Motorola Moto Edge (XT2141) screen replacement

Поділитися
Вставка
  • Опубліковано 30 лис 2024

КОМЕНТАРІ • 19

  • @j0dor
    @j0dor Рік тому

    Great video. Exactly what I was looking for

  • @Kango69
    @Kango69 Рік тому

    The tape width you’re using would’ve been very helpful.

  • @sqs.555
    @sqs.555 5 днів тому

    I dont trust 3M tape, did you had problems with it? Glue seems like a stronger bond.

  • @excalibur1812
    @excalibur1812 Рік тому

    Nice video. I have the edge plus 2020. I dropped it a few months ago & was in a case but still shattered the bottom right corner of the display. It wouldn't respond to touch, so I ordered a new screen. Looks like new again, but after I got it all together & sealed, the sound and microphone don't work. I replaced the speaker assembly today with a new OEM one, but still no sound. I would really like to get this phone working again. Do you have any suggestions?

  • @adiele.bellov.817
    @adiele.bellov.817 Рік тому

    Hello, they changed my screen in a shopping center and it turns on and works, but I see it very opaque, with low brightness I already raised it to the maximum and it still looks like that, as bluish and with light the cell phone does not look good. They say it's normal?

  • @BillAnt
    @BillAnt Рік тому

    I always mount the tape onto the edge of the screen glass and trim it where needed, since it applies easier than on the frame. Of course it helps to have 1, 2, 3, 4, 5 mm 3M wide rolls of tape to match any kind of screen. Oh, it makes me cringe when I see some inject gunky glue instead of high quality double sided tape. Yikes! Also the tape makes it much easier to replace a screen again than having to scrape off all that glue crap.

  • @theuncrownedkings5208
    @theuncrownedkings5208 Рік тому

    Hey brother what is the mm of the tape you used in this video for this repair

    • @BillAnt
      @BillAnt Рік тому

      It's best to have 1, 2, 3, 4, 5 mm wide 3M brand rolls of tape to match any kind of screen. They aren't that expensive per roll and lasts for hundreds of jobs.

  • @SameerSheikh-n7w
    @SameerSheikh-n7w Рік тому

    Bhiya edge dipslay hai ya paper lcd hai

  • @gsprings43
    @gsprings43 10 місяців тому

    would be nice if you told the model year

    • @fixologytechrepairs
      @fixologytechrepairs  10 місяців тому

      Sorry I thought I mentioned the year. It is a 2021. You can always double check the model number with websites like GSMArena.com

  • @creativ8278
    @creativ8278 2 роки тому

    hello, is the display from xt2063-3 suitable for xt2063-4?

    • @fixologytechrepairs
      @fixologytechrepairs  2 роки тому

      I'm honestly not sure. I haven't ran into a 4 yet. Could be maybe a different generation or iteration of the same product. I'll have to look into this.

  • @michalwiertara
    @michalwiertara Рік тому

    the black film is for heat dissipation

  • @allancanales2867
    @allancanales2867 2 роки тому

    Hi, i can't found this display, is compatible with moto G200 display?

    • @fixologytechrepairs
      @fixologytechrepairs  2 роки тому

      From what I was able to research I don't believe they are compatible. Try Fixez.com they are where I get most of my parts from and it is where I got that screen.

  • @rickyleblanc3945
    @rickyleblanc3945 2 роки тому

    Those wire snips are not designed for cutting tape.

    • @fixologytechrepairs
      @fixologytechrepairs  2 роки тому

      Yea I know. It's what I had lying around at the time. Couldn't find my normal scissors.

    • @j0dor
      @j0dor Рік тому

      Of all the things to say about such a helpful video and you choose this? Nice.