Thanks to the fans who voted on our UA-cam community, we choose iPhone 12 Pro Max to teardown at first. What's inside iPhone 12 Pro Max? What if we compare the parts of iPhone 12 Pro Max to iPhone 12 Pro? Just follow us to check out!
This is probably one of the best tear down video I’ve seen so far, thanks for making this! Personally I think there are a few clips that are too short to read the text, great job nonetheless!
Video is great. I have one question bottom of iphone 12 pro max have two speaker holes , 6 holes have speaker what about other 4 holes ? Speaker is there or not ?
LOVE your videos and the comparison you make. But I think that you should change the carbon table so the pieces can be more appreciated due to contrast. Just a thought
Replace individual earspeaker wont' effect Face ID, but please make sure you use genuine sensor flex. You need desolder the sensor flex from old earspeaker and solder sensor flex to new earspeaker again.
Hi Latinos, it's our Ecooper 3D Screwdriver, check this video for detail: ua-cam.com/video/5hd2eoVjDmM/v-deo.html, and link as below: www.elekworld.com/Shop/productinfo.aspx?proid=12338&categoryid=542. Also you can email service@elekworld.com for 1 on 1 exclusive service.
Unless the phone was dropped/shaked frequently and last long period, otherwise I don't think they will get loose easily because of Apple's perfect install technology.
@@Elekworld your video is very helpful. Thank you!! . I think the internals would not loosen up. Seeing in your video that each component is screwed with metal plating and some are glued. The dropped happened to my pro max was a little bit above knee level. I have a tempered glass screen protector and also a tempered camera lens protector and a apple silicone case.
@@paulbonifacio901 Wow, that's a 360° angle protection. Don't worry, everything should be still in perfect condition. If you like our video, please sub our channel and stay tuned for more helpful update. :-)
Is the antenna that is used to receive and send 4G the same as the 5G one? It has only one antenna for all or does it have two one for each technology?
In my opinion it's two individual signal module, the traditional 4G signal antenna works when you haven't acvitivate 5G network. While after you activate 5G, only 5G module works.
Yes, always one loudspeaker, but when you play musics and videos, games, the earspeaker will also working, to make it sounds like 3D sounds around the screen. You can try and feel the sounds from earspeaker.
@@Elekworld ok, thank you for that. Kinda cool if you think about it. Anyhow, I’m not sure why there are so many 12 Pro Max haters out there not liking the size. It is the same size as an 8 plus with a Mophie Juice Pack. FYI
From the 12, 12 Pro swap test ua-cam.com/video/GGnZODPACq4/v-deo.html, we know that in iP12 series, Apple even locked the data on camereas. Probably the data wasn't encoded correctly on the camera.
Thanks to the fans who voted on our UA-cam community, we choose iPhone 12 Pro Max to teardown at first.
What's inside iPhone 12 Pro Max? What if we compare the parts of iPhone 12 Pro Max to iPhone 12 Pro? Just follow us to check out!
instaBlaster
This is probably one of the best tear down video I’ve seen so far, thanks for making this!
Personally I think there are a few clips that are too short to read the text, great job nonetheless!
Thx for advice so much, my friend. We always seek for balance between content and video rhythm. Will always try our best.
This is the bestest video I have seen ever
your videos are great ! keep up the good work !
Thanks man, we will keep up and share more video with you guys.
This is the 5th tear down of the 12 Pro Max I’ve watched and it’s the neatest and best in terms of tidy technical work and thoroughness. Thank you 🙏🏼
Thanks very much for your praise, we will keep working hard to share more helpful videos.
Have you noticed the quality of this video is much higher comparing to American counterparts. Well done and @ifixit should be learning from you 👏
Thanks so much for praise, we will keeping up!
Truly a marvel of engineering from our century
Way better video than any other channels More actions an no words. love the work.
Thanks for praise Sagar. Pls sub our channel for more helpful videos update in future. :-)
I need motherboard of 11 pro max how i cantact to you
Sorry bro we don't sell board, suggest you buy them locally.
You are the hero
Wow amazing video 📸😻📸😻📸
Video is great. I have one question bottom of iphone 12 pro max have two speaker holes , 6 holes have speaker what about other 4 holes ? Speaker is there or not ?
The other 4 holes is for bottom microphone, which is the main microphone. The other 2 microphones is near the earspeaker and the rear camera.
LOVE your videos and the comparison you make. But I think that you should change the carbon table so the pieces can be more appreciated due to contrast. Just a thought
Thanks a lot for suggestion, we will consider your advice.
Thinking how he will assemble this again😂😂😂😂
Easy work, just reverse everything 😃
@@Elekworld ya😂
Just awesome
Thanks Ravi, pls stay tuned with us for more interesting update.
My 12 pro max ear speaker is not wrking. If i replaced it, will the face id still work?
Replace individual earspeaker wont' effect Face ID, but please make sure you use genuine sensor flex. You need desolder the sensor flex from old earspeaker and solder sensor flex to new earspeaker again.
Where you buy the scree driver it look very fancy
Hi Latinos, it's our Ecooper 3D Screwdriver, check this video for detail: ua-cam.com/video/5hd2eoVjDmM/v-deo.html, and link as below: www.elekworld.com/Shop/productinfo.aspx?proid=12338&categoryid=542.
Also you can email service@elekworld.com for 1 on 1 exclusive service.
You are the first one I’m sure
Do you think those internal components would break or loosen up/shaken up when the phone is dropped? Thanks for the answer.
Unless the phone was dropped/shaked frequently and last long period, otherwise I don't think they will get loose easily because of Apple's perfect install technology.
@@Elekworld your video is very helpful. Thank you!! . I think the internals would not loosen up. Seeing in your video that each component is screwed with metal plating and some are glued. The dropped happened to my pro max was a little bit above knee level. I have a tempered glass screen protector and also a tempered camera lens protector and a apple silicone case.
@@paulbonifacio901 Wow, that's a 360° angle protection. Don't worry, everything should be still in perfect condition.
If you like our video, please sub our channel and stay tuned for more helpful update. :-)
@@Elekworld yes will surely subscribe to this channel 👍🏻
@@paulbonifacio901 Thanks very much!!!
Can you tell me price of all parts one by one ?
Hey Shahab, we have complete parts price lists of them, please email service@elekworld.com to get it.
Is the antenna that is used to receive and send 4G the same as the 5G one? It has only one antenna for all or does it have two one for each technology?
In my opinion it's two individual signal module, the traditional 4G signal antenna works when you haven't acvitivate 5G network. While after you activate 5G, only 5G module works.
@@Elekworld so it is possible to take off of the phone the 5G one and continue to be able to use 4G?
Better than iFixit.
Wow, that's a big honor to hear that, thanks so much for praise. We will keep working hard to share more helpful videos.
i like this video and music☺
what us music name?? ☺
Subway Dreams - Dan Henig
@@Elekworld Thank you so much🙏😊
@PorKim Goku welcome Porkim, if you like our video and channel, pls sub and stay tuned for more helpful update. 😊
@@Elekworld Yes
So there are not 2 speakers in the Pro Max, there is one in the bottom and it is designed for spatial that also sounds through the screen?
Yes, always one loudspeaker, but when you play musics and videos, games, the earspeaker will also working, to make it sounds like 3D sounds around the screen. You can try and feel the sounds from earspeaker.
@@Elekworld ok, thank you for that. Kinda cool if you think about it. Anyhow, I’m not sure why there are so many 12 Pro Max haters out there not liking the size. It is the same size as an 8 plus with a Mophie Juice Pack. FYI
@@COddietsch Yes it's very close with 7P/8P, but display size maximumized. I like it, anyway. :-)
Diffrent from US VERSION… LL aka US version has 5G ANTENNA ON THE RIGHT SIDE… … must take a battery first to take out the motherboard….
Yup, also the back housing different from China/EU version.
Did I miss the 5G module?
the 5G module on the side of the iPhone is only on the us model.
@@blipackermann5097 Yes, in China Version the 5G module is only a plastic piece instead.
Its weird how the main board is bigger on the iphone pro compared to the max interest what apple did
Maybe it's designed for bigger camera module and bigger battery capacity.
Motherboard buying
Hey guy, we dont' sell motherboard, bro.
and i paid $1400 for 512gb 12 pro max...i wonder how much is the manufacturing cost to make one of these..............
About US$500
Great
Wow
Can you give that phone for me? Please. Even if already taken all parts, I can Fix it again🙏
You are not only skilled but also humor nice person. 😏
@@Elekworld That's one of my dream phone but I can't afford to buy it
LOL, my iPhone 12 Pro Max goes back to Apple for repairs. I don't trust anybody else to work on it.
What happened? One of my friend's main camera not functioning too and had it sent back
From the 12, 12 Pro swap test ua-cam.com/video/GGnZODPACq4/v-deo.html, we know that in iP12 series, Apple even locked the data on camereas. Probably the data wasn't encoded correctly on the camera.
Chingon
Thanks bro.
The music just made this video unbearable.
5:32
12 pro max motherboard give me
Sorry we don't sell motherboard, bro. :-)