Factory Default Google Mesh Will Not Connect Wifi
Вставка
- Опубліковано 22 лип 2022
- If your Google mesh will not connect, you may need to factory default it of if you purchase a used one.
This will resolve a lot of IP issues orange light issues things like that.
Thanks for watching please click like and subscribe. - Навчання та стиль
Thank you thank thank you! Worked in IT for a long time and i find myself pretty capable of figuring stuff out but this crap drove me nuts. i consider myself a bit of a Google fanboy but the reset process is just plain stupid... it should not have been this difficult (and i shouldn't have started drinking before i attempted it lol) . i just wasn't waiting long enough when the orange/yellow light started and kept doing it over and over again until I found your video. Thanks again!
This is the BEST video out there for these mesh systems 👌🙏👏👏 I was about to brake mine because of how frustrated I was 😅
Thankful for this video. I have been working on fixing my mesh system for several hours and was very perplexed why I could not get it connected. The Reset Button was the key and waiting 10 minutes before attempting to connect. I can't say thank you enough because this content was not found in any of the other tutorials I had watched. Thank you!
Thank you so much for this! I was so incredibly frustrated trying to do a rest on these! Your tutorial solveed my problem and walked me through it seamlessly. Yay!
Thanks for this. I got a new faster modem and I have been trying to recreate my google mesh wifi setup which has a google nest router and two nest access points plus one google wifi access point. I was able to reset the nest equipment but apparently I did not wait long enough for the google wifi access point to reset and google home couldn’t find it. Thanks for posting.
You are a friggin GENIUS!! Thank you so much for doing this - you saved me $350 on a new mesh router system!!
best video ever. finally stopped my frustration after hours
Your tips did the trick! I’d been trying to get my wifi point connected for months. Thank you.
Glad it helped thank you for watching and dropping a comment.
Dang! That was an informative video! This Google cr@p really drove me nuts, and nowhere in the manual does it say to wait for 8+ minutes!!! Again, thx for the info! 👍
That wait is the hardest part... lol I have been doing home security and automation since 2005.... I have learned "30 seconds" could be 10 minutes depending on a lot of factors... Thanks for watching and dropping a comment. Please subscribe if you haven't already will help me out, I almost have enough subs to get monetized.
Only one that helped me get it reset no one tells you how thanks so much
No problem, thanks for watching, not sure why but waiting patiently is not in any instructions anywhere and if you don't wait that 8 minutes or so it will never reset.
@@safesoundsystemsinc2005 your right it’s not listed anywhere I reset mine and took about 5 mins or so and I was able to set up again thanks again
Thanks for the info! Solved my problem!
This tutorial is GOLD. Thanks!
Thank you for the info. Solved my issue
Duuuuuuude you're the best. Thanks for posting this
This is the best video out here, thank you for your help……
thank you so much. I was getting so frustated to resetting. really like you said take around 7-8 mins before blue pulsing again. finally found device
Glad it helped, yes that is all about patience. Many of the newer "Smart" devices are the same, I have no patience left some days. lol Thanks for watching, and dropping a comment.
the 10 minutes! thank you.
Hardest part of todays technology is hurry up and wait. lol
Thank you, it was very helpful!
Thank you so much! I was not waiting enough time
No problem, that is the most likely problem for everyone resetting those. 8 minutes is a long time while your staring at it... lol Thanks for watching and dropping a commen.t.
Saved my time, thanks
Thanks a lot for the info. It works
Just the help I needed
Glad it helped thank you for watching and dropping a comment.
This worked out for me as well, thank you
Glad to hear it thanks for dropping a comment.
Great help. Thank you
Glad it helped thank you for watching. If you haven't already please click on the subscribe button.
This saved me a lot of time. Thanks
Glad it helped, thanks for dropping a comment.
Hello. I just reset the three points and the lights are solid blue . Can you tell me what I have to do next? I don’t see how to access the Google wifi yet on my system
Man this was sooo helpful!
Glad it helped, thanks for dropping a comment.
Thank you so much 🙏 Checking wifi helped. I had four, one reset just as you said, two had reset but had very low lighting & the fourth worked on its second try 😊 Did you ever post the video on setting it up?
No, I actually install Amazon Eero systems for my customers, most seem to use Alexa and the Eero since owned by Amazon works better with them. I had just pulled that unit from a customers house, Ironically a year later still sitting on the shelf of the work van, "just incase" I have a customer with a bad one that just wants to replace or maybe add for more range. Usually it is pretty easy, you just need to make sure 1 is plugged into the main router of the house, and from there on should be as simple as following the app instructions, they have made it pretty user friendly.
@@safesoundsystemsinc2005 Thank you anyway🌝 I am stuck in Bolivia & don't have access to purchasing a different system. It used to work with Google WiFi App but when they migrated to Google Home it stopped working. I'll hopefully figure it out. Your re-set video was a great first step. Thank you🙏🏻
@@CIF369 Sorry can't help more and being in America the setup here may not even be the same there. There are different rules and regulations even for big companies like Google, could just be a Google issue in the country. Good luck..
Do you have to reset all 3 hubs? Also, did you end up doing the video on the setup for these, would be very helpful.
This does work thanks!
I know this video is like a year ago but hoping for some help as I try again to set up my Google Wifi it says connected after connected in google home it says that I need to connect the ethernet cable but I already connect it on the modem still says I need to connect the ethernet cable! It is frustrating to set up this not easy! Hoping for some enlightenment on how to solve this issue. Thanks
Having the same problem right now. Did u find a solution ?
Just had the same issue within the past 30 days. If you set up the new router in a different Google “Home” account, it will only recognize it as a new network and require an Ethernet cable. If you link to the “”Home” account that includes other existing Google WiFi devices, it does not require the Ethernet cable and should set it up as an additional nest router.
It took me about six hours to figure this out and set up the new nest router. As an FYI, the Google help desk was of NO a help.
Thanks bro
THANK YOU!
Glad it helped thank you for watching and dropping a comment.
Thank you 🙏🏾
Glad it helped thank you for watching and dropping a comment. If you haven't already please subscribe, trying to get to that 1000 mark.
I have 3 access Points. 1st point is connected to my home router. When I perform the factory reset, do I unplug the other 2 points or leave them plugged in?
I usually unplug them and reset them one by one. Do the main one first at your modem. Then plug one in at a time reset and connect. You probably don't "have" to unplug them, but I find it easier to just put them all in the same room, and connect 1 at a time then move them after they are set up to where they need to go. Thanks for watching and commenting.
@@safesoundsystemsinc2005 Do the other 2 Points have to be Factory Default Also?
@@safesoundsystemsinc2005 how do I connect one at a time? Do I need to plug the ethernet cable in each one at a time to be able to connect or setup them?
This video saved my life lol
Thanks for watching and dropping a comment glad it helped.
just a quick question, if I changed the modem, do I have to reset each one of them?
So sorry been traveling for the holiday. You don't have to reset them all but you will need to update the passwords. As long as you have access to your mobile app, you really only need to Reset if for some reason you forgot your password, just bought the system from someone and cannot access it or you are having major difficulties and need a clean slate. It doesn't hurt to reset them, but again should just be updating the password. If they are "Hardwired" you should not have to do anything besides unplug them and plug them back in. Thanks for commenting, again sorry for the slow response.
Thanks and appreciated your time
It pulses blue than goes solid and later again starts pulsing. I am trying to add 3rd point but it won’t detect
Mine just stays solid blue ???
I just tried to do the same and it’s over 20mins blue light is still blinking…is this normal…
yes, mine took 15 on one of them and 30 on another.
Mine stayed like that for the whole day
Mine does too, just a slow orange pulse all day
Cool ! Question: I'd like to reset the AP's network name and password to. match all my already set network and password. How do I do it ? Thx !
I use Eero 99% of the time for routers, the couple Google I have done from the app there should be a "Profile" or "Settings" page that you can change the user name and password. If you are just resetting it the first time you set it up it will ask you to enter a network name and password. Sorry cant help much more than that.
@@safesoundsystemsinc2005 Follow up: Problem solved. It turned out my LAN setting was turned OFF in my iPhone settings. Turned it ON, and problem solved ! Thank you !
So this didn’t work until I put the one node actually ON TOP of another node….then it connected.
Thank you
Where is the 8-digit setup key on these Model H2D Google routers?
Should be on the bottom, not where the QRC code is but on the outside edge. Try www.more.com.au/storage/modems/Google_Nest_v6.pdf for more help.
Question?
When you scan the code and it says no wifi found is that because I didn't wait the this video says ? My system went down and I wiped the history and unplugged the extenders. And still no connection. My system has the button on the bottom. And upto 2 days ago I have awesome internet and a great resting router. Need your help. Thanks
Troy
Most likely just didn't wait long enough after resetting. If you can get near your router you can run an ethernet line to it also to set it up, then just unplug and move it where you need it. But 8-12 minutes for that reset... Not sure why but it seems like an hour while waiting.
My device seems to just get stuck in a loop of turn on goto blue flashing light, blue solid light, blank, blue flashing light etc etc. I kept waiting for like 30 minutes to 2 hours and tried to factory reset multiple times. Its still stuck at blue
Same exact thing, started last night, done all the resets, they pulse blue but won’t connect.
@@raycon4475 so today I have a 45 minute discussion with google support. We tried everything. They emailed to sent a replacement unit but i don’t know if they have support in Middle East
Apparently someone who had such issue used galeforce method to root the device and then bring it back to life. Let’s see
@@DanishSiddiqui1984 I talked to support as well and got them back up by running Ethernet cable from primary to each puck and then running the setup.
@@raycon4475 I tired that already. Even after connecting it with lan cable the solid blue light is not going away. How did you start the setup?
@@DanishSiddiqui1984 I reset them by holding down reset button while puck is unplugged for 10 secs and then kept holding down button till pulsing blue. Then on phone under Wi-Fi I picked the puck and then did the set up process.
solid blue, no connection
Waited 20 min and still flashing orange
Can you plug it directly into your router with an ethernet cable? If so pull the plug, attach with an ethernet cable, plug back in and reset one more time. If not you may just have a defective unit, one other thing you can try is to switch the power cord with another unit. I'm not sure with the Google but the Eeros I have had issues with power supplies not putting out enough power, they light up the unit but will not "run" the unit. Hopefully that helps.