1. Will this work with IOT SIM like the one from Hologram? 2. Can this be installed on modern gravel bikes or are there any exceptions to this? 3. What is the battery life and will there be any replacements made available? 4. Is this waterproof? Also, is the usb port waterproof too or should I remove this unit prior to cleaning the bike? 5. Should the unit be installed with grease on the outer body?
1. Yes I cannot see any problem , hologram has a standard SIM card, but I dont know if supports CALLs ans SMS, if supports only data, PUSH nottifcations will work. 2. It suitable for any bike with headset steerer tube - inner diamater
@@jer-earth 1. According to the Hologram FAQs, they have mentioned data and SMS, but I think SMS has some caveats since it is an IoT SIM. Good to know that the notifications will work when there is network connection. 2. It would be nice if you could make a video on this particular installation on road/gravel bikes which do not have a hole at the bottom of the carbon fork. Also, there is no mention of "special compression plug" on the product page, hope this information is added there. 3. Great to know that the Battery has been designed with safety features, but are there any tests conducted to certify its safety? Just a little concerned here since we have seen some ebike batteries behaving like a silent bomb! 4. Good job on waterproofing the product. Hope the information of the "head flexible cover cup" is updated on the product page as I could not find any mentions of it anywhere, although it is shown in this video. I would recommend to include an additional "head flexible cover cup" as part of the package just incase we lose it or someone steals it. 5. Regarding the question, to elaborate, for installation of many components/bolts on the bike we normally apply a layer of grease on the body so that they can be easily removed when it needs to be, also for smooth operation and to prevent damage from friction. So, do we need to do the same on this device, i.e., apply grease on the body of the device or on the inside of the steerer tube prior to installing it there, or is it not required at all?
1. IoT card is supported by TrackHead, it supports DATA PUSH, SMS and CALL notification according to support SIM cards. 2. ua-cam.com/video/SCrnUTikr44/v-deo.html 3. Each battery is double isolated and has strenghtened insulation against moisture and every its security IC is tested for preventing (disconnection test) before Under Voltage Over Voltage, Short Cut, Over Current Load, Overcurrent Charging 4. every package has flexibile cup. documented innovation you can find in News section of trackhead.bike, end of document: trackhead.bike/media/news/2022/01/ 5. During installation is not needed to add any grase to steerer tube or other external components, but inner o-ring has been factory grased for better watterproof.
1. Will this work with IOT SIM like the one from Hologram?
2. Can this be installed on modern gravel bikes or are there any exceptions to this?
3. What is the battery life and will there be any replacements made available?
4. Is this waterproof? Also, is the usb port waterproof too or should I remove this unit prior to cleaning the bike?
5. Should the unit be installed with grease on the outer body?
1. Yes I cannot see any problem , hologram has a standard SIM card, but I dont know if supports CALLs ans SMS, if supports only data, PUSH nottifcations will work.
2. It suitable for any bike with headset steerer tube - inner diamater
@@jer-earth 1. According to the Hologram FAQs, they have mentioned data and SMS, but I think SMS has some caveats since it is an IoT SIM. Good to know that the notifications will work when there is network connection.
2. It would be nice if you could make a video on this particular installation on road/gravel bikes which do not have a hole at the bottom of the carbon fork. Also, there is no mention of "special compression plug" on the product page, hope this information is added there.
3. Great to know that the Battery has been designed with safety features, but are there any tests conducted to certify its safety? Just a little concerned here since we have seen some ebike batteries behaving like a silent bomb!
4. Good job on waterproofing the product. Hope the information of the "head flexible cover cup" is updated on the product page as I could not find any mentions of it anywhere, although it is shown in this video. I would recommend to include an additional "head flexible cover cup" as part of the package just incase we lose it or someone steals it.
5. Regarding the question, to elaborate, for installation of many components/bolts on the bike we normally apply a layer of grease on the body so that they can be easily removed when it needs to be, also for smooth operation and to prevent damage from friction. So, do we need to do the same on this device, i.e., apply grease on the body of the device or on the inside of the steerer tube prior to installing it there, or is it not required at all?
@@KaushikNSanji ua-cam.com/video/SCrnUTikr44/v-deo.html
1. IoT card is supported by TrackHead, it supports DATA PUSH, SMS and CALL notification according to support SIM cards.
2. ua-cam.com/video/SCrnUTikr44/v-deo.html
3. Each battery is double isolated and has strenghtened insulation against moisture and every its security IC is tested for preventing (disconnection test) before Under Voltage Over Voltage, Short Cut, Over Current Load, Overcurrent Charging
4. every package has flexibile cup. documented innovation you can find in News section of trackhead.bike, end of document: trackhead.bike/media/news/2022/01/
5. During installation is not needed to add any grase to steerer tube or other external components, but inner o-ring has been factory grased for better watterproof.
Too big.