgrade process writes to the memory card at 600-800kb/s and a 2Gb upgrade should at that speed take about 40-45min. Removing the SD-card from the unit and trying to write to it directly from my computer via an SD-card reader in the same USB-port as the unit bumps the speed to 30-45Mb/s.
You guys need to improve the upgrade tool since this feels like something out of the 90's.
I'm writing to support and I don't have an answer! PLEASE HELP! i have a BMM 2.0
video on how to download car models onto the software really help if we knew
Hello, please i need it register the serial, and your update he say “Communication to Server Failed” What is the problem?
I purchased an ICARSOFT i970 Diagnostic scanner it does not connect or read to my 2011Peugeot Boxer 2.2 HDI engine. I checked all connections and I updated the latest version still does not communicate with ECU.
Now that it's been 6 years since this video was posted, how does one update the MBII via a Mac?
hi dear please kindly note that this version MB II can not be updated via a Mac
www.icarsoft.com/Product/s-282-icarsoft_mb_ii.html
Je suis dans la même situation que "COLIN CAMILLERI" , je viens d'acheter une CR Plus , impossible de faire la mise à jour . Mon icarsoft CR Plus est inutilisable . Que dois-je-faire avant de la jetter ?
Every time I try to download the update it stalls at 11%, or if I choose to download only the firmware it stalls at 16% and says: usb drive has been removed what is seemingly not. No answer from the support, I tried remove/reinstall the updater, use different usb slots, tested the usb ports on the computer, but still the same 16% stop. Any chance to download it to computer THAN installing it, something wrong with the app. Please advise.
Same here
buy a new SD card. formate it in your PC tha do the update, it worked for me
make sure the right drive is selected. Mine defaulted to D: my reader was on E:
No sound? These guys need to get it together. Need a language course. Even the manual is whacky.
No sound on your installation video above. How can I fix that?
hi which laptop software system am i to use with respect to upgrading my iCarsoft vehicle scan reading tool V2.0 ?
Hi Tyrone, Please check herewww.icarsoft.com/Uploads/download/iCarsoft_MSDIAG_PCClientKits.zip
The updater says Download Failed, and wont work on any computer. The USB sd-card drive is recognized and works.
have the same problem any fix?
I just got my new MBII tool. I'm trying to ensure it has the most current software version. But when I download the tool it comes up as an rar file? What is that? It won't open. The video shows it should be a zip file. It's not. What is the solution?
Hi Tim, rar file is zip file. Please unzip it first.
Unzip tool is available here
www.7-zip.org/
i got the uploaded files,but Cr plus jammed System initialization.i cant read anythink,Does not off/ on. System is startin =Ok but then jammed
do u found a solution? my jammed too after the update
After purchasing the icarsoft MBii how do I know when there is a newer updated version? Also is updating the unit free from your website? Thanks
If the tool works great on your car, it is unnecessary to update. Yes, it is free.
I am having trouble with my icarsoft bmm 2.0v I connect it to the vehicle and it's a black screen telling error code: 00
Take SD card out then put it inside the tool , then connect it to your vehicle again.
If it still has same error code, please update it.
Update software is available here
www.icarsoft.com/Page/103.html
where i can find register code ??
Please connect the scanner to PC with USB cable,then turn on it and go to Help->tool information,then you can find the register code.,
hello , i have one icarsoft MB II new , but when i have the display with serial number , ask me the password !!! Thanks
Please Connect the tool via USB to your PC.
try to find the password under help->tool information
Then you can find the register code(Password).
Hello, Thanks for answer, i have the serial number and the pasword but say " error pasword" , my iCarsoft it's for Mercedes/Smart and Sprinter. Best regards
please send email to support@iCarsoft.us,they will help you with the udpate.
Smadoiu Florin you may be down loading the wrong upgrade for you toll
@@franklynordz4030 hallo, thanks for answers.
You need to register your domain. iCarsoft.us has expired.
i have this - iCarsoft MB II for Mercedes-Benz/Sprinter/Smart - but still same - " Password ERROR "
Hello Smadoiu, please confirm 2 things.
1. Did you download the right update software?
2. Register code is password.
Thanks i have help from you and all it's normal and works very good. @@androidautoapplecarplaycar4001