do you order directly from taobao? or use a agent ? I use chrome too and it translates everything but the page that comes up to put shipping info and payment in
Hey MTB! Just wanted to ask, where did you connect the system to the battery source? I see where you're supposed to solder it when using the stock battery tray. Where do you connect it to the battery terminal? Thanks!
Doesn't it die over time if you don't have that on/off switch? the microprocessor that controls the select fire will continue to draw power even if you are not using the blaster.
I don't suppose you guys would have a link to where I could purchase or to whomever made that buttstock endcap piece? Also to the other pieces? It all looks great and I would like to get my hands on it.
Nerf needs to make a pusher like that, it's way more practical than the rapidstrike one or perhaps even the hyperfire one. They did make a giant version in the mastodon...
So I have the kit and I am not sure where exactly do i connect the battery to the board and what type of wire I should use. May I have some advice on this? Also, on the website, it talks about a voltage rising modular. Can you guys please tell me what this is?
Did you see they have one where you cut out above the trigger and you add a select fire switch like the regulator which i have the regulator and it is better than i thought
Are the general mounting points for the kit the same if I put one into a modulus, or would I have to make new mounts. (besides the selector and such being in the battery tray)
The way we did it the burst fire kit is powered by the 2S LiPo that runs the flywheels. You can get it to be powered by the stock batteries if you wanted -R
hey, just started Nerfing, if thats what it's called Being on Gumtree grabbing a few other Nerf guns like 2x HyperElite 2x Demolishers a Rayven and a Modulus Can this Select fire kit be used on any of these or do just improvise, and when there more on the market?
From Very Long usage,like if you where using it in a war all day,would it like gain potential energy and eventualy melt the plastic becuase of the rate of fire?plz reply
I feel like Adrian will soon replace Ryan, and for some reason I don't have an issue with that. Can you have Adrian and Ryan do an episode purely on flywheel blasters. Like explaining the benefits of lipos, motors, wiring and switches?
So, gentlemen of MakeTestBattle, I have a few problems. I'm trying to make a Hellcat Rapidstrike with a Rhino Pusher (Trying to keep it from catching fire, so no HB 14 Darts Per Second), but I need to get some parts. I'm an American, with American money, and I need a Blastersmiths UK Switch Kit, which requires the lovely English Pound to purchase, and a Jodocast Rapidstrike 180 Motor Cover from Hobbymods, which sells in Australian Dollars. The question I have is where can I obtain some of these currencies so I can build this damn Rapidstrike? Or do the banks do the currency trade like the voices in the back of my head keep telling me? (I can get the Hellcats and the Rhino off ContainmentCrew, and they do it in US Dollars so I haven't had any problems with them. I've used the Honey Badgers in a Stryfe and they are quite wonderful.)
Make.Test.Battle Thank you. I've been planning this project for a while, but I had no idea how I was gonna get foreign currencies. I'll go look up some Exchange Rates and see if my bank charges extra for conversion.
I personally don't like the magic black box nature of it, but I do appreciate burst fire. I have two new mod guides plan for the next few videos. I also just got my new paintball tank and so I'm itching to get that set up but I need to buy a few blasters bits and parts first.
Make.Test.Battle ok I still want to make one can you give me the parts for the metal trigger, the motors and other stuff. is this a little much for my first voltage mod
jeffrey young Check our other videos for a mod guide and parts list on how to do the base super stryfe mod. The metal trigger can be found on the Artifact Taobao page here world.taobao.com/item/534934911420.htm
![[MOD] Tactical Nerf Rapidstrike Modification - Flat Top!](http://i.ytimg.com/vi/7aWTrQwBo3E/mqdefault.jpg)
![[MOD] Tactical Nerf Rapidstrike Modification - Flat Top!](/img/tr.png)
"We now resume to our regular programming."
Seriously, Go Sub to pSyk.
ua-cam.com/video/CJRVqugQ8C8/v-deo.html
-Justin
Do you guys also want a slect fire rapidstrike for ammo consumption
Thank you Justin. Much love!
This kit wont fit in the rapid red at all will it?
*****
I didn't think it would... now we need one for the rapid red.
Make.Test.Battle I need this
"Oh it's just another modded Nerf Uzi, nothing speHOLY FUCK IT SHOT THROUGH STYROFOAM"
yup that thing will hit harder than a damned airsoft gun
+myan ormisbutt maybe but not 100% sure it could thats still pretty fast for a nerd gun though
I shot it through steel. lol jk
Ugh, I wish I could do stuff like this, this is so cool, a single, burst and full auto stryfe
do you order directly from taobao? or use a agent ? I use chrome too and it translates everything but the page that comes up to put shipping info and payment in
When you get 2.1, can you guys make a comprehensive guide on it?
the blue jacket guys voice i swear, i dont know much about electronics but if this guy explained how to do it i probably could be able to
Hey MTB!
Just wanted to ask, where did you connect the system to the battery source? I see where you're supposed to solder it when using the stock battery tray. Where do you connect it to the battery terminal?
Thanks!
That is the new mini rapidstrike XD, but seriously that is awesome so keep up the good work
Doesn't it die over time if you don't have that on/off switch? the microprocessor that controls the select fire will continue to draw power even if you are not using the blaster.
what did you do to it cosmetically? it looks pretty badass
The grip on the stryfe, is from Taobao, a custom design, or else where?
DeltaWolf1000 taobao
Invicte Jsk Cheers. Hadn't seen that particular grip before
It's on eBay also I saw
Will this mod work in a normal stryfe? Also where did you get the grip for the stryfe?
Can u use streamlines in a stryfe, I mean will they jam or get torn up or what?
Awesome vid guys! Already got mine ordered. Out of curiosity what motors are Adrian running?
He likes to use MTB Honey Badgers on 2S for flywheels -R
Haha I jut caught the rick and Morty reference at the start. Love your work guys
I don't suppose you guys would have a link to where I could purchase or to whomever made that buttstock endcap piece? Also to the other pieces? It all looks great and I would like to get my hands on it.
8:59 what is that called, the thing that attach in the back of the stryfe? And where can buy it?
Yeah i know its a "Worker" part but i dont what its called so im still trying to search it :(
It is the titan stock made by jase 3d parts
It's on etsy
Nerf needs to make a pusher like that, it's way more practical than the rapidstrike one or perhaps even the hyperfire one. They did make a giant version in the mastodon...
That's kinda how the stampede works -R
Can you please show how to install it on a super stock Stryfe for dummies like me?
Nice video guys. While owning a full auto stryfe doesn't interest me I definitely see the appeal.
pew pew pew
+Make.Test.Battle can u send me link to the pistol 3d printed kit? cant find ut anywhere
+Make.Test.Battle. PewPewPewPewPewPew
+Make.Test.Battle. PewPewPewPewPewPew
Pew pew pew pew pew
So I have the kit and I am not sure where exactly do i connect the battery to the board and what type of wire I should use. May I have some advice on this? Also, on the website, it talks about a voltage rising modular. Can you guys please tell me what this is?
are you guys gonna do any other mod kit reviews?
Could you pease make a video on the kit Adrian has on his full auto stryfe as I am interested in purchasing one but can't find it
Where can I get that foregrip/mag well accessory piece in the thumbnail?
wow, I know a friend who lives in uk and the uk is not included int he official logistics, this means they will have buy it through an agent correct?
Love you guys!! Plus your generally nice people 👍💀
Thanks Strarch, you're a pretty chillaxed dude yourself. Hope the house move is going/gone well.
-Justin
As a fan of your channel, is there any way were you can setup some sort of schedule to upload videos ?
Not really. I could try a cattle prod on Justin or something... -R
xD
hey, do u hace any page to see the projects? u upload the guide for 3d printer ?
Where did he get that bottom rail and grip piece?
Did you see they have one where you cut out above the trigger and you add a select fire switch like the regulator which i have the regulator and it is better than i thought
What is the grip or the kit that is on the outside of the stryfe?
what are the other parts that are on the stryfe, like the mag guard?
Did he ever make an OJ one and if he did has he dual welded them
What is the esthetic kit on the stryfe in thumbnail ?!? I must know
Do you have a link to this kit? The link in the description is not working.
they need to make a kit like this for the rayven
Is there an English version of the instructions? Unfortunately the instructions are images and can't be translated :(
Damn, I was going to upload mine tomorrow!
Who makes that magwell grip? Link?
where did you guys get your lipo in this vid
Does the Desolator have enough space to run this?
will this kit fit a Demolisher 2 in 1?
Coop would love this
Is there any other website I could buy it on? I dont like how this one looks.
Where do you get that mag well grip
Where do you get that barrel and grip?
if the switch is there can you put on a stock
Will this work on a nerf rayven aswell
Are the general mounting points for the kit the same if I put one into a modulus, or would I have to make new mounts. (besides the selector and such being in the battery tray)
I'm pretty sure they are incompatible -R
Put it in a desolator?
myan ormisbutt the desolator would be an awesome full auto blaster
+Ben “Sheep” Lam I have the desolator and it's pretty good semi auto BUT it would be better if it was select fire but it's cool
+myan ormisbutt Modulus RS!
@@terminatorsoldaccount9639 Calm down
0:12, "shit we got tiny people"
I thought you were gonna make a video on the recon mk2 in the background
I will, don't worry. -R
You can upgrade motors with this kit right? And if so, would it handle a 3s with rhinos?
Euphorical yes
Nfstrike boomco darts 2020 start the trend on every nerf video
What's the aesthetic kit he's using?
Can this kit be used in a Rayven, or would that require a different mechanism due to the Rayven's bullpup nature?
It wouldn't fit in the rayven sadly :( -R
how much does this cost and does it work on other guns
I ordered a version 1 kit over 2 months ago. Still hasn't been shipped. I haven't worked out how to contact the seller yet : (
Put 0:03 on 0.5.
It sounds so damn satisfying.
still waiting for ryans shotgun
Ikr so many unfinished projects :C
but they r all so gud
guys before buying nerf on Amazon look up taobao because it much cheaper but Amazon got a lot more nerf gun on sell
can this work I the modulus or demolisher
No
i just checked taobao and it wont let me order one... is it just out of stock?
+Make.Test.Battle Hello do you think that this item would fit into a modulus without a lot of shell modification?
Thanks,
Ben
Doubtful -R
Ok thanks for the feedback
So, I have a question with this select fire mod. Do I have to change the battery set-up to run it or can I leave it stock, and drop this in?
The way we did it the burst fire kit is powered by the 2S LiPo that runs the flywheels. You can get it to be powered by the stock batteries if you wanted -R
Do you think you could Jerry rig this to work on a demolisher?
Probably not, and if so only with extreme difficulty -R
Will it work in a demolisher?
It'll probably work with the Demolisher, Modulus, and Destructor (or whatever the Doomlands reshell is called).
desolator
What's the kit on the outside? I need ont
Where can I buy that trigger and mag release?
You can buy it from taobao paste 下场神器 and you should find the mag release and trigger
+Some One thx
Reaper 180s?
hey, just started Nerfing, if thats what it's called
Being on Gumtree grabbing a few other Nerf guns like
2x HyperElite
2x Demolishers
a Rayven
and a Modulus
Can this Select fire kit be used on any of these or do just improvise, and when there more on the market?
After long term testing I would say don't get this kit.
The XSW kit is much better.
-Justin
Same website?
Yeah, search "XSW" -R
thanks heaps, you guys got me hooked lol
will this fit in a demolisher? also what stryfe cosmo kit is that?
No sadly. Adrian got that kit specially done -R
id would be cool if you add the mp5 sd kit to the uzi
Yeah; I do intend on adding a full auto kit to the MP5 blaster -R
Where can I get one of these?
does it work with a rayven
Is it worth it
Your opinion, will this also fit in a demolisher?
No -R
Is there a semi auto and full auto kit??? Its like this but no burst...
Slipstreamer Official its selct fire so you can choose
badass stryfeee
Could anyone give we the link of where I can purchase a metal artifact stryfe trigger?
can't find the kit to order
Is one of these kits going in the MP5 Stryfe?
A slightly different one, but yes :D -R
From Very Long usage,like if you where using it in a war all day,would it like gain potential energy and eventualy melt the plastic becuase of the rate of fire?plz reply
No, its fine -R
So either those are modded darts or that's some cheap styrofoam.
What forgrip is that?
If you buy a stock Stryfe, open it up and just throw this in without any mods, will it still work?
No quite, but it could. You need to solder on to the stock battery terminals. That said O haven't tried it so i don't 100% know for sure -R
Are those streamlines 😱
Hawkeye USA no
what grip is that
I feel like Adrian will soon replace Ryan, and for some reason I don't have an issue with that. Can you have Adrian and Ryan do an episode purely on flywheel blasters. Like explaining the benefits of lipos, motors, wiring and switches?
Ryan is irreplaceable, also me no smart
I'm still here; I've just been a bit behind the scenes recently -R
So, gentlemen of MakeTestBattle, I have a few problems. I'm trying to make a Hellcat Rapidstrike with a Rhino Pusher (Trying to keep it from catching fire, so no HB 14 Darts Per Second), but I need to get some parts. I'm an American, with American money, and I need a Blastersmiths UK Switch Kit, which requires the lovely English Pound to purchase, and a Jodocast Rapidstrike 180 Motor Cover from Hobbymods, which sells in Australian Dollars. The question I have is where can I obtain some of these currencies so I can build this damn Rapidstrike? Or do the banks do the currency trade like the voices in the back of my head keep telling me? (I can get the Hellcats and the Rhino off ContainmentCrew, and they do it in US Dollars so I haven't had any problems with them. I've used the Honey Badgers in a Stryfe and they are quite wonderful.)
The bank will automatically convert it, but you should make sure to understand the fees involved. PayPal is a good option -R
Make.Test.Battle
Thank you. I've been planning this project for a while, but I had no idea how I was gonna get foreign currencies. I'll go look up some Exchange Rates and see if my bank charges extra for conversion.
Almost 1 year ago and I'm still trying to figure out how to connect the unit to the LiPo instead of the stock battery tray.... Haha
does anyone have the link to the body kit for the stryfe he his using.
what does ryan think of this? does he like it or is he still with hpa? how is that going? Will there be more war footage? can wait to try this out
I personally don't like the magic black box nature of it, but I do appreciate burst fire. I have two new mod guides plan for the next few videos. I also just got my new paintball tank and so I'm itching to get that set up but I need to buy a few blasters bits and parts first.
Make.Test.Battle ok I still want to make one can you give me the parts for the metal trigger, the motors and other stuff. is this a little much for my first voltage mod
jeffrey young Check our other videos for a mod guide and parts list on how to do the base super stryfe mod. The metal trigger can be found on the Artifact Taobao page here
world.taobao.com/item/534934911420.htm
thanks what batteries and which motor do you use you said something about 4 imrs or a 2s lipo
I recommend MTB Rhino motors on a 3S LiPo or MTB Honeybadgers on a 2S LiPo -R
How did you translate Taobao ???
Google Translate in Google Chrome.
-Justin
found it thanks
Just educational enough should be your slogan.
It is.
-Justin
I think it is.
someone with a styrofoam shield: Come at me fuckers.
Make.Test.Battle: Alright, bitch. (I would assume you wouldn't say that tho)
some of workers stuff is on amazon :)
I'm kinda sad to be finding this now. It seems the kit isn't available any more.
The XSW is better.
-Justin
Where do you get one of those? And is it select fire?
Why are your stryfe internals gray? I know you are in a different country but is there a law about it being gray
Grey plastic and trigger usually means the blaster is weaker due to overseas laws.
Yeah, Australian (and a few other countries) toy laws dictate a lower muzzle energy so they make a special grey trigger version -R
would a 3s work ...pls answer..also can a 18p motor for the pusher be used
I meant 180
tejas singh a 3s would work, and you cannot replace the pusher motor
Invicte Jsk hi thanks man for replying !!